Recently Browsing 0 members
No registered users viewing this page.
Question, can a highlighter be used for miniatures?
Short answer: NO
Long answer: It rubs off when dry, even if mixed with mod-poge it rubs off. And even if it did not, when it dries it turns to normal light yellow and loses its hilighternessity.
Fluor paints I have tried not only look better in normal light, but glow in that blue ultraviolet light as well.
Images removed with forum complience
Hello there fine followers of the fine Reaper faith and Happy Fourth of July for those in Gringolandia!
So here is my Shadowrun Dryad, made by Ral Partha, probably sculpted by Jim Johnson in 1996 if you choose to believe the bottom of the base, and I do.
I did her the same time I did the Night Elf I also just recently posted, but one of the eyes on this green haired chicky poo, I just couldn't get it like I wanted to, so I went back and redid the eye, and I still didn't like it, so this is the third version, which I'm also not super duper satisfied with, but there comes a point when I just give up to move to the next small piece of metal.
So here she is:
and here is a close up of her eyes. Her left one hs that spoke that I just didn't get closed properly. From really close it's very noticeable, but only kind of noticeable from afar and I really couldn't tell with the actual figure, only with the zoom of modern technology. I never had these issues back in the eighties.
Anyway, I like some of these Shadowrun figures, because besides being just generally cool, they kind of cross two genres. This one and the other night elf, could easily be fantasy figures, nothing really would orient them to actual science fiction.
So back to the painting table! Enjoy your Independence Day, or in the rest of the world, Saturday!
After some interesting plumbing adventures the family and I are out of the house for the next couple weeks while repairs are made. Knowing that I'd need something to do in the evenings I had to make a tough call. I could gather up my painting supplies or I could grab one box, a knife, glue, and clippers. I obviously chose the easier route. So during our little forced vacation I'll be assembling the Robotech RPG Tactics starter box and giving you my thoughts on it. Not that I think anyone particularly wants to hear my thoughts on it, but if I'm going to build all this I'm going to talk about it.
Before we jump into it I do want to mention that if you've ever heard anyone talk about this set I'm probably going to say a lot of the same things. I do however think I bring at least one new idea that somewhat redeems this box or at least changes the way you think about it.
Right off the bat I've got to say it does have a nice box. It's fairly solid and the art not only on the outside but on the inside is a nice little addition.
When I first bought the box it was my intention to build the three configurations of a Veritech and stop. I already have too many projects and this was to be the reward after completing everything else. You better take a look at them before I start ranting.
It was during the build of these first three models that I couldn't help but notice problems, you know the very ones we'd all already been warned about. The instructions are not always clear, all you get for each model is a deconstructed picture that can leave you guessing. Then to make it just a little more fun some components that are shown as being multiple parts just aren't. There is nothing like searching a sprue for a piece needed to complete a part before you realize its already attached.
Then of course when it comes to "fiddly" bits these may be the fiddliest I've ever seen. There are a ton of parts that are tiny to the point of the simple act of removing them from the sprue breaks them. Remember this because we'll definitely be coming back to it.
Even the larger pieces have their problems though. Most of the bigger pieces are multi-piece parts for no real reason. Maybe they're there to lull you into a sense of false comfort right before you start in on the "fiddly" bits.
Now we come to the sprues themselves. They're not exactly horrible minus the times when you break a "fiddly" bit trying to remove it but they're not great.
After only assembling three I really wondered how they'd stand up to use on the tabletop. Even for display pieces they feel fragile. The detail is there but the construction and contact points are just bad, again we'll get back to that.
Confidence was not high after the first three figures. Then came about our impromptu vacation so I pressed on with the assembly and next up were the other Macross defenders, you know the cannon fodder, the Defenders and the Tomahawks.
This is where I hit my stride. Overall I assembled them quickly, with many of the same complaints, but by then I'd become familiar with the idiosyncrasies of the set. It's also where I had the revelation that completely changed my attitude.
You see these aren't miniatures and they really aren't game pieces, they're models. Models complete with all of the "fiddly" bits and needless multi-piece assembly you could expect. Once I started to think of them as models it bacame easier to accept the flaws and oversights. I couldn't exactly forgive or forget them, but at least they made a kind of sense. They're made like a Gundam model where the real accomplishment isn't in building it, it's in the fact that during the assembly you never threw it against the wall.
Armed with my new outlook I started work on the special Zentraedi models. Even with the new outlook there were issues. Here are some "fiddly" bits I broke while removing them from the sprue. See just how tiny some of them are?
Oh and remember those contact points I mentioned?
That's how a leg attaches, a leg, you know the thing that is meant to support the whole model.
Eventually I did complete the three special models however.
After reading all that it would be easy to think I hate this box. It'd be even easier to think I wouldn't recommend it. Even with all the issues however that isn't the case. I think under the right circumstances, I can recommend this to everyone they just have to meet certain criteria.
Firstly you need to be a fan, because you'll need that love of the source material to keep going. The box needs to be on discount (bought mine for about $50 and that seems fair). It also helps to know exactly what you're getting into; before buying I'd already heard plenty of horror stories (still ended up buying it and I'm glad I did). Finally you need to think differently about the figures themselves, honestly once I started thinking of them as models like Gundams or even highly detailed planes everything bacame easier. If you check all of those boxes this is probably right up your alley. Don't ask me about gameplay however I already know I'll never find someone to play with, I just wanted the models.
Who's Online 29 Members, 2 Anonymous, 41 Guests (See full list)