Jump to content

ladystorm

Reaper Bones 5 : Enthusiasm and Commentary Thread

Recommended Posts

13 minutes ago, criticalhit said:

I hope that the next expansion to the Core Set gives us gribbly monsters like a Nothic or Stirges.

 

I know that they aren't as "Ooh! Ah!" exciting as dragons and giants, but they are core monsters in introductory adventures of D&D 5e, and neither are available in Bones.

Nothic and Stirges would be AWESOME!

 

 

 

 

 

 

Number Based on 1400-1500 Reaper time today:
Current Total Pledges: $1,738,871
Current Total Backers: 13,689
Next Goal At $1,750,000
To go to Next Goal $11,129
Hours to next goal based on gains this hour: 4.8
Hours to next goal based on 24h Avg: 3.7
   
Gain in last Hour: $2,302
New Backers This Hour: 10
Total Gain Today: $25,826
Total Gain 24 Hours: $74,649
Average Hourly Pledges Today: $1,722
Average Hourly Pledges 24 Hours: $2,993
Current Average Pledge: $127.03
Average Hourly Backers Today: 7.8
Average Hourly Backers 24 Hours: 11.3
Previous Hour Total Pledges: $1,736,569
Previous Hour Total Backers: 13,679
  • Like 5
  • Thanks 2

Share this post


Link to post
Share on other sites
3 minutes ago, lowlylowlycook said:

I'm pretty sure that someone converted a couple bones minis into on of those.

I have seen pics of a Tiik Warrior that was converted into one, and it's awesome, but I'm not a hobbyist. I don't even paint my miniatures. I just want something that I can pull out of the package and plunk onto the table.

  • Like 4

Share this post


Link to post
Share on other sites

I don't think Reaper is scouring this thread for suggestions, but if we're getting a new undersea expansion, I would love to get a couple more Tiik warrior sculpts.

 

I'd love to be able to put 3-4 distinct looking versions on the table.

 

Sadly, I'm guessing they have Julie focused on less repetitive options :down:

Edited by klarg1
  • Like 5

Share this post


Link to post
Share on other sites

I would love more Tiik/Slithe/Sahuagin too!

 

Ghosts of Saltmarsh introduced a plethora of new subtypes of Sahuagin, and using one Tiik miniature to represent them is next to impossible. 

  • Like 2
  • Haha 1

Share this post


Link to post
Share on other sites
42 minutes ago, criticalhit said:

I hope that the next expansion to the Core Set gives us gribbly monsters like a Nothic or Stirges.

 

stirges are a model that's needed really badly. Almost every module I've ran calls for them in one way or another at low level and I've yet to find a good affordable option.

  • Like 1
  • Thanks 2

Share this post


Link to post
Share on other sites
6 minutes ago, Picheth said:

Any chance to see new pathfinder goblins? Or they lost the license to Wizkids?

As far as I know, they are both licenced. With Goblins now  playable race, I would like to see some PC Pathfinder goblins

  • Like 2

Share this post


Link to post
Share on other sites

I wish Reaper could get the license for Starfinder. WK mins are few and pricey.

  • Like 4

Share this post


Link to post
Share on other sites
4 hours ago, Inarah said:

 

Also,  will there be any Pathfinder this time around? 

 

I'm really hoping that there are, and they include the Pathfinder Queen's Physician (Plague Doctor) sculpt that Reaper has already done in metal. It is a different aesthetic, but would be a nice pairing w/ the Dungeon Dwellers plague doctors. 

 

3 hours ago, kristof65 said:

Are there any good close up photos of the stained glass golem out there?  I'm thinking about having my wife do one in real stained glass.

 

One of the Twitch streams last week showed a 3D print of it. The print was opaque, not the transparent that the Stained Glass Golem will end up being. 

 

I'm stoked for it. There are 3e stats for them in MMII, but I've never found a good & affordable representation of one (just one rare Dreamblade that is too expensive).

  • Like 1

Share this post


Link to post
Share on other sites
7 minutes ago, ksbsnowowl said:

 

I'm really hoping that there are, and they include the Pathfinder Queen's Physician (Plague Doctor) sculpt that Reaper has already done in metal. It is a different aesthetic, but would be a nice pairing w/ the Dungeon Dwellers plague doctors. 

I'd like a copy of Alric of Halvon. He'd be a great noble miniature, but probably not the sort of thing I'd want in pewter.

Likewise, Queen Ileosa would be nice to have in Bones, too.

