Jump to content
Sign in to follow this  
Rahz

Foam boat for D&D

Recommended Posts

As my players are going to be floating around the Darklake in the Underdark for the next few sessions, after drawing it the first night, I thought about trying to build it instead.  We use the grid and my players floundered when we tried to do away with it so trying different ways to incorporate it into the build. 

 

Playing with wood texture.  My one cut was horrible and it ripped more than it cut. 

C83BCB31-9FB4-492A-A593-98A0A47F1009.thumb.jpeg.a207fca4d2f35d2f913cb04f7ca7ea67.jpeg

 

Used chipboard templates to guide the curved cuts. 

61FD86D3-B5AC-46EE-9719-0630F86FA5CA.thumb.jpeg.29be7b87e13cabaf874e1fd5845261c3.jpeg

 

2 different grid options on the front and back.   Like the front but it’s a bit more confusing than just using the “nail holes”.  Will see how the middle goes. 

0636F8E0-38FB-4D68-AC39-AABC5D0B692B.thumb.jpeg.dc960c4f1987942282c76b6d725acc2a.jpeg

 

Thanks for looking. 

  • Like 21

Share this post


Link to post
Share on other sites

Seeing you LOVELY in the works creation got me wondering what had happened to my own foam smugglers. That in turn got be going & I found them.

See...your work is already a source of inspiration. OUTSTANDING WORK!

  • Like 4
  • Thanks 1

Share this post


Link to post
Share on other sites
1 hour ago, malefactus said:

Seeing you LOVELY in the works creation got me wondering what had happened to my own foam smugglers. That in turn got be going & I found them.

See...your work is already a source of inspiration. OUTSTANDING WORK!

So happy you found them!  Thank you for your kind words.  

 

Ive plodded along, made some mistakes and kept on going.  Key mistakes are: forgetting to texture the back side of some foam that is visible, but rather hard to texture now, and the big one, getting the nozzle of the glue gun too close to the foam.   Oops!  Oh well, it’s a Orc-run vessel, I’m sure it’s far from perfect.  

 

F60B7C48-3FE3-4BF9-8719-E41A2F5462DE.thumb.jpeg.c68fbe81c58f144275208aa366f01be6.jpeg

glue-gun damage. 

 

3C9BCC05-997A-41E7-8194-D7B411157638.thumb.jpeg.3523a72c0127fe07bbb4ade738823096.jpeg

side piece was not textured on the back side. 

 

 

All this said, for a text piece, it has been very educational this far.  Have 3 options for the grid on the piece so I can see what works best with the boys, and it’s starting to look like a boat.  Was hoping to get the other side done tonight, but this is the gaming table and it’s got to be clean for the game tomorrow night, so they get to play on an unfinished boat this week.  More progress over the weekend. 

9854AE57-5F8F-4342-82F4-CFC79B183BF4.thumb.jpeg.e57bc0926a337045abd43733a3dc1d04.jpeg

 

Thanks for looking. 

  • Like 12

Share this post


Link to post
Share on other sites

My muddling along has continued.  Knowing nothing about boats other than they are supposed to float, I think it’s coming along.  We used it on Friday’s session and the players were quite impressed, though there were several comments about heading back to town and heading out on land instead... <_<

 

D90550B0-5B6F-4732-9D94-D4FEFFC347B7.thumb.jpeg.00b070a3ae08cf540066fed461e69448.jpeg

 

second side is on and I’ve started adding supports for railings. Took a stab at something to represent stairs up onto the top deck, but as I want then wide enough to place a character on, I felt they were too low.  Back to the drawing board...

 

stuff is is being put away as we’re playing Xwing tonight but maybe I’ll be able to get a mast and steps added by next Friday.  

 

This is what was hiding inside the table (the top comes off). 

E00ADC45-F777-4784-A560-5AE94CB5D363.thumb.jpeg.3851ae38c5e2804db5aa0e9f89ae01f5.jpeg

 

Thanks for looking. 

