Jump to content

Bestiary 3d stl models


Recommended Posts

https://www.kickstarter.com/projects/266656159/bestiary-3d-printable-models

 

As I backed Brayan's previous KS but never got my files (I got a email in regards to this KS) but a quick email response & I had my file that I backed + a bonus file. Love the look on the minis. The goblins can be new PC gobs for ReaperCon We Be Goblins. Love the Oriental dragon as well.

  • Like 1
Link to post
Share on other sites
  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

This is a talented 3d designer, but many of the stonework walls and such from the earlier campaign I backed have all the stones neatly stacked like in  grid, or as if they were tiled like a bathroom, not alternately laid like in an actual wall would have.

This either means the designer has not looked very hard at actual stone or brickwork, or has cut some corners there with the detailing to finish faster. This was a tad dissappointing as either way, I won't be printing out those, as that sort of lazy detailing sticks out like a sort thumb. Once seen, it cannot be unseen.  If I had seen that before hand I would probably not have pledged as I do not have any use for the files.

Link to post
Share on other sites
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Mckenna35
      I know there are a few folks that do Bolt Action and similar 28mm wargaming (@buglips), so I thought I'd bounce this out there.
       
      https://www.kickstarter.com/projects/tftb/world-war-ii-soviet-railroad?ref=discovery_recommendations
       
      Story
      Railroads are an important means to transport troops, equipment, ammunition and all other kinds of supply to the front. Especially in a country as vast as the Soviet Union with it's endless steppes, only few reliable roads and no major rivers running in the direction of the German advance during Operation Barbarossa in World War II. 
      With this set of detailed buildings and rolling stock in 1/56 scale for 28mm figures you get the opportunity to recreate the crucial fighting around the Soviet railroad system.
      The kits focus on the major pieces of rolling stock available to the Soviet defenders: box cars, gondola cars and flat cars. And the mighty ALCo RSD-1 Diesel Engine which was made available under the US Lend-Lease Act.
      Also included is a typical rural train station with optional additional platforms for all who want to depict a Soviet - or captured German - supply depot, where heavy equipment like tanks and guns are being unloaded.
      And for all of you looking for an armored train - don't worry! We have you covered.
        Talking about railroad tracks:
      We did not see the need to reinvent the wheel, so all kits are designed to be used with
      4Ground Railroad Tracks (available as add-ons to the Kickstarter) or O Gauge Model Railroad Tracks The kits include optional parts enabling you to choose your favorite system while assembling. Going this route has allowed us to concentrate on designing and producing the rolling stock only, which has the advantage of an earlier fulfillment date for the Kickstarter.
      All models are highly detailed on the outside and inside. The interiors are easily accessible, as roofs are removable. In addition, all doors are moveable, which means you can open or close them during gameplay.
       
    • By Ganryu Kojiro
      A Viking Girl sculpted by Bobby Jackson. She was a lot of fun to paint since she had a lot of canvas for freehand work. She is also my first serious effort at NMM, so that's a well I plan to return to.
       
      I came to paint her when I asked my friends which model needed to get some love next. I presented a wizard, a ranger, and an armored lady fighter. One chimes in that she'd like to see the fighter (she being a practitioner of HEMA). Her boyfriend mentions something about boob armor. I said, no, she's got pretty normal armor. You want to see something egregious? THIS is egregious. My HEMA friend immediately says, "I'd like to change my vote." So here we are.
       
      Here's the WIP thread for her. Here's my next piece.








    • By Sylverthorne
      https://www.kickstarter.com/projects/vaspider/symbols-of-faith-and-pride
       
       
      This has sod all to do with miniatures, but I would be surprised if there were not people who might want one of these pins, for literally any reason at all.
      I'll let the campaign speak for itself, as I usually do; it is pins. There are, as the title implies, representations for most of the common faiths, in a literal rainbow of ... well, Pride rainbows. 
    • By Sylverthorne
      https://www.kickstarter.com/projects/dogmight/kickstarter-exclusive-fire-dragon-valhalla-screen
       
      "You take your game seriously. Now it's time for a serious screen.
      In October of 2018, Dog Might released the first fully sculpted GM Screen, the Valhalla Screen. Since then, we have released over 30 more designs, including officially licensed screens for: Pathfinder, Call of Cthulhu, and Vampire: The Masquerade. We have also designed screens for you favorite shows, such as Relics and Rarities and the Critical Role stream of Undeadwood. Over the last year and a half, our Valhalla Screens have proven to be our most sought after product. "
       
      ... Would it surprise anybody here to know I want one? 
      If I can't have one, at least I can spread the word. ;p
    • By Sylverthorne
      So.. I fell over this. It's... well, go look for yourselves; 
      https://www.kickstarter.com/projects/159974695/badbandana-6-pizza-dragons 
       
      ... pizza and dragons. Where have I seen this notion before..? I can't quite... >.>  
  • Who's Online   10 Members, 0 Anonymous, 33 Guests (See full list)

×
×
  • Create New...