  • Like 4

Share this post


Link to post
Share on other sites

Number Based on 1500-1600 Reaper time today:
Current Total Pledges: $1,741,087
Current Total Backers: 13,704
Next Goal At $1,750,000
To go to Next Goal $8,913
Hours to next goal based on gains this hour: 4.0
Hours to next goal based on 24h Avg: 3.0
   
Gain in last Hour: $2,216
New Backers This Hour: 15
Total Gain Today: $28,042
Total Gain 24 Hours: $74,044
Average Hourly Pledges Today: $1,753
Average Hourly Pledges 24 Hours: $2,928
Current Average Pledge: $127.05
Average Hourly Backers Today: 8.3
Average Hourly Backers 24 Hours: 11.0
Previous Hour Total Pledges: $1,738,871
Previous Hour Total Backers: 13,689
  • Like 2
  • Thanks 3

Share this post


Link to post
Share on other sites
1 hour ago, lowlylowlycook said:

I'm pretty sure that someone converted a couple bones minis into on of those.

I did! But I would for sure paint more if Reaper made some! They are so creepy!

036.jpg.c7582558e5e67a0d37ce736bb0aa18ce.jpg

Edited by Pochi
  • Like 18

Share this post


Link to post
Share on other sites
3 minutes ago, Pochi said:

I did! But I would for sure paint more if Reaper made some! They are so creepy!

036.jpg.c7582558e5e67a0d37ce736bb0aa18ce.jpg

 

Great example of an underrepresented monster, there are literally dozens of us that want minis for them.

  • Like 4

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By talion78
      https://www.kickstarter.com/projects/leagueofinfamy/league-of-infamy
       
      From the team behind hit games Hellboy: The Board Game and Dungeon Saga: The Dwarf’s Kings Quest, League of Infamy is an occasionally co-operative dungeon crawler for up to 5 players, where it pays to commit dastardly deeds and partake in foul thievery – often against your own party.
      Join a rogue’s gallery of misfits, ne’er-do-wells and miscreants on a disgraceful mission to kidnap cute little baby Drakons, steal their eggs and viciously wipe out any irritating, goody-goody Elves that try to stop your nefarious schemes.
      But it’s not just the Elves you’ll need to keep a wary eye on. Your fellow (mis)adventurers are just as likely to betray you and steal your loot, shove you into harm’s way or just leave you in a dungeon full of unbeatable foes. As they like to say in the League of Infamy – ‘keep your enemies close but keep your friends at knifepoint’. 
       
      In the limited edition No Half Measures expansion, you must investigate reports of an ancient form of long-forgotten magic: gastromancy! Deal with halflings as strong as an ogre or tricky traps with toxic poisons. It's not all bad though, because you might come across a tasty pie or two to loot!
      In the Kickstarter Exclusive Siren's Wrath expansion, the League is furious that the Trident Realm is messing with one of its most important trade routes... which absolutely won't do! You're sent in to raid the Trident Realm keep and gather as many goods as you can. However, this will be your hardest mission yet, as the Keep Master takes advantage of the aquatic landscape to boost their Defenders.
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/firstlegion/stunning-75mm-resin-fantasy-miniatures?ref=discovery_category_newest
       
      About
      First Legion 75mm Fantasy "Femmes Fatales" Resin Figure Kits
      A new series of provocative 75mm Fantasy Resin Figure Kits, each one beautifully sculpted and cast and a joy to paint.   
      Who We Are
      First Legion has long been a leading producer of 60mm scale superbly hand painted historical metal and resin figures as well as metal and resin figures kits in various scales. We most recently expanded into 28mm Fantasy miniatures with a huge launch of amazing sculpts that will be coming to retail early next year.   Please visit our websites and social media for more information.
      First Legion Historical
      First Legion Fantasy
      First Legion Facebook
      First Legion Instagram  
      The theme of the series is "Femmes Fatales", beautiful but dangerous women characters. Whether by force,  guile, or seduction these ladies are not to be fussed with.    There are 7 figures in total, each one more beautiful than the next and ranging in style from Gothic, to far eastern, nomadic, northern, and even an Aztec.   The commonality to them is that they are all stunning models of beautiful, dangerous women.  
      Those of you who followed our 28mm Fantasy Minis Kickstarter will recognize these figures from the "Femmes Fatales" Core Set.   They were originally sculpted in 75mm scale and reduced in scale to 28mm to be included in that KS as part of our 28mm fantasy series.  We present them here as originally conceived.    
      Unlike our 28mm KS, which had 170+ models, this KS is purposely very simple and very succinct.    Stunning models at great prices with rewards shipping in just 3 months!    
      Pledge Levels
      The first 5 Figures listed below are tied to pledge levels with selections to be made in our pledge manager following funding.   The higher the pledge level, but better deal it is on each figure.  
      Early Bird Pledge Levels are open for the first 27 hours.
      Add-On Sets
      The last two are available as an add-ons only, or as part of the "Drop Dead Gorgeous" Pledge Level.  Finally, there are three more that will be optional add-ons tied to stretch goals. 
      Resin Figure Kits
      All miniatures are produced in high quality resin and provided unpainted and unassembled.
      Mature Audience
      The figures below contain some nudity and are not suitable for audiences under 18.
      If you are offended by such figures, please stop reading and just move on.   They are purposely designed to be risqué, sexy, dangerous, and above all beautiful.    
       
