Recently Browsing 0 members
No registered users viewing this page.
A new piece of work.
This time it's a WWII themed diorama, 1/72 scale (which makes around half the size of a 28mm figure. The diorama itself has around the size of two smartphones.
The whole project is my entry to a painting competition in a German forum and the first finished work since February 2020 - so one year ago.
The main model, PzKpfw IV Ausf. J, is almost 25 years old. I got this model when I was a kid, and I painted it thickly using email colours, but I never assembled it. Last August, when I moved, I found the model and gave it an overhaul, and when February arrived, I took my time to paint it, do the figures and the diorama.
As always: If you like what you see, and you have nothing more to say, leave a like as a nod to my participation in the forums. I don't need "nice", "cool", "excellent" or "awesome", because those words are used way too frequently to mean anything.
When I have got time, I need to get some plywood to cover the outside of the diorama, but, to be honest - I am way too lazy to do it now. lol.
Check my Instagram page for other work, if you like:
Wear and tear is usually a welcome addition to most vehicle models. After all, tank armor is made to take a few hits.
One of the things to keep in mind when painting something like that is the story it tells. Where and how you place it tells of how the damage happened. Rusty areas are older than shining metal showing through- moreso if there are streaks of rust leading down. A combination of rust and metal shows that this is a place where the rust layer gets scrapped off.
This vehicle is from Seedy Tea Publishing‘s Simulacrum Protocol line.
Welcome to our newest Kickstarter! You'll notice this one is a little different. In this Kickstarter we are offering the STL Files of some of our classic models for you to print on your home 3D printers. These files, created and designed by John Bear Ross, offer tons of combinations and entrance into an amazing realm of sci-fi models. These models come scaled in 15mm AND 28mm!
Now, keep in mind, these are for personal use, not for commercial or resale. We own the copyrights and designs but for the sake of this Kickstarter, we are allowing the files to go to you, our loyal supporters.
So why are we doing this Kickstarter?
Short answer…We are raising funds to increase our in-house printing capabilities. This will allow us to develop more detailed models, models in larger scales, and bring out even more product lines. Rebel Minis is growing and we want you guys to be part of it.
But we can’t do it without you, so please consider pledging, and spreading the word!
Mike and JBR
We have only one. ALL the files listed to be available for one pledged amount. You get the files to everything you see scaled in both 15mm and 28mm.
Your pledge of $40 gets the whole kit n’ caboodle. Once again, this is for PERSONAL USE! You do not have permission to distribute, copy or sell the files. *C'mon man, you know that ain’t cool!*
If we reach our goals, we will unlock stretch goals. These files will be added to the reward and download at the same time.
After the Kickstarter ends, and if it is successful, you will get a survey to confirm your email. Later, when they are ready, we will email you the links for download.
Look at all these Glorious Files, they can be yours!
Can I print the weapons and vehicles on FDM and Resin Printers?
Yes, everything should be printable on both types of printers found in common use. Most of our prints are optimized for desktop resin printers like the Anycubic Photon or the Elegoo Mars, but FDM should be able to support most builds. If we encounter files that are too large for resin printers, we will happily go back and supply sliced and optimized files to be printed in smaller chunks
Gun drones, gun carriages, and weapons. 28mm and 15mm. The Gun Carriages and brand new and have never been issued.
15mm Painted Gunbot examples Gunbots and Gun Carriages Painted Example of 15mm Scaled Gun Turret The Sci-Fi Cycle build is a Fan Favorite. Weapon mounts on each side could be scaled for a variety of weapons.
15mm Painted Examples of teh Sci-Fi Cycles With a variety of uses, The Combat Flatbed is a main stay on the future battlefield. The Hull can use the APC Treads from our other armored units, or use the original lifters as shown.
15mm Painted Examples of the combat flatbed MATVs come in both 15mm Classic and 28mm Upscale versions. Weapons turret has options for an M240G, M2 .50 Cal, M134 Gatling, and Mk47 Striker Grenade Machinegun. The MATV Truck is a new addition.
15mm Apache Painted Example MATV Breakdown The Sahadeen's ride of choice, the Gila Fast Attack Vehicle. In 15mm Classic and 28mm Upscale. Weapon modifications for a variety of scenarios.
