Jump to content

ladystorm

Reaper Bones 5 : Enthusiasm and Commentary Thread

Recommended Posts

1 minute ago, Bane Of Humanity said:

Thats the ting...I need LOTS of bodies....I cant justify that kind of purchase.

The web-husks aren't really available elsewhere, so they're the only thing that I could see Reaper potentially making separately. But if I were to place bets on it, I would guess Inarah is correct about this.

  • Like 4

Share this post


Link to post
Share on other sites

I'm currently in for $300. That's as much as I pledged in Bones 4 during the campaign. My final total was a little under $600 after adding in the PM. I'm not sure I can go much higher right now (and the Missus might not be happy with me where I'm at already). There's a remarkable amount of really cool stuff in this set despite me having already backed so many other Bones KSs.

  • Like 2
  • Sad 1

Share this post


Link to post
Share on other sites

Just clarification for those who don't realize from the picture, the "statue" with the first little arch of wall behind it, should be a separate piece from the stairs & alcove. They showed the statue piece on Reaper Live or some iteration of the Twitch stream last week. 

Edited by ksbsnowowl
  • Like 4
  • Thanks 1

Share this post


Link to post
Share on other sites
2 minutes ago, Sanael said:

The web-husks aren't really available elsewhere, so they're the only thing that I could see Reaper potentially making separately. But if I were to place bets on it, I would guess Inarah is correct about this.

Oh I think he is too.....

I just dont want it...

  • Like 2

Share this post


Link to post
Share on other sites

I'm pumped for the spider and halfling expansion.

 

To my knowledge, the only large-sized spider that Reaper has in Bones is the Giant Spider by Gene Van Horne, and that large-sized spider is a little on the small side.

 

The Vermin: Spiders by Kevin Williams are medium-sized and the Cave Spider by Kevin Williams is huge-sized.

 

Two updated large-sized spiders fill a need.

 

Plus, MOAR HALFLINGS.

 

I, too, hope that the set will be broken up down the road, though, so I can collect multiple spiders without having to buy multiple terrain pieces.

Edited by criticalhit
  • Like 5

Share this post


Link to post
Share on other sites
10 minutes ago, Bane Of Humanity said:

Thats the ting...I need LOTS of bodies....I cant justify that kind of purchase.

 

same. It's just not a feasible choice 

  • Like 2

Share this post


Link to post
Share on other sites
1 minute ago, cosxcam said:

I was hoping to keep my pledge under $200, but it's looking closer to $250. :unsure:

 

Yeah, I'm finding my pledge gradually creeping up.  I'm waiting for the Greek expansion to fully fund then I'll probably be adding that too.  

  • Like 2

Share this post


Link to post
Share on other sites
8 minutes ago, Rignes said:

 

Yeah, I'm finding my pledge gradually creeping up.  I'm waiting for the Greek expansion to fully fund then I'll probably be adding that too.  

 

Same :d

 

Right now my pledge is 200$, right now my idea is to just pledge for: 

 

- Core 

- Greek Expansion 

- Storm Giant/s 

- Every one of the 5 chromatic dragons 

- Probably a couple monsters/creatures like the dragonmen or the goroloth. 

 

That gives me an expected contribution of about 300$ tops. We'll see if I can keep it at that. But assuming there will be a BIG creature just like Argent, Ma'al or just a big scenario piece that will finally convince me... 

Edited by NyarlaBcn
  • Like 3

Share this post


Link to post
Share on other sites
6 minutes ago, Rignes said:

 

Yeah, I'm finding my pledge gradually creeping up.  I'm waiting for the Greek expansion to fully fund then I'll probably be adding that too.  

 

Greek is unlikely for me unless there's something really cool. My Mythic Battles Pantheon 1.5 kickstarter has me covered for most of what could be in there. Likely in for the underwater expansion, core set, and both encounters so far.

  • Like 1

Share this post


Link to post
Share on other sites
13 minutes ago, criticalhit said:

I'm pumped for the spider and halfling expansion.

 

To my knowledge, the only large-sized spider that Reaper has in Bones is the Giant Spider by Gene Van Horne, and that large-sized spider is a little on the small side.

