Jump to content

Recommended Posts

Well I haven't gotten to play with them yet but I did get to see some live demos at free RPG day.  I liked the way the yellow bone and wyckwood came out the wood color didn't come out and either.

 

Green did pretty well.  Bug losers I saw were the blues and reds, but those were on smooth surfaces and they seem to universally fail at those.

 

I get to try some on Monday when I get home.

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

  • Replies 84
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

It's interesting stuff. I'm firmly in the "play with new tools so you know what's out there" camp, so I picked one up and did a few tests. 

 

I tried mixing several mediums and paints to see if I could match what is happening with it, the closest I came was Greenstuffworld's Master Medium (I absolutely love this stuff, BTW, everyone should check it out) + Reaper Clears. Unfortunately, that doesn't really lend itself to speed painting as the clears only come in 6 (? I think) colors so nearly everything would end up a custom mix.

It still might be cheaper, but whatever. They are pretty good at what they do, but to me they look half done. I think it still needs thinned if you want to get away with them as the only thing on a section, otherwise the coverage is a little too intense on flat areas. I think, if I decide to use them on a project, it will be for one major section of an army (like orc skin on 100 orcs, or something), then everything else would get traditional paint, and I'd still go back and highlight the skin a bit. The shading on them is as advertised, but the auto-highlights are hit or miss depoending on the model's texture.

  • Like 4
Link to comment
Share on other sites

I see these contrast paints and all I can think of is how much it looks like what you get with Future ( now Pledge ) Floor Finish (Its Acrylic) mixed with regular paint. Future keeps the pigment from separating, and works great with craft paints. 1 part future to 1-8 parts water, then use this to thin your paints. 

I'll have to dig out some figs. Been using this since I started painting back in 99 or so. 

  • Like 1
Link to comment
Share on other sites

I tried the contrast snakebite leather. It was very similar to a paint the Warstore used to sell. It is very thin and has less surface tension. This makes it sink into the cracks better. They are not bad, but I don’t anticipate needing ant more of these paints. 

 

    Buckyball 

  • Like 2
Link to comment
Share on other sites

Been seeing comments about these everywhere and was curious how they differ from inks and washes we've been using for years? I know I use a lot of the Army Painter washes when I'm doing speed paints.

Link to comment
Share on other sites

8 minutes ago, Zink said:

Been seeing comments about these everywhere and was curious how they differ from inks and washes we've been using for years? I know I use a lot of the Army Painter washes when I'm doing speed paints.

Difference is mainly in the medium I think.  It's closer to a glaze medium.  If you don't get to carried away glopping it on, it has enough tension to hold itself in place unlike most washes.  Also dries faster than most of my washes.  I think of it as somewhere in between a wash and a glaze in consistency.

  • Like 3
Link to comment
Share on other sites

1 hour ago, Erifnogard said:

Difference is mainly in the medium I think.  It's closer to a glaze medium.  If you don't get to carried away glopping it on, it has enough tension to hold itself in place unlike most washes.  Also dries faster than most of my washes.  I think of it as somewhere in between a wash and a glaze in consistency.

 

Sounds similar to some transparent paints I have from Vallejo. They have a higher ratio of medium to pigment so they aren't watery but work well for shading and such.

  • Like 2
Link to comment
Share on other sites

9 minutes ago, Zink said:

 

Sounds similar to some transparent paints I have from Vallejo. They have a higher ratio of medium to pigment so they aren't watery but work well for shading and such.

I don't know that I would go so far as to say these aren't watery, just not as prone to running as a straight up wash. 

  • Like 3
Link to comment
Share on other sites

On 6/9/2019 at 3:11 PM, JackMann said:

One caution: They will not go on over bare Bones. They're too thinned to be able to find purchase. You will need to prime the Bones first. The good news is that you don't need to use their included primer. Any white or near-white primer will work well enough. It flows a little better over their contrast primers due to the satin finish, but they'll still get decent results with, say, Vallejo white primer.

 

This is the one question that most interests me: What are the properties I need to look for in an undercoat to get the best out of contrast paints? I am interested in playing around with them, but the investment in GW's purpose-formulated primers is more than I really want to drop just to play with it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...