Gila 15mm Painted example Gila Breakdown The Earth Force APC with a new grav module, treads that can also be used on the Combat Flatbed, the classic turret, and a double-barrel variant turret. There is a lot of flexibility in this model in both 28mm and 15mm scales.
15mm Painted APC Wolverine Example APC Variations APC Breakdown The Titan builds have multiple connection points to create multiple builds with the APC and the Light Tank.
15mm Titan Build (painted) 15mm Scaled Titan APC Painted Example Titan ApC Grav Build Titan Track Build Titan LTH Painted Titan LTT The Merka has been one of our best sellers in 15mm. New to this line is the battle-tank-sized grav kit has well as new small guns for the turret.
15mm Scale Painted Examples 28mm Scale Print Merka Variations Stretch Goals
Below are our stretch goals and if we reach those goals, new STL files will be unlocked! Take a look!
If we reach $2000, All Motor Pool pledges will receive the STL files for the Brand New Titan Battle Tank!
Titan Battle Tank Stretch Goal If we reach $3000, All Motor Pool pledges will receive the STL files for the Brand New Mega Merka Tank... Madness!
Mega Merka Stretch Goal!
Haven't posted this little project here until now, because I was too lazy to translate it and on top of that not sure if it was too much skin or not enough,
so I first had to browse through other pieces of KDM work to check if it was okay.
Found the exact same picture of one of my references, so I thought: Okay - I can try to translate it now.
After my surprisingly effective try to paint skin on this fellow (check ->here<-) I thought: Why not try and replicate the result on another figure. So I browsed through my pile of shame and found a KDM miniature with barely any clothes on her. So I thought: What perfect way to train smooth transitions.
So after wiping off the dust and priming her ...
I started working on the base layers and first shadows.
After I had applied some more shadows and highlights, I noticed I had defined the thin red line between the muscles of her thigh a bit too strong ...
And in the process of painting her feet, I somehow lost her toes - Oh, my god!
So while I was working on the other parts of her body and slowly building up the paint, I tried to work on her right thigh and on her right foot and get back the definition of the toes.
So after a full day of recovery operations, I finally had a look at my corrections and was surprised ...
In the end I had undone all my previous work and recreated the wrong transition ...
But I found the toes! Yay!
The outlining was a bit too strong, so I had to correct that as well ...
But I managed to make her skin surprisingly smooth.
In the end, I had to repaint the whole muscle section I worked on for a long time.
But now she's got beautiful buns and thighs
buns and thighs
Time for me to map out the other body parts ... making progress. Wonderful!
And while I am fighting her skin, Rhini took a reference book for NMM (In German, I used this to joke about metal painting rhinos - but unfortunately this only work in German)
But ... to be honest. I have no idea how I have to paint her dagger. I really don't know. I've got to think about it. I've painted NMM only once - it was okay, but not enough to make me feel safe doing it.
Well ... we will see.
Yes! We can do it again! Let's make a tank! Let's make a beautiful tank!
Once again, it's a diorama project based on a game scene, once again, it's Combat Mission.
In this particular diorama, the commander of a Panzer III M is a reallylucky person. In a shootout during the Let's Play of German wargaming channel "TaktikfuchsTV", his Panzer III got hit around 20-25 times, prompting everyone to believe that this particular tank was dead. And I mean ... DEAD!
But to everyone's surprise, the crew reentered the vehicle and drove away - going like:
Here's the scene:
Kauder reenters his tank (In German)
So I got me a commanders figure and a tank ...
First off, some pictures to see what this project will look like:
So I got me a Panzer III from Tamiya and started to do some minor conversions ... and over the course of one afternoon, this vehicle was finished.
I am really proud of those selfmade smoke launchers.
The vehicle will be displayed with open hatches. That's a challenge due to the really lame interior, but that's not a problem. I'll use colors to make the less detailed parts dark and the detailed parts white - I hope that will work!
Tomorrow I'll go over the armor and do the shell damages. The only thing I am not certain about is the frontal armor provided by the spare tracks.
I don't know how those look when they are hit. They are pretty massive and I simply cannot imagine them looking the same way as a normal armor plate when hit.
I've got to dig deeper into it.
Who's Online 23 Members, 2 Anonymous, 33 Guests (See full list)