Edited by Rahz
  • Like 11

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By rubegon
      I haven’t been on the forum much this year.  Since joining Anne Foerster’s Patreon I’ve been spending more time on Discord.
       
      I’ve been painting this guy following the paintalong she’s done for one of the tiers.  It’s the first time I’ve tried to do a “display quality” paint job.  Other firsts are NMM, freehand, leather texture, cloth texture, and sculpted base elements.
       
      I actually started this guy early this year, but then stopped painting altogether for about 4 months after the pandemic started.  I picked him back up in July and am getting close to finishing.  I’m posting a series of pics I’ve taken as I went, and will continue to post as I finish him up soon.

      Feb 29: prepped and primed, with some minor GS work

       
      Mar 1:  base GS sculpting

       
      — LONG BREAK —
       
      Aug 2:  skin lined, basecoated, and shaded


       
      Aug 6:  skin initial highlights

       
    • By Maledrakh
      Nolzur's Marvelous Miniatures still make some great D&D monsters, here are three more:

       
      Wave 1: Displacer Beast
       
      The Displacer Beast is one of the iconic D&D monsters, described as a six legged panther with a pair of enormous tentacles growing out of it's back.  If that is not bad enough, the schtick of this beast is that is displaces.  This is an ability that makes it appear as it is a few feet off from where it actually is, so while the party are slashing at the image in thin air, the beast invisibly outflanks them with it's powerful claws and massive bite attack coming from seemingly out of nowhere.
       

      Where are the mirrors I need to start breaking?
      I rebased it on a 40mm round. This is a Wave 1 mini, released a few years ago. The tentacles needed repositioning using the  hot water/cold water technique.
       
      Wave 11: Grell & Basilisk
      Grell:
       
      Who names these monsters? Grell?  What kind of a name is that? This is obviously the Flying Spaghetti Monster!
      The tentacles did not turn out all that well. The purple was too strong compared to the other colours and dried too fast to blend. Bah!

      Check out the big brain on Brett!
      40mm base.
       
      And in the same pack as the Grell, a Basilisk:
       
      This one was significantly smaller than I expected. Please disregard the piece of flock-fluff on it's right side middle. This is a loose particle I did not see was stuck there until after the pictures were taken. I just cannot be bothered with taking new ones.

      Nice doggie?
      30mm x 20mm oval base.
       
       
      Nolzur’s Marvelous Miniatures
      Wizkids
      I have no idea who sculpted these, as WizKids do not -as far as I know- publish this info.
      PVC
    • By Rahz
      Another 3D print that I’m working on, this time a big one.  I’ve shied away from buying/printing dragons for the most part as I have a ton of amazing Reaper ones still to paint (or finish... ) but this one was a freebie of sorts from one of the creators I follow on Patreon.  
       
      In keeping with my clear resin tricks, I whipped up the base really quickly and then stalled on how I was going to paint the actual dragon...  oops!  
       


       
      I masked off the crystals and plugged the holes for the feet and primed it with a mix of brown and grey Vallejo primers, drybrushed it with a tan followed by a tan mixed with white and then it got a series of Vallejo model washes (green, grey and dark brown).  I then peeled off the mask and gave the crystals a quick coat with Tamiya Clear Green.  
       
      For the actual dragon, the plan now is to paint the heavier scales like the base with the softer belly and flesh being brown.  
       

       

       

       

       
      Like my recent plague doctor bust, I masked his eyes so they will be the same green as the crystals on his base.  I toyed with putting a light in his head as well, but seems to be doing that to everything all of a sudden, and skipped it.  
       
      in case you’re wondering about the pink, that’s what mixing the Vallejo red and grey primers did. The base was that colour before the drybrush and washes. 
       
      Hoping to get some more work on the brown and get the drybrush done on his scales this weekend.  That’s going to be a lot of drybrushing!! 
       
