Jump to content

ladystorm

Reaper Bones 5 : Enthusiasm and Commentary Thread

Recommended Posts

I have to admit, of the figs so far, this is what has me most tempted:

1c118a271e4cd3c0142a36c956c6b201_origina

Shamefully, I must admit that's mostly because of the obvious bad puns, like:

In Soviet garden, salad eats you!

  • Haha 15

Share this post


Link to post
Share on other sites
2 minutes ago, Arkady said:

I have to admit, of the figs so far, this is what has me most tempted:

1c118a271e4cd3c0142a36c956c6b201_origina

Shamefully, I must admit that's mostly because of the obvious bad puns, like:

In Soviet garden, salad eats you!

 

Maybe I'm not getting the hidden meaning (well, yah I don't) but I have no idea why this figure came up in the KS. It's a funny figure & I'll  gladly give it a home, but overall I'm like eh, ok then.

  • Like 1

Share this post


Link to post
Share on other sites

Somebody asked when is the normal, usual Reaper Live on a Thursday?

 

Normally it is 6pm. But this Twitch channel is showing a static graphic that says they will fire it up at 4:30PM CST. That's ~35** minutes or so from now.

 

Best guess Dave and Jon starting off;  Ed and Ron taking over at 6.

 

(The clearly labeled speculation ^ of a Griffon. Not official Info.)

Edited by TGP
**there is a countdown timer on the channel with a different opinion
  • Like 4
  • Thanks 1

Share this post


Link to post
Share on other sites
20 minutes ago, cosxcam said:
24 minutes ago, haldir said:

 

Tailspinner took a pic of me in my flying squirrel onesie at a previous RCon. :lol:

 

I haven't said it, but I'm very grateful they are putting that one in the kickstarter. Even if it was add-on (which it's not), it still beats "treasure-hunting" for it via Pizza Dice.

 

 

Was that a thing in the past? This is the first KS for Reaper I've backed and kept up on.

 

 

 

@cosxcam, see this link.   As has been said,  a metal pizza dragon is going to be included in one out of x containers.

 

 https://www.reapermini.com/dice

  • Thanks 1

Share this post


Link to post
Share on other sites
13 minutes ago, haldir said:

 

Maybe I'm not getting the hidden meaning (well, yah I don't) but I have no idea why this figure came up in the KS. It's a funny figure & I'll  gladly give it a home, but overall I'm like eh, ok then.

The Dire Cabbage was some joke that started in the Twitch stream.  I caught mention of it during Reaper Live a few weeks back, but it sounded like it had been going on a while.

 

I actually don't mind it; I'll use it as a mimic.  Though I just noticed the dino-tail they put on it... that's kind of odd.

  • Like 4

Share this post


Link to post
Share on other sites
27 minutes ago, haldir said:

 

I haven't said it, but I'm very grateful they are putting that one in the kickstarter. Even if it was add-on (which it's not), it still beats "treasure-hunting" for it via Pizza Dice.

Me too.!

 

Of course that’s assuming I’ll be getting a core set, which isn’t a guaranteed thing at this point.

  • Like 3

Share this post


Link to post
Share on other sites
2 minutes ago, ksbsnowowl said:

The Dire Cabbage was some joke that started in the Twitch stream.  I caught mention of it during Reaper Live a few weeks back, but it sounded like it had been going on a while.

 

I actually don't mind it; I'll use it as a mimic.  Though I just noticed the dino-tail they put on it... that's kind of odd.

 

Thanks for the clear up. Yah I don't watch Reaper live so whatever goes on there, I only get in reports here.

1 minute ago, Darsc Zacal said:

Me too.!

 

Of course that’s assuming I’ll be getting a core set, which isn’t a guaranteed thing at this point.

 

Hopefully it's a Core set single piece for people that just want to piecemail the core set.

  • Like 1

Share this post


Link to post
Share on other sites
4 hours ago, Chris Palmer said:

 

 

DINO-PIRATES need their own Saturday morning cartoon, with theme song and licensed toy line! :lol:

 

 

And the theme song will have the tag line, "Bring them on!"

