Jump to content
ladystorm

Reaper Bones 5 : Enthusiasm and Commentary Thread

Recommended Posts

Since essentially all of their terrain has been cross-compatible I wonder if this gate will fit with or near DDS2 and/or various other ruins.

 

Also, this is THE OPPORTUNITY to begin selling the terrain pieces out of Dragons Don't Share 2 on their own. Ruined Tower sold right next to Undead Gate and Evil Altar and...

 

I would buy menhirs by the dozen, guys. 

  • Like 10

Share this post


Link to post
Share on other sites
2 hours ago, Pineapple said:

Let me explain what I mean.

 

As a stand alone piece, they sort of had to add semi-ruined walls on the flanks to add some visual interest. On the other hand, those same spots make it difficult to integrate into another set of walls. What good is an armored gate if your walls are already falling down? As part of a larger castle it would've been better modeled with edges that can stand flush against other walls.

 

I think it's a cool piece, I just think it's hard for it to serve both aims well. At $18 it's an easy pass for me even though I think it's nicely sculpted.

Grump's idea is to use it with 2D maps.

 

Doors, chests, and interesting things in 3D and miniatures.

 

That gate is definitely an interesting thing. ::):

 

I can see his idea, the party having a fight to even get into the dungeon.

 

I'm getting an Elder Scrolls vibe looking at it, me.

 

I'm also starting to realize I want a Skyrim flavor for my Norse game.

 

  • Like 14

Share this post


Link to post
Share on other sites
3 minutes ago, PaganMegan said:

Grump's idea is to use it with 2D maps.

 

Doors, chests, and interesting things in 3D and miniatures.

 

That gate is definitely an interesting thing. ::):

 

I can see his idea, the party having a fight to even get into the dungeon.

 

I'm getting an Elder Scrolls vibe looking at it, me.

 

I'm also starting to realize I want a Skyrim flavor for my Norse game.

 

 

So you're getting those Rune Wights, right?

  • Like 7
  • Haha 1

Share this post


Link to post
Share on other sites

All of that makes sense. The hobby budget is, unfortunately, not unlimited and the gate doesn't make the cut for me even though it's a cool piece.

  • Like 5

Share this post


Link to post
Share on other sites
5 minutes ago, turbocooler said:

I need some figures now and can't wait 2yrs.

I would like to purchase MURKILLOR THE WRAITH KING (RESIN) 

 

Anyone know if that is a one piece or two piece figure?  I want to use my own base.

 They only released 150 on the website, and it was a Reapercon '19 Item. I think you may be out of luck on that one.

Edited by Skallabjorn
  • Like 3
  • Sad 1

Share this post


Link to post
Share on other sites
1 hour ago, Skallabjorn said:

 Cadrith is a demon spider. Demons don't die, they discorporate, return to their plane of origin for a variable amount of time and PLOT REVENGE!

Guess it just depends on whether its at her place or his...

  • Haha 5

Share this post


Link to post
Share on other sites
1 minute ago, Bane Of Humanity said:

Guess it just depends on whether its at her place or his...

Hers. Cadrith is obviously a bachelor, so his place is probably full of empty ale kegs, half-eaten dwarves, and a well past it's eat by date halfling.

  • Like 2
  • Thanks 1
  • Haha 9

Share this post


Link to post
Share on other sites
29 minutes ago, Skallabjorn said:
34 minutes ago, turbocooler said:

I need some figures now and can't wait 2yrs.

I would like to purchase MURKILLOR THE WRAITH KING (RESIN) 

 

Anyone know if that is a one piece or two piece figure?  I want to use my own base.

 They only released 150 on the website, and it was a Reapercon '19 Item. I think you may be out of luck on that one.

 

 

Anyone  else  remember Ron saying way back after Reapercon that Murkillor was going to appear in the Kickstarter as a Bones figure as well?  

Or do I need to go recheck the videos...

  • Like 7

Share this post


Link to post
Share on other sites

Number Based on 1500-1600 Reaper time today:
Current Total Pledges: $2,100,510
Current Total Backers: 15,276
Next Goal At $2,090,000
To go to Next Goal -$10,510
Hours to next goal based on gains this hour: -2.8
Hours to next goal based on 24h Avg: -7.8
   
Gain in last Hour: $3,786
New Backers This Hour: 12
Total Gain Today: $21,031
Total Gain 24 Hours: $32,162
Average Hourly Pledges Today: $1,237
Average Hourly Pledges 24 Hours: $1,340
Current Average Pledge: $137.50
Average Hourly Backers Today: 3.8
Average Hourly Backers 24 Hours: 4.5
Previous Hour Total Pledges: $2,096,724
Previous Hour Total Backers: 15,264
Backers to beat Bones 1 2,406
Days to hit Bones 1 based on 24 hour average 22.3
Backers to beat Bones 2 -313
Backers to beat Bones 3 -1811
Backers to beat Bones 4 922
Days to hit Bones 4 based on 24 hour average 8.5
  • Like 3
  • Thanks 3

Share this post


Link to post
Share on other sites

Just upped our pledge to include that undead gate, the Greek and Underwater expansions plus more, its gonna be expensive....

