Jump to content
Sign in to follow this  
Lidless Eye

Lidless Eye: Depths of Savage Atoll (3D Print)

Recommended Posts

Hello,

Now that the Kickstarter project, Depths of Savage Atoll, from EC3D Designs, is through the funding phase, I thought I would share some of my painted examples of the FDM print tests.

All were done on an Ender-3 (mostly stock other than a mirror bed and a metal extruder replacement)



The group:

20190530_000940.thumb.jpg.742e3eaae9a0e3a7cfc108717a5e982f.jpg

 

 

Merfolk:

20190410_014738.thumb.jpg.f8e047ed68ab14169f866eab62b98466.jpg20190410_014808.thumb.jpg.500805bf337d9adbf80c48e77c4f790a.jpg

 

 

20190410_014704.thumb.jpg.bbda9e70cbdf62af4cfb659545e9d465.jpg20190410_014721.thumb.jpg.c5d5056cfcacf9165eacae8b98bddb17.jpg

 

20190410_014423.thumb.jpg.fa41df9da4186b1ad011961dfd2402c4.jpg20190410_014523.thumb.jpg.28711570bb823883bf3695787cb092b7.jpg

 

20190410_014537.thumb.jpg.0fca3b92f19a34006b38f15d0323052a.jpg20190410_014553.thumb.jpg.91228cd0967a0973b4dde3311aaadb47.jpg20190410_014606.thumb.jpg.cc1c13e4a06596a4c67c15ef1e0a6897.jpg

 

 

Merrow:

20190514_190332.thumb.jpg.772cc9aec507eb8ecf545c662597f87d.jpg

 

 

Kraken Cultists:

20190403_230654.thumb.jpg.45beb2cbe3b7aa04711047be2902a930.jpg20190403_230711.thumb.jpg.3973161252e30d7fa298bb1c12ba3811.jpg

 

20190403_230529.thumb.jpg.7e48b30368a9d2d0c2c0f43f65cbfec9.jpg

 

20190403_230545.thumb.jpg.a7bc9d20bcca40bf94071d78caaae678.jpg

 

20190403_230826.thumb.jpg.0a3546f9354da2e9803bc6995aa57346.jpg

 

20190514_190305.thumb.jpg.cca731fab43845992f3780f3379a7025.jpg

 

 

Water Elementals:

20190514_190234.thumb.jpg.639314c501ecdf3ff09badf9b57452be.jpg

 

 

Giant Octopus:

20190514_190245.thumb.jpg.fc9332587c37662700594806b851f01d.jpg20190514_190254.thumb.jpg.8680db127e98ab2e4d48bf15c4f7aa77.jpg

 

 

Deep Devils:

20190514_190153.thumb.jpg.a3e057c7ad78f0510a66d5ec324eb8cd.jpg20190514_190206.thumb.jpg.1ca9937ae5ba6c9790481584fa95bb7b.jpg

 

 

Shark Men:

20190530_001042.thumb.jpg.4312af7b16991fa5c991e3d5d02b3d37.jpg

 

20190530_001217.thumb.jpg.fcb0079a7c30304eb781bfe70d1d1816.jpg20190530_001204.thumb.jpg.21d9ed3a6153c58b68f780d8b7ab7e2f.jpg20190530_001151.thumb.jpg.1a2b7846b0cc78a347b12bfb30365881.jpg

 

 

20190530_001138.thumb.jpg.69fa531346525cb9da5a78887e7930c5.jpg20190530_001122.thumb.jpg.da3f98ef7dfe3ec152bc4f928980ba4b.jpg

 

20190530_001108.thumb.jpg.b37d02ea6d3c290a238b2f5351c1f80e.jpg20190530_001055.thumb.jpg.4c27cdf7a39db6d5f5acc94da410096c.jpg

 

 

And what Sea campaign would be complete without Pirates?

20190429_121330.thumb.jpg.bf13da6671051b1c5e1b7fef841eb8e6.jpg

 

20190429_121402.jpg.83cbbf632340c877042d0b7a7117302f.jpg20190429_121343.thumb.jpg.a4477e43f5c2b33be161cf053c6c844e.jpg

 

20190429_121432.jpg.b57b3cc00b8e9b427694875764a48023.jpg

 

20190429_121456.thumb.jpg.f3e04a7a472427eff89fea6301958317.jpg

 

20190429_121508.thumb.jpg.26ad07a32a9288ac8d6556ee95b80ab8.jpg

 

20190429_121523.jpg.8ce1cb4e1450b8fc98ce38e9205dc041.jpg

 

20190429_121534.thumb.jpg.2b370e27482f07a95f31ef30d8df3698.jpg

 

20190508_175039.jpg.e43d1a5eafadfbc68900fa58c39ef211.jpg

 

20190508_175112.thumb.jpg.f9d892b9b74bbe91e1a31191e436ad52.jpg

 

20190508_175151.thumb.jpg.42284fd0fa9c8bc38480fa951b69f282.jpg

 

20190508_175209.thumb.jpg.193eac308444d583b201673ff2d49122.jpg

 

20190508_175229.thumb.jpg.7c81a79d6cfc3fb842a880b41deae433.jpg

 

20190514_190129.thumb.jpg.f2a881e03338c2904bee75b07343df06.jpg

 

20190514_190108.thumb.jpg.32d4440205e89a52a94da659484ae3ff.jpg20190514_190118.thumb.jpg.23d0dec46bf1d0e294a41bb55a9fc947.jpg

  • Like 20

Share this post


Link to post
Share on other sites

Not the highest quality minis I've seen but it wasn't long ago people said there was no point in trying to print a 28mm mini with a fdm printer. I like them.