 

The Vermin: Spiders by Kevin Williams are medium-sized and the Cave Spider by Kevin Williams is huge-sized.

 

Two updated large-sized spiders fill a need.

 

Plus, MOAR HALFLINGS.

 

I, too, hope that the set will be broken up down the road, though, so I can collect multiple spiders without having to buy multiple terrain pieces.

Well, there’s cadirith from bones 1. She fills up my palm. 
 

Or is that too big?

 

7F5AE878-2D64-45A9-AFB4-0CEE354B048D.jpeg.42de360587da9cc6f63d053459e4e619.jpeg

  • Like 3
  • Thanks 1
  • Haha 1
  • Confused 2

Share this post


Link to post
Share on other sites
1 minute ago, redambrosia said:

Well, there’s cadirith from bones 1. She fills up my palm. 
 

Or is that too big?

 

7F5AE878-2D64-45A9-AFB4-0CEE354B048D.jpeg.42de360587da9cc6f63d053459e4e619.jpeg

A spider that fills up my palm is a spider that's way too big...

  • Like 1
  • Thanks 2
  • Haha 9

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      https://www.kickstarter.com/projects/firstlegion/stunning-75mm-resin-fantasy-miniatures?ref=discovery_category_newest
       
      About
      First Legion 75mm Fantasy "Femmes Fatales" Resin Figure Kits
      A new series of provocative 75mm Fantasy Resin Figure Kits, each one beautifully sculpted and cast and a joy to paint.   
      Who We Are
      First Legion has long been a leading producer of 60mm scale superbly hand painted historical metal and resin figures as well as metal and resin figures kits in various scales. We most recently expanded into 28mm Fantasy miniatures with a huge launch of amazing sculpts that will be coming to retail early next year.   Please visit our websites and social media for more information.
      First Legion Historical
      First Legion Fantasy
      First Legion Facebook
      First Legion Instagram  
      The theme of the series is "Femmes Fatales", beautiful but dangerous women characters. Whether by force,  guile, or seduction these ladies are not to be fussed with.    There are 7 figures in total, each one more beautiful than the next and ranging in style from Gothic, to far eastern, nomadic, northern, and even an Aztec.   The commonality to them is that they are all stunning models of beautiful, dangerous women.  
      Those of you who followed our 28mm Fantasy Minis Kickstarter will recognize these figures from the "Femmes Fatales" Core Set.   They were originally sculpted in 75mm scale and reduced in scale to 28mm to be included in that KS as part of our 28mm fantasy series.  We present them here as originally conceived.    
      Unlike our 28mm KS, which had 170+ models, this KS is purposely very simple and very succinct.    Stunning models at great prices with rewards shipping in just 3 months!    
      Pledge Levels
      The first 5 Figures listed below are tied to pledge levels with selections to be made in our pledge manager following funding.   The higher the pledge level, but better deal it is on each figure.  
      Early Bird Pledge Levels are open for the first 27 hours.
      Add-On Sets
      The last two are available as an add-ons only, or as part of the "Drop Dead Gorgeous" Pledge Level.  Finally, there are three more that will be optional add-ons tied to stretch goals. 
      Resin Figure Kits
      All miniatures are produced in high quality resin and provided unpainted and unassembled.
      Mature Audience
      The figures below contain some nudity and are not suitable for audiences under 18.
      If you are offended by such figures, please stop reading and just move on.   They are purposely designed to be risqué, sexy, dangerous, and above all beautiful.    
       
       
       
       
    • By Darsc Zacal
      I’m interested in what people here think of this.
      It seems like a great idea, but I’m wondering if there might be some unforeseen drawbacks.
       
      https://www.kickstarter.com/projects/atlasmundi/immersive-battle-maps-for-tabletop-roleplaying-gam/description
      -
       
       





    • By WhiteWulfe
      EDIT: It's live! https://www.kickstarter.com/projects/oathsworn/oathsworn-burrows-and-badgers-anthro-miniatures-mouse-dog-cat
       

      We love miniatures. We love tabletop games. We love anthropomorphic animals, from Disney's Robin Hood through The Wind in the Willows to Brian Jaques' Redwall books. So we combined the things we love in our Burrows & Badgers tabletop skirmish game and the accompanying range of miniatures. And our Kickstarter backers have already helped us to grow the range to over 100 miniatures - but now it's time to add some more!