      Thanks for looking.  
    • By MoonglowMinis
      So for awhile now I've had this goal, nay, this desire, nay, this primal compulsion to build a boat.  It is not enough to have hand drawn maps, or 2D terrain tiles.  I need a fully functioning 3D boat!  Well, maybe not fully functioning.  But I want to build a cool boat!
       
      I've been working on a nautical campaign full of swashbuckling, sailing, and sea monsters for a few years now.  It's my White Whale project.  Always just on the horizon.  It'll happen some day, but in the meantime, I have a million small projects to complete and extend the chase.  One of which is my desire to build a few different sized ships to enliven any possible naval combat.
       
      I actually attempted this about two years ago, just winging it and making some measurements and throwing them at some craft supplies.  I wanted a cheap option that wasn't too difficult to repeat that way I wouldn't be discouraged from making multiple ships.  So I limited it to cheap crafting materials like foamcore, wooden dials, popsicle sticks, and thumbtacks.  And the result wasn't  bad.  Especially for my first attempt at any kind of terrain building.


      It actually turned out rather nice!  To my surprise.  But I got hung up on mast and sail designs and never finished.

      The wood on the deck had 2x1in grid carved into it for easier D&D use.

      and the figurehead was designed to be modular.

      However, overtime the boat collected dust and little scratches.  I should have given it a coat of mod podge or sealant of some kind, but never did.  And eventually it had an unfortunate run in with an injured owl that we took in for a night.

      Here's the little devil himself.
       
      Anyways, I put this project on the back burner for long enough and feel inspired to dive back in.  Especially with a certain Bones ship on the Horizon that I'm still on the fence about getting.  I was doing some browsing on the web and recently found this wonderful little blog complete with loose instructions and a plan from a now defunct wargamming site.  The blog creator had found the old plan and adapted it to build something using most of the same materials I have already stockpiled. 


      There's a few choices that I like better than my first attempt so I think I'm going to use this as some inspiration as I give this boat thing another go.

      My hold up now is still those darn masts.  The original plan above used wood and required drilling out holes for the masts.  The blogger use foam for his ship and found random bits of tubing to house his masts.  I could try to find something random like that, but I was hoping to find something simpler for easy repetition.  And I would also like to keep the masts loose so they can be removed for easy storage, or to swap out the sails.  Any thoughts?

      Any resources, tips, recommendations are very welcome!  I'll post back here with any updates.

    • By AussieAusborn
      Greetings y'all!
       
      I'm starting this thread to use as a painting blog, to help catalog my journey, and to use as a source of ongoing motivation. I have a LOT of stuff I've been putting off, that I want to get through for a homebrew campaign I'm working on, and some warbands for Frostgrave, as well. So, I'll take any extra motivation I can get Once I actually finish pieces, I'll make sure to post them in that part of the forum.
       
      To start things off, I have a dragon I've been working on for a couple of weeks, and just got to the point where it's "good enough for now," although definitely not finished. It's easily my favorite piece I've ever owned, so I put off doing any work on it until I was "good enough" to do the piece justice. That is, until I realized that would never happen , so I decided to:
       
      1) Do the darned thing
      2) Do some work on it every day
      3) Push myself outside my comfort zone to try new things
      4) Be patient and forgiving with myself
      5) To not freak out when I try something that I don't like, and just go ahead and fix it
       
      There's still a good amount to do to it (I have a list with 15 bullet points on it, and growing!), but I'm happy enough looking at it, and want to take a break to focus on some other pieces.
       
      I took some progress shots (though perhaps not as many as I'd have liked). So please, join me as we journey through my learning experience:
       

       
      I fully assembled the mini before putting down any paint. Here's where the mini was after a couple days work, about 4-5 hrs. I used an airbrush to give it a zenithal undercoat with black and white, and then to lay in the base coats of the red and blue. I then painted the underbelly and the wing-fingers with a brush.
       

       
      Here, I'm trying to show the work I've done (still fairly subtle, at this point) on building up the vibrancy/transitions on the red skin/scales. I was fairly happy at this point, as I could start to see that I might actually be able to paint this to the standard I want.
       