  • Like 2

Share this post


Link to post
Share on other sites
54 minutes ago, Rigel said:

Dang, you've been busy! I need to get my hands on some of those Kraken Cultists! 


Just to note, these were as a test FOR the Kickstarter, so I had a lead ;)

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By jdizzy001
      I would love to run an campaign where a holy paladin hates demonkin due to his biases as a defender of the righteous and then, thru the course of the campaign he falls in love with a demonkin lady. Torn between his moral code and his heart the paladin must choose between duty and love. That was the inspiration for this mini which I designed on Heroforge. Sorry the picture is so overexposed, I am struggling to work with my new camera phone.
       

    • By Sanael
      A friend with a 3D printer made this for me. I spent about an hour painting it, and it's now an NPC in my Eberron campaign.


       
      Painting was odd because it's not a very clean print, there are lots of little fibers and print lines on it which obscure detail. I painted very quickly with a lot of wet in wet blending. I'm quite happy with the result given the amount of time it took and the nice-at-arm's-length blending.
       
      My friend is continuing to work with the printer, so eventually he's going to print this up again at a higher quality.
       
      The design is on Thingiverse if you like it.
    • By Mckenna35
      https://www.kickstarter.com/projects/674003445/chibi-siblings-of-conflict-miniatures?ref=friends_launched
       
      About
      The siblings  of conflict are here!
      Attack! this interstellar army of hardboiled girls are ready to conquer your tabletop! Assemble unique squads with powerful weapons, led by brave leaders. They're cute, they're rowdy, they are the siblings of conflict!
      STRETCH GOALS
      We're planning amazing, unique hero characters, and more! Surprises await! New Stretch Goals will appear as the campaign advances!
      Chibi miniatures!
      Chibis are adorable characters that have lately have made a splash in the boardgaming and miniature community with games such as Super Dungeon Explore, Arcadia Quest, Ninja All-Stars and many others. They're also featured in collectible figurines and in other geeky paraphernalia.
      This is the NINTH Chibi KickStarter run by Impact! Miniatures and Impact! is partnering with  Märchen to bring you some incredible, new Siblings of Conflict chibi miniatures along with sci-fi allies & enemies for them to combat!
      The funding goal will pay for the sculpting & 3-D printing of the miniatures.
       The Miniatures    
      ALL miniatures in this KickStarter are provided unpainted. Unless otherwise stated after the name of the miniature, all miniatures offered with this KickStarter will be high quality 3-D prints done on a top end 25 to 50 micron printer (you should not see print lines after priming and paint).   As stretch goals are reached we will unlock additional sculpts.  The miniatures will require light clean up, being primed before painted and might need some assembly (although we will do our best to keep the figures with as few pieces as possible).  
      You can use your reward dollars to get any of the miniatures in the listing above.
      Miniature Quality
      While many of the miniatures in this KickStarter will be 3-D printed, the quality will be a very high level since they are 25 to 50 micron 3-D SLA prints which are very different than ABS prints.   Below is an extreme close -up example of a printed figure and how it shows no print lines when primed and painted (with no other prep work).    Many thanks to Yeji Kim for her painting of Vanguard Leader Anna (top row) and Jason Turner for the painting of Vanguard Leader Anna and Vanguard Trooper #3 (bottom row)!
      Shipping   
      Shipping will be charged in the pledge manager after the project.  At this time we are estimating $5 for US backers, $13 for Canada and $17 for Rest of World. Shipping of the KickStarter will be EU Friendly and should not incur any customs fees.  
       
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/263291121/desktophero-free-3d-printable-character-maker?ref=nav_search
    • By Lidless Eye
      Seeing as there wasn't a thread yet, I wanted to share another project that just hit Kickstarter, "DEPTHS OF SAVAGE ATOLL"

      It's a great project I was happy to be involved with, doing some of the FDM print testing.  Everything looks great and prints well!

      https://www.kickstarter.com/projects/ecaroth/depths-of-savage-atoll-3d-printable-tabletop-model/description
      Welcome to "Depths of Savage Atoll" - an island chain on the edge of the world where the currents of the ocean, waves of the sea, sands of the beaches, and old-growth of the jungle are all teeming with life, adventure,  and countless dangers.
      Enrich your tabletop RPG or wargaming experience with 3D print-ready minis, monsters, terrain, and buildings from island, nautical, and undersea environment.
       
      This Kickstarter provides character minis, monsters, scatter terrain, buildings, and more for you to produce at home on your FDM or resin 3D printer. Rewards are for digital STL files to print the products shown and described in this campaign. Rewards are split into two categories: Scatter, and Minis - designed to be used together or independently, and all for normal tabletop gaming scale (28-32mm).
       



       
       
       
  • Who's Online   36 Members, 3 Anonymous, 33 Guests (See full list)

×
×
  • Create New...