      Some miniatures from previous projects...
       
      Why are we making more miniatures?
      Because we want more characters for our Burrows & Badgers games – my Freebeast warband needs reinforcements, for a start! 
      And we know a lot of other people are looking for more anthropomorphic animal miniatures too. A lot of people are playing Burrows & Badgers now, and many of them have asked for Massive Hounds and a Massive Raptor, so we've sculpted them! Some will want to use them for other tabletop or roleplaying games, while others love painting miniatures, and our figures are perfect for that, full of character ready to be brought to life with your paintbrush....
      And some people just love collecting miniatures; again, we've made this new set of Burrows & Badgers figures perfect for collectors. They are all single piece models, with integral bases, so there are no fiddly parts to be glued on.
      We love making miniatures; we hope you'll love our miniatures too.
       
      Why we need your help...
      We've got 17 new miniatures sculpted, but they need to have moulds made before we can start producing the miniatures. And that's why we need funding; to get the production moulds made, and get the casting process started.
       
      About the miniatures...
      There are other ranges of anthropomorphic animal miniatures out there, but ours are a little different. We didn't want all the races of animals to be the same size. Instead, we've scaled them to each other; so a shrew or a mouse is a very small model, about 20mm tall, and a really big animal like a badger will stand about 50mm tall, for example.
      Each sculpted figure shown below has a scale picture with it, showing its height in millimetres. All our models are supplied unpainted.

       
      The Pledges
      We’re keeping it as simple as possible; there’s an ‘All-in’ pledge, which gets you all the new miniatures in this Kickstarter, and any bonus bits that may come along… there’s also a ‘Pick’n’Mix’ Pledge, if you just want to get a few of the new miniatures. For the Pick'n'Mix, just total up the prices of all the miniatures you want, and pledge for that amount. There's a minimum pledge of £10. There's only six of the sculpts shown so far, but expect more to be added regularly... I'll probably add two or three a day!
       

      ^Minimum of £10

      Pledge Level: The Great £40
       

      Pledge Level: The Small £64

      Pledge Level: All In £99
       
       
      Original post:
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/968660672/fishing-village?ref=discovery_category_newest
       
      About
      -Hi everyone, this time I propose you a Fishing Village:
      5 Houses   7 Footbridges  1 Bridge -A few years ago I did something similar for video games 
      here you can see the video: and I've thought of creating models suitable for 3D printing.
      -The models are in scale for 28 mm miniatures and are divided into components to be assembled without glue only joints.
      -Doors, windows, nets and winches are printed separately.
      -Each house is playable inside, with working doors and on the ground floor there is a fireplace with the pipeline out.
      -The prints you see below have been made with an Ender 3, layer 0.2 mm, infill 5%, Pla Geetech white, the models have been designed to have as few supports as possible, I printed them with an overhang of 80 ° -85 °, support Z distance 0,3 mm.
      -I highly recommend the use of printers with a print bed of at least 20x20x20 cm (for this scale).
      -Paint with cans and acrylic colors.
      -Each house needs about 500-800 grams of filament.
      -I put hooks scattered on the houses to attach cordage or oil lamps 
      -I remind you that only digital models will be sent to you, NOT PHISICAL ONES.
      * Good fishing ... *
      By removing the base you can have houses for a land village.
       
    • By Darsc Zacal
      Now Live, a kickstarter for a  Set of 10 Female Amazons(Queen, Mage, Shaman, Ranger, Bowwomen, Slinger, 4 Warriors)
       
      https://www.kickstarter.com/projects/tombguardians/28-mm-fantasy-female-amazons
       
      Tomb Guardians use many of the same sculptors as Reaper so some of the sculpting styles might seem familiar.
       
      Pictured below is a render of the mage.
       
       


  • Who's Online   8 Members, 2 Anonymous, 262 Guests (See full list)

×