  • Like 10

Share this post


Link to post
Share on other sites

Number Based on 1600-1700 Reaper time today:
Current Total Pledges: $2,101,494
Current Total Backers: 15,283
Next Goal At $2,145,000
To go to Next Goal $43,506
Hours to next goal based on gains this hour: 44.2
Hours to next goal based on 24h Avg: 33.6
   
Gain in last Hour: $984
New Backers This Hour: 7
Total Gain Today: $22,015
Total Gain 24 Hours: $31,122
Average Hourly Pledges Today: $1,223
Average Hourly Pledges 24 Hours: $1,297
Current Average Pledge: $137.51
Average Hourly Backers Today: 3.9
Average Hourly Backers 24 Hours: 4.7
Previous Hour Total Pledges: $2,100,510
Previous Hour Total Backers: 15,276
Backers to beat Bones 1 2,399
Days to hit Bones 1 based on 24 hour average 21.4
Backers to beat Bones 2 -320
Backers to beat Bones 3 -1818
Backers to beat Bones 4 915
Days to hit Bones 4 based on 24 hour average 8.2
  • Like 6
  • Thanks 4

Share this post


Link to post
Share on other sites
21 minutes ago, PaganMegan said:

Damn straight!

 

Two sets, MINIMUM!

 

14 minutes ago, ksbsnowowl said:

I'm busy the rest of today, I'll get back to you tomorrow. 

I'm getting 2 sets of the Rune Wights, too. 


Stop TEMPTING me!

 

::P:

  • Like 6

Share this post


Link to post
Share on other sites
On 10/18/2019 at 2:10 PM, Pezler the Polychromatic said:

Did somebody say flumphs!?!?!?!?

No one said that... :rolleyes:

 

On 10/18/2019 at 2:23 PM, Corsair said:

No! No one said flumphs! There are no flumphs allowed in this thread! Keep those poly-colored, probably translucent moldd flumphs to another expansion!

Nothing to see here Pezler, nothing to see...move along...move along...

:blues:

 

 

  • Like 3
  • Haha 6

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      https://www.kickstarter.com/projects/unchartedrealms/uncharted-realms-of-the-abyss
       
      https://www.kickstarter.com/projects/unchartedrealms/uncharted-realms-of-the-abyss?ref=bth1nl&token=c30b4ec2&fbclid=IwAR0LO8qco1H0nXlfbWOscidIaGMXT3OdAE6zsXXSASPU372dnvhX3vm6J-0
       
      About

       

       
       
    • By Suden
      Archon Studio (LOAD, Vanguard of War, Chronicle X) are branching into modular terrain. The project is now Live:
      https://www.kickstarter.com/projects/1915792245/1614419087?ref=6j5c5t&token=15b18208
       
      Apparently it is "full plastic injection" so not the same as their minis. The concept seems interesting, but the preview page is far from finished, so it's hard to get a good grasp on prices (one "Starter Pledge" for $49 is all they currently have listed, along with a $20 add on). The whole magnetized modular wall system looks like it could have potential.
       

       
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/swordstoneminis/the-goblins-28mm-fantasy-miniatures?ref=discovery_category_newest
       
      About
      Digital render of the finished sculpts. In the last six or so years I have played a lot of tabletop games, ranging from Warhammer and Dungeons & Dragons to smaller games like Frostgrave and Relicblade. I have fallen in love with the hobby of painting miniatures and everything surrounding it. A year ago I made plans to give something back and to add something to this hobby community I love so dearly.
      My background in digital game art helped me a lot since I was already familiar with the software to sculpt digitally. So I started working on a few miniatures I would like to produce. Most of them were abandoned in favor of better ideas, but eventually I created this set of three goblins. These goblins are each embodiments of the archetypes found in many of the games I love: the wizard, the fighter and the thief/ranger. 
      I spent the last year figuring out how to cast resin to the standards I saw in the products I enjoy and how to make sure digitally sculpted details translated well to the tabletop scale.
      These three figures are the end result of that progress, but hopefully the start of a lot more.
      I made this Kickstarter to cover the costs of the materials used and shipping, but mostly so I can bring these little goblins to your tabletop :)
      All miniatures will be multiple parts cast in resin and supplied unpainted, with a 25mm gaming base.
      The final resin casts.
    • By ced1106
      The KS is starting off with bases, and SG's unlock the terrain:
      https://www.kickstarter.com/projects/1787010870/the-temple-of-chaos-quickstarter-resin-bases-and-terrain
       

    • By Scylla Models
      KICKSTARTER: Tales from the Catacombs
       

       
      They drag their feet one in front the other, deliberately, slowly. They  crawl out of their resting grounds. Out of the tombs to the fresh air,  slowly, unrestained. 
      Scylla Models is back presenting you a new range of Villains and Undead monsters for your collection. The models we present you are master casts  white metal (primed white for better result in the pictures), with the only exception of Zuula. She on her Night Terror is our first large monster and we decided to go resin. The results are quite impressive as you might see in the picture. If you want to know more about  us visit our website. 
       
      KICKSTARTER: Tales from the Catacombs
       
  • Who's Online   20 Members, 1 Anonymous, 30 Guests (See full list)

×
×
  • Create New...