       
       
       
    • By Darsc Zacal
      I’m interested in what people here think of this.
      It seems like a great idea, but I’m wondering if there might be some unforeseen drawbacks.
       
      https://www.kickstarter.com/projects/atlasmundi/immersive-battle-maps-for-tabletop-roleplaying-gam/description
      -
       
       





    • By WhiteWulfe
      EDIT: It's live! https://www.kickstarter.com/projects/oathsworn/oathsworn-burrows-and-badgers-anthro-miniatures-mouse-dog-cat
       

      We love miniatures. We love tabletop games. We love anthropomorphic animals, from Disney's Robin Hood through The Wind in the Willows to Brian Jaques' Redwall books. So we combined the things we love in our Burrows & Badgers tabletop skirmish game and the accompanying range of miniatures. And our Kickstarter backers have already helped us to grow the range to over 100 miniatures - but now it's time to add some more!

      Some miniatures from previous projects...
       
      Why are we making more miniatures?
      Because we want more characters for our Burrows & Badgers games – my Freebeast warband needs reinforcements, for a start! 
      And we know a lot of other people are looking for more anthropomorphic animal miniatures too. A lot of people are playing Burrows & Badgers now, and many of them have asked for Massive Hounds and a Massive Raptor, so we've sculpted them! Some will want to use them for other tabletop or roleplaying games, while others love painting miniatures, and our figures are perfect for that, full of character ready to be brought to life with your paintbrush....
      And some people just love collecting miniatures; again, we've made this new set of Burrows & Badgers figures perfect for collectors. They are all single piece models, with integral bases, so there are no fiddly parts to be glued on.
      We love making miniatures; we hope you'll love our miniatures too.
       
      Why we need your help...
      We've got 17 new miniatures sculpted, but they need to have moulds made before we can start producing the miniatures. And that's why we need funding; to get the production moulds made, and get the casting process started.
       
      About the miniatures...
      There are other ranges of anthropomorphic animal miniatures out there, but ours are a little different. We didn't want all the races of animals to be the same size. Instead, we've scaled them to each other; so a shrew or a mouse is a very small model, about 20mm tall, and a really big animal like a badger will stand about 50mm tall, for example.
      Each sculpted figure shown below has a scale picture with it, showing its height in millimetres. All our models are supplied unpainted.

       
      The Pledges
      We’re keeping it as simple as possible; there’s an ‘All-in’ pledge, which gets you all the new miniatures in this Kickstarter, and any bonus bits that may come along… there’s also a ‘Pick’n’Mix’ Pledge, if you just want to get a few of the new miniatures. For the Pick'n'Mix, just total up the prices of all the miniatures you want, and pledge for that amount. There's a minimum pledge of £10. There's only six of the sculpts shown so far, but expect more to be added regularly... I'll probably add two or three a day!
       

      ^Minimum of £10

      Pledge Level: The Great £40
       

      Pledge Level: The Small £64

      Pledge Level: All In £99
       
       
      Original post:
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/968660672/fishing-village?ref=discovery_category_newest
       
      About
      -Hi everyone, this time I propose you a Fishing Village:
      5 Houses   7 Footbridges  1 Bridge -A few years ago I did something similar for video games 
      here you can see the video: and I've thought of creating models suitable for 3D printing.
      -The models are in scale for 28 mm miniatures and are divided into components to be assembled without glue only joints.
      -Doors, windows, nets and winches are printed separately.
      -Each house is playable inside, with working doors and on the ground floor there is a fireplace with the pipeline out.
      -The prints you see below have been made with an Ender 3, layer 0.2 mm, infill 5%, Pla Geetech white, the models have been designed to have as few supports as possible, I printed them with an overhang of 80 ° -85 °, support Z distance 0,3 mm.
      -I highly recommend the use of printers with a print bed of at least 20x20x20 cm (for this scale).
      -Paint with cans and acrylic colors.
      -Each house needs about 500-800 grams of filament.
      -I put hooks scattered on the houses to attach cordage or oil lamps 
      -I remind you that only digital models will be sent to you, NOT PHISICAL ONES.
      * Good fishing ... *
      By removing the base you can have houses for a land village.
       
  • Who's Online   41 Members, 1 Anonymous, 276 Guests (See full list)

×