       
      The next day, I did some work on the face, horns, and blocked in the body spikes. I generally liked the mouth and tongue, but felt it was a bit vibrant. I thought the blue on the horns was alright, but also wasn't completely sold on it.
       

       
      Here's where it was after another `30min of work. Since I felt the tongue was too much, I did something about it! I did a very light glaze with a grey, just to knock down the saturation a bit. Looks better. I added some more blue to the horns, and still wasn't quite happy with it. Picked out the teeth, which is nice, easy bit of definition. And that eye!!! It looked much better than I expected, although that's the last time it would be that well defined...
       


       
      Here it is after another couple days of progress, building up that red (it takes soooooo long on something this big!!!!), as well as more work on the mouth/face. I'd accidentally painted over the eye (which becomes a recurring theme in this tale ), so I blocked in some color, just to separate it from the face. I added a glaze of 'RMP's fair skin' to the tongue, and now I'm lovin' it. Also added some fleshy-ness to the gums on the upper jaw (though it's a little hard to tell), and that was definitely another good decision.
       

       
      Here I continued to build up the red, progress is slow but steady. Not pictured (which is unfortunate, because it was a good learning experience) is my attempt to redo the horn entirely, to a scheme that was a transition of bone to brown to black at the tip...I was really unhappy with it. I had the bone starting around the eye ridges in at attempt to add more contrast and draw the viewer's eye towards the face, but it just looked awful. So I spent a good while redoing the horn and fixing the whole face. I'm glad I made that mistake, as I think the face looks much better than it did before I started on the horn. Part of that was adding in a new level of bright highlights.
       

       
      Here's the mini in some soft lighting, and although the picture is kinda blurry, it better shows the transitions throughout the red. I think this was also the point where I started working on shading the red, by applying a light blue-black glaze to the shaded areas, which really helped add some contrast to the piece.
       

       
      I had an accident that almost gave me a heart attack, where the figure seemingly jumped off the desk Luckily, I caught it before it hit the ground, and it sustained no major damage. It did separate where the dragon attaches on to the base, and although that was a little frustrating, it ended up being a happy little accident, as it made it MUCH MUCH easier to work on the base. I started by putting down some paints and pigments, until it was at a place I thought was ok. Also, the rock spire that it's curled around was originally about 6 inches taller, which I cut off to better see all of the dragon. So, I started work on sculpting a new top. I started by building up thin layers of cardboard with superglue, to level it off (it had quite a slant to it). Then I mixed up some greenstuff, and tried to match the overall flow and texture of of the rocks. Although not a perfect match, it's close enough to not be distracting. Mission accomplished!! The pillars were a part of the mini.
       

       
      And here's the beast in its current state. I painted the newly sculpted top to match what I'd already done, and left the pillars with a super quick drybrushing. I touched up the eye to look acceptable (it's on my 'to do' list), added some grass tufts to the base, and was happy to leave it be like this, for a time. The final pic is another attempt to 'more accurately'  show the value transitions with the red, though the colors seem a tad washed out.
       
      Thanks for taking a look at my work, and for reading my ramblings! C&C is welcome  As I said, I have a to do list for the dragon, but I'm not afraid to add more to it!!! I'll strive to make a post in here a few times a week, and eventually you'll get to see a completed dragon!
       
      EDIT: I forgot to mention that once the dragon broke away from the base (super cleanly, luckily), I took the opportunity to redo the underbelly on the whole model, darkening it up some. And along the neck, I experimented with wet blending for the first time! I've been apprehensive to try it before, but decided this was a good spot to experiment, as it's a large enough area, but felt less...consequential, I guess, if I messed it up. And I'm pretty pleased with the result!
       
      Next up: Frostgrave warbands for me and my brother!
  • Who's Online   21 Members, 1 Anonymous, 35 Guests (See full list)

×
×
  • Create New...