 

“Land of the Found”, in which modern or sci-fi Dino scientists and explorers must contend with giant, primitive humanoids lumbering around, and chasing our heroes.

 

i nominate Reaper hill giants for the job.

  • Like 2
  • Haha 1

Share this post


Link to post
Share on other sites
19 minutes ago, Arkady said:

At least it's not a gazebo...

 

I could go for that one. :lol:

  • Like 2

Share this post


Link to post
Share on other sites

Could they be purposely holding back the Goroloth image to reveal on Reaper Live tonight?   

 

 

Share this post


Link to post
Share on other sites
28 minutes ago, Arkady said:

At least it's not a gazebo...

I wouldnt mind one but it would have to be much bigger than the puny one they made in bones 4

  • Thanks 1

Share this post


Link to post
Share on other sites
3 minutes ago, Chris Palmer said:

Could they be purposely holding back the Goroloth image to reveal on Reaper Live tonight?   

 

 

That would be annoying.

 

I would totally get a dire wallet if it could earn back some of my money.

  • Like 4
  • Haha 3

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      https://www.kickstarter.com/projects/firstlegion/stunning-75mm-resin-fantasy-miniatures?ref=discovery_category_newest
       
      About
      First Legion 75mm Fantasy "Femmes Fatales" Resin Figure Kits
      A new series of provocative 75mm Fantasy Resin Figure Kits, each one beautifully sculpted and cast and a joy to paint.   
      Who We Are
      First Legion has long been a leading producer of 60mm scale superbly hand painted historical metal and resin figures as well as metal and resin figures kits in various scales. We most recently expanded into 28mm Fantasy miniatures with a huge launch of amazing sculpts that will be coming to retail early next year.   Please visit our websites and social media for more information.
      First Legion Historical
      First Legion Fantasy
      First Legion Facebook
      First Legion Instagram  
      The theme of the series is "Femmes Fatales", beautiful but dangerous women characters. Whether by force,  guile, or seduction these ladies are not to be fussed with.    There are 7 figures in total, each one more beautiful than the next and ranging in style from Gothic, to far eastern, nomadic, northern, and even an Aztec.   The commonality to them is that they are all stunning models of beautiful, dangerous women.  
      Those of you who followed our 28mm Fantasy Minis Kickstarter will recognize these figures from the "Femmes Fatales" Core Set.   They were originally sculpted in 75mm scale and reduced in scale to 28mm to be included in that KS as part of our 28mm fantasy series.  We present them here as originally conceived.    
      Unlike our 28mm KS, which had 170+ models, this KS is purposely very simple and very succinct.    Stunning models at great prices with rewards shipping in just 3 months!    
      Pledge Levels
      The first 5 Figures listed below are tied to pledge levels with selections to be made in our pledge manager following funding.   The higher the pledge level, but better deal it is on each figure.  
      Early Bird Pledge Levels are open for the first 27 hours.
      Add-On Sets
      The last two are available as an add-ons only, or as part of the "Drop Dead Gorgeous" Pledge Level.  Finally, there are three more that will be optional add-ons tied to stretch goals. 
      Resin Figure Kits
      All miniatures are produced in high quality resin and provided unpainted and unassembled.
      Mature Audience
      The figures below contain some nudity and are not suitable for audiences under 18.
      If you are offended by such figures, please stop reading and just move on.   They are purposely designed to be risqué, sexy, dangerous, and above all beautiful.    
       
       
       
       
    • By Darsc Zacal
      I’m interested in what people here think of this.
      It seems like a great idea, but I’m wondering if there might be some unforeseen drawbacks.
       
      https://www.kickstarter.com/projects/atlasmundi/immersive-battle-maps-for-tabletop-roleplaying-gam/description
      -
       
       





    • By WhiteWulfe
      EDIT: It's live! https://www.kickstarter.com/projects/oathsworn/oathsworn-burrows-and-badgers-anthro-miniatures-mouse-dog-cat
       

      We love miniatures. We love tabletop games. We love anthropomorphic animals, from Disney's Robin Hood through The Wind in the Willows to Brian Jaques' Redwall books. So we combined the things we love in our Burrows & Badgers tabletop skirmish game and the accompanying range of miniatures. And our Kickstarter backers have already helped us to grow the range to over 100 miniatures - but now it's time to add some more!

