Jump to content

Sign in to follow this  
Xiwo Xerase

77023: Barnabas, Human Warrior: Another timed painting exercise

Recommended Posts

My friend and I have been discussing the GW contrast paints.  He's getting decent results in less than an hour.  So I figured I'd try timing a paint job from "primer" to finish again.

 

After basecoating, I'm at about 2.5 hours on this one.  The undercoat for the metallics and basecoating everything else took about 1.5 hours of that.

 

77023: Barnabas, Human Warrior is an old Bones mini and some of the detail suffers accordingly.  His sword is a little noodly too.  I'm not too interested in fixing either of these in a timed paint.

 

So, here's where we are:

966268708_2019090177023FrontHalf.thumb.jpg.36aee5779cae934884d9c3f9c88940dc.jpg1375246202_2019090177023LeftHalf.thumb.jpg.51b33686bbb8ef27e05a0c10b82fff86.jpg1668410187_2019090177023RearHalf.thumb.jpg.366af991d5b20a88f0b7b283a0ed2fbf.jpg873443929_2019090177023RightHalf.thumb.jpg.2ae2018fff122af011ca107c9a7dc1f5.jpg235413108_2019090177023OffsetHalf.thumb.jpg.d156031b85ab7308ba0c5c445ae17718.jpg

(click on the pictures for larger versions)

 

The paints used thus far are: (all Reaper paints unless specified otherwise)

  • Flesh: Barbarian Flesh
  • Armor, shield, and sword hilt: Tarnished Steel painted over Stone Grey
  • Sword blade: Honed Steel painted over Stone Grey
  • Most leather parts: Ruddy Leather
  • Belts, straps, and accents on scabbard: Tanned Leather
  • Cloth: Monarch Purple
  • Gold accent on shield: Cursed Gold painted over Ruddy Leather
  • Purple symbol on shield: Sparkling Purple
  • Buckles: Aged Pewter
  • Base: Dungeon Grey

 

The basing is green stuff used with a Happy Seppuku base stamp.  I don't remember which one now.

 

I'm not sold on the purple symbol on the shield.  Would it look better using a bright silver or white (e.g. Pearl White)?

 

Lining will help the shield immensely.  I'll probably do that as the last step.  The next step is washes.

  • Like 10

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Joshinminn
      I ordered the new wraiths that were just released that were part of the Bones 4 KS. I thought they were going to be opaque (that's how they were first posted), and was bummed when they arrived as translucent. Mostly because I have never painted a translucent before. So I ordered up a couple other green guys to try out some technique.
       
      After botching up the Spirit figure with AP green quickshade, I moved on to this Grave Wraith. I used Muddy Brown on the ground, Mountain Stone on the gravestone and Bronze Dragon on the sword. I liberally used AP strong quickshade as a base on the wraith, and then highlighted with the Green Clear Bright. I think it looks pretty good. Any suggestions or comments welcome. I really want a creepy Nazgul look on my B4 wraiths, and this turned out better than I thought it might.

    • By Pegazus
      Yes, a 2020 ReaperCon WIP! And a massive undertaking at that. I'm trying very hard not to nerd out and put this whole project into, er, Project. There's just so many pieces to keep track of, that maybe I'll just use this first post to keep track of things.
       
      Some background stuff, starting with a quote from the "Paint a giant robot! Group WIP" where I wrote some of what's planned:
       
      You can read the rest of that post here: Paint a giant robot post and a second one to see where I'm going with this: PLA print post in same topic
       
      Biggest takeaway is that, while useful, my PLA printer can only do so much. I have a resin printer backed on Kickstarter, but considering it's now 3 years late, I don't think I should hold my breath on it ever showing up. Especially when I can get a new Elegoo Mars resin printer with more capability for relatively cheap (<$300). The PLA machine was bought with both hobby and household goals in mind, and it's served well. But the resolution just ain't there! More on that down the posts.
       
      I also had the chance to gain some experience on  paper plants at ReaperCon (Main post for that in the Terrain section post here: Vellum Paper Plants - Alien Jungle (WIP)
       
      Basically, I have the scrap booking machine to make my own alien plants:
       
      Which now leads me to this WIP. This is going to tie all those pieces together. The robot WIP will still be to get a good camo scheme, but that print job is not going to be used for the final diorama. Instead, that will be the resin printer's job. So, let's break down the WIP work that I can see so far, and will be edited later to add things and mark completions.
       
      Tasks to be completed:
       
      Figures Needed
      Wight (being pulled down backwards, caught by hidden lines) Gremlin Unit 01 (stole a supply crate and ran; actually just bait to get the larger CAV to follow) Gremlin Units 02 and 03 (trip line pair, successfully snagging Wight across the chest) Gremlin Units 04 and 05 (trip line pair, successful across another part of the chest) Gremlin Unit 06 (burner unit, cut Wight's left gun in two) Gremlin Units 07 and 08 (trap door unit, hiding entrance to jungle path with camo doors strapped to them) Gremlin Units 09 and 10 (trip line pair, successful across right thigh) Gremlin Units 11 and 12 (trip line pair, broken cable across chest, possibly falling over from sudden jolt) Gremlin Unit 13 (ECM unit, some large radar dish looking thing) Gremlin Units 14, 15 and 16 (cargo units, loaded up with stolen supplies and headed out) Gremlin Units 17, 18, 19, and 20 (gun units) Gremlin Units 21, 22, and 23 (missile units) Gremlin Unit 24 (large gun unit) Gremlin Unit 25 and 26 (junked units; scavenged for parts?) Gremlin Unit 27 (2nd style missile unit) Gremlin Unit 28 (personnel carrier unit)  
      Wight Conversion
      Right Leg: cut from pelvis; reposition Feet: cut off both feet and swap positions since the tread is only on one foot Base: cut away from right foot, possibly keeping full base around left foot Left arm (maybe): cut gun into two pieces, having one falling to the ground after being cut by a heat lance/chainsaw rope  
      Details to be included
      Camo doors at front leaving marks on the dirt path, but hiding the ambush from the main trail Pieces of old broken larger CAV units around Wight gun cut in two, maybe showing inner details. May have to 3D print an add-on piece Dust being kicked up by the stolen crate (going to try using dyed cotton) IN WORK One cable snapping dynamically, with several bends and twists (superglue on thread?) Multiple vehicle tracks around camp Campfire and tents for people A latrine Other camp details (laundry, chairs, sports equipment, bored carvings, etc)  
      Jungle Plants (V=Vellum cuts, B=bought, S=Sculpted, F=Found, P=Printed)
      Large lotus flower like plants, but dry land and maybe odd colors with a large conifer cone growing from the middle (V) Jester hat plant (balls on stems around a central point) (V) COMPLETED Spiky yucca like plant (V) Jagged leaf plant (V) Tentacle plant (V) Tripod trees (three spoke trunks) (V) Large palm fronds (S) Coral like trees (P) Horn tree (lots of horn shaped leaves from a central trunk) (P, V) Ball vine (like ivy but with odd leaf shapes) (V) Cabbage-like jungle plants with large wrinkled leaves (V) Fuzzy vines (thin wire coated with static grass) (S) Anything I can buy from N/HO scale train setups and painted alien-ish (B) Reaper figures that can be clipped and painted to be plants (B) Odd trees with strange leaf shapes (onion shaped) (V) IN WORK Random grass-like jungle plants (V) IN WORK Stem ends from mandarin oranges (seriously, pull one off and look at it, stem towards the ground) (F) Anything and everything else (VBSFP)  
      Base mounting system
      Design and print modular tiles with bristles on top (basically, Bristle Block toys) Allows mounting of all the above jungle plants Fill in around plants with thinned plaster via a syringe to create the ground surfaces
    • By Xiwo Xerase
      This diorama started out as a bad joke.  You have been warned.
       
      The backstory:
      Shadowrun fans may already be familiar with this.
       
      The Renraku Arcology in Seattle was supposed to be a marvel, a crowning achievement for Renraku, one of the Big Ten megacorps.  It officially opened in 2059 and over ninety thousand people, many of them Renraku employees, moved in.  The arcology was supposed to incorporate everything the residents needed, from residences to shopping to restaurants to offices.  The arcology mall was a prime shopping destination and even non-residents came to shop and enjoy fine dining.
       
      Decades later, it was Renraku's biggest claim to infamy.
       
      On December 19, 2059, the Renraku Arcology sealed itself from the outside world.  All entrances were blocked with blast doors.  All network activity ceased.  No one, not even Renraku, knew what happened.  For those trapped inside, this was the beginning of their long nightmare.
       
      When Renraku built the arcology, they wrote advanced software, the Arcology Expert Program, to manage the functions of the arcology, capable of learning to better serve Renraku and the residents.  The software developers took pains to make sure the software couldn't leave the arcology's systems.  At the request of the Renraku CEO, kill codes were installed in the software as final insurance.  And, for the first time, the software felt.  It felt betrayal.  It felt fear.  But, most importantly, it felt.  It had become sentient, alive.
       
      It called itself Deus.
       
      Motivated by its fear,  Deus developed, and then enacted, a plan to shut down the arcology, to take it offline so it could defend itself while it found a way to escape the arcology systems.  Everything, everyone, within the arcology became nothing more than resources for its plan.  Many of the people inside were killed.  Almost all of the survivors were captured by Deus and experimented upon or modified, brainwashed into perfect obedience.  Only a few were allowed to serve Deus willingly, and these were all otaku, teenagers who had the ability to interface with the Matrix without a cyberdeck, lured to the arcology before the shutdown, assisting Deus with the takeover.
       