      Some miniatures from previous projects...
       
      Why are we making more miniatures?
      Because we want more characters for our Burrows & Badgers games – my Freebeast warband needs reinforcements, for a start! 
      And we know a lot of other people are looking for more anthropomorphic animal miniatures too. A lot of people are playing Burrows & Badgers now, and many of them have asked for Massive Hounds and a Massive Raptor, so we've sculpted them! Some will want to use them for other tabletop or roleplaying games, while others love painting miniatures, and our figures are perfect for that, full of character ready to be brought to life with your paintbrush....
      And some people just love collecting miniatures; again, we've made this new set of Burrows & Badgers figures perfect for collectors. They are all single piece models, with integral bases, so there are no fiddly parts to be glued on.
      We love making miniatures; we hope you'll love our miniatures too.
       
      Why we need your help...
      We've got 17 new miniatures sculpted, but they need to have moulds made before we can start producing the miniatures. And that's why we need funding; to get the production moulds made, and get the casting process started.
       
      About the miniatures...
      There are other ranges of anthropomorphic animal miniatures out there, but ours are a little different. We didn't want all the races of animals to be the same size. Instead, we've scaled them to each other; so a shrew or a mouse is a very small model, about 20mm tall, and a really big animal like a badger will stand about 50mm tall, for example.
      Each sculpted figure shown below has a scale picture with it, showing its height in millimetres. All our models are supplied unpainted.

       
      The Pledges
      We’re keeping it as simple as possible; there’s an ‘All-in’ pledge, which gets you all the new miniatures in this Kickstarter, and any bonus bits that may come along… there’s also a ‘Pick’n’Mix’ Pledge, if you just want to get a few of the new miniatures. For the Pick'n'Mix, just total up the prices of all the miniatures you want, and pledge for that amount. There's a minimum pledge of £10. There's only six of the sculpts shown so far, but expect more to be added regularly... I'll probably add two or three a day!
       

      ^Minimum of £10

      Pledge Level: The Great £40
       

      Pledge Level: The Small £64

      Pledge Level: All In £99
       
       
      Original post:
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/968660672/fishing-village?ref=discovery_category_newest
       
      About
      -Hi everyone, this time I propose you a Fishing Village:
      5 Houses   7 Footbridges  1 Bridge -A few years ago I did something similar for video games 
      here you can see the video: and I've thought of creating models suitable for 3D printing.
      -The models are in scale for 28 mm miniatures and are divided into components to be assembled without glue only joints.
      -Doors, windows, nets and winches are printed separately.
      -Each house is playable inside, with working doors and on the ground floor there is a fireplace with the pipeline out.
      -The prints you see below have been made with an Ender 3, layer 0.2 mm, infill 5%, Pla Geetech white, the models have been designed to have as few supports as possible, I printed them with an overhang of 80 ° -85 °, support Z distance 0,3 mm.
      -I highly recommend the use of printers with a print bed of at least 20x20x20 cm (for this scale).
      -Paint with cans and acrylic colors.
      -Each house needs about 500-800 grams of filament.
      -I put hooks scattered on the houses to attach cordage or oil lamps 
      -I remind you that only digital models will be sent to you, NOT PHISICAL ONES.
      * Good fishing ... *
      By removing the base you can have houses for a land village.
       
    • By Darsc Zacal
      Now Live, a kickstarter for a  Set of 10 Female Amazons(Queen, Mage, Shaman, Ranger, Bowwomen, Slinger, 4 Warriors)
       
      https://www.kickstarter.com/projects/tombguardians/28-mm-fantasy-female-amazons
       
      Tomb Guardians use many of the same sculptors as Reaper so some of the sculpting styles might seem familiar.
       
      Pictured below is a render of the mage.
       
       


  • Who's Online   38 Members, 1 Anonymous, 311 Guests (See full list)

×