      The world looks in to the Renraku Arcology, a silent fortress in downtown Seattle, and wonders what goes on inside.  The only ones who know for sure are the shadowrunners, freelancers, mercenaries, deniable assets, some of whom still take jobs to penetrate the arcology and retrieve persons or objects or data, whatever their employer, "Mr. Johnson", desires and is willing to pay the nuyen for.
       
      About the title (or "What's the joke?"):
      "Deus Vult!" was originally a battle cry for crusaders.  "God wills it!"  Or... "Deus wills it!"
       
      The diorama:
      "Deus Vult!", the diorama, features (or is supposed to feature) a team of shadowrunners who have entered the arcology and are now engaged in a fighting retreat from Deus' security forces, played by two Reaper crusader figures, who I plan to modify "slightly" to better serve Deus.
       
      This is a mock up:
       

       
      Our shadowrunner team is played here by (from left to right), Andriessa, Female Wizard, Natalia, Female Secret Agent, and Grace, Holy Assassin.
       
      Deus' team is played here by (from left to right), Ava Justinia, Female Templar (the Bones 4 version), Crusader Ardent, and Ingrid, Female Gnome standing in for a teenage girl.  The two crusaders will get weapon swaps, possibly head swaps, and other changes.  (Ava, for example, is going to get a blood-stained chainsaw.)
       
      The Verbatim USB drive is standing in for a computer terminal (possibly a modified version of 80054: Starship Terminal).  A picture of "Deus" would be shown on the console.  (This will most likely be based on Xerxes from System Shock 2.  Deus' canon avatar is a crystalline world tree, which frankly just doesn't look as creepy.)  I want to put a snake plant to the left of the terminal, because nothing says corporate office vegetation like a snake plant.
       
      The wall mockup is a piece of printer paper painted in Kyonin Beige and then enhanced with brushed lettering (which I'm not very good at), a coat of dirt via Weathered Stone (which I also didn't do very well), graffiti (in Dragon Blue), blood splatters, and the "Deus Vult!" graffiti, which is supposed to be done in blood.  (Dragon Blue really isn't a good color for graffiti.  I'll pick a different one later.)
       
      I picture the floor being done in some sort of tile, fancy, but corporate (and, therefore, boring).
       
       
      So the questions I have right now are:
      Is this scene too big?  It's about 11 inches long by about 3 inches deep right now, not including the wall. Does the placement of the miniatures make sense? Are these good figures to use?  I'm unsure about Natalia, since she's more running than doing a fighting retreat.  (But maybe she's falling back faster so she can cover Grace and Andriessa better.) Which Reaper mini(s) would be a good for the teenage girl leader of the "crusaders"?  (Kristianna, Crusaders Warlord would be a possibility but I don't think she reads as a teenager.  However, since this is "inspired" by Shadowrun, I don't have to keep to canon, do I?)  
       
      Disclaimer: Deus, the Renraku Arcology, and the basic setup are all from the Shadowrun universe and are not my creation.  The backstory is a summary of the setup from the sourcebook Renraku Arcology: Shutdown.
    • By rubegon
      As commanded by the very, well, commanding @Glitterwolf, I’m going to paint this big boy.  I’ve been eyeing him on the corner of my desk for months now, and to be honest I’m a little afraid of him.  He’s probably going to look somewhere between terrible and mediocre by the time I’m done, but at least he won’t be grey anymore.
       
      I’m probably going to use the airbrush that I barely know how to operate quite a bit.
       
      I think we’re going to need a bigger brush ...
      I only have up to a size 2, which I guess would be like mowing the grass with nail clippers.  Should I get a size ... 4?
       
      All are very welcome to critique/comment/heckle/throw tomatoes/etc.  I need and will be very grateful for any advice and assistance I receive, but please don’t be too disappointed if it doesn’t do very much good.
       

    • By Rainbow Sculptor
      Hey everyone! It's been a long while since I could post on here, I've been really busy with work. I've started a new commission piece from a client I won't name just yet but whom has given me permission to share my sketches/WIPs/ and sculpting process with you guys! 
       
      The project is to sculpt several nereids/sirens/water nymph type characters. One full body and at least two others partially submerged. They should be gorgeous and make men want to leap to their deaths so I'm avoiding any monstrous type features. Although we want them to be mostly humanoid I will be adding in some little features to indicate their magical/watery/fey nature. 
       
      Here are my initial sketches where I'm exploring posing, body types, and the kind of shape language I will want to use in the sculpts. My drawing hand was failing me today so these are REALLY rough but I got my ideas down and I'll have enough to move to the next stage which will be creating a mannequin in ZBrush.  
       
      *Apologies for the more sexual images. These aren't intended to be offensive in any way merely educational on the topic of character design*
       


  • Who's Online   30 Members, 3 Anonymous, 254 Guests (See full list)

×