Recently Browsing 0 members
No registered users viewing this page.
Only 3 hours left, but...
Hi Kickstarter, it’s PrintDry. In 2016, we did our first Kickstarter campaign and found that many people were interested in improving the quality of their 3D prints. 310 backers with CA$41,747 helped us bring our project to life. Since then the PrintDry products have found over 20,000 users in over 50 countries. We are really grateful to all our backers.
In the past 3 years, our research and development efforts haven't stopped and we always want to offer the best solution to the 3D printing community. After launching the filament storage container and a vacuum version . We have revisited the original dryer design and updated it into the PrintDry Filament Dryer 2.0.
As many of us know from experience, a lot can go wrong with 3D printing. One of the most important factors is moisture buildup in the filament, which is a simple but often hard to identify issue that continues to plague many printing jobs. If a quality print is desired, you can’t ignore it.
Now, we would like to introduce our new product called the PrintDry Filament Dryer 2.0 which has many new features, such as large spool compatibility, a built-in timer, a digital display, and a modular design. The PrintDry Filament Dryer 2.0 is the only dryer that can dry and feed large (2-5kg) filament spools with a 300mm (12”) outside diameter (OD) . It’s the ultimate filament dryer you need for quality 3D printing!
Play Easily adjust the temperature with 5 presets (35ºC, 45ºC, 55ºC, 65ºC, and 75ºC). Built-in timer with a maximum time of 48 hours. Vertical Mounting
Spool Adapter included
2 metal shafts 4 big spool adapters 4 small spool adapters Accessories
one dryer+ one vacuum container+ one pump One dryer includes: 2 metal shafts; 4 big spool adapters; 4 small spool adapters Reward Tiers
The PrintDry filament dryer 2.0 will be shipped worldwide! However, please be aware that for some countries VAT/duties may incur upon receipt of your unit. These fees are the responsibility of each international backer.
A friend with a 3D printer made this for me. I spent about an hour painting it, and it's now an NPC in my Eberron campaign.
Painting was odd because it's not a very clean print, there are lots of little fibers and print lines on it which obscure detail. I painted very quickly with a lot of wet in wet blending. I'm quite happy with the result given the amount of time it took and the nice-at-arm's-length blending.
My friend is continuing to work with the printer, so eventually he's going to print this up again at a higher quality.
The design is on Thingiverse if you like it.
The siblings of conflict are here!
Attack! this interstellar army of hardboiled girls are ready to conquer your tabletop! Assemble unique squads with powerful weapons, led by brave leaders. They're cute, they're rowdy, they are the siblings of conflict!
We're planning amazing, unique hero characters, and more! Surprises await! New Stretch Goals will appear as the campaign advances!
Chibis are adorable characters that have lately have made a splash in the boardgaming and miniature community with games such as Super Dungeon Explore, Arcadia Quest, Ninja All-Stars and many others. They're also featured in collectible figurines and in other geeky paraphernalia.
This is the NINTH Chibi KickStarter run by Impact! Miniatures and Impact! is partnering with Märchen to bring you some incredible, new Siblings of Conflict chibi miniatures along with sci-fi allies & enemies for them to combat!
The funding goal will pay for the sculpting & 3-D printing of the miniatures.
ALL miniatures in this KickStarter are provided unpainted. Unless otherwise stated after the name of the miniature, all miniatures offered with this KickStarter will be high quality 3-D prints done on a top end 25 to 50 micron printer (you should not see print lines after priming and paint). As stretch goals are reached we will unlock additional sculpts. The miniatures will require light clean up, being primed before painted and might need some assembly (although we will do our best to keep the figures with as few pieces as possible).
You can use your reward dollars to get any of the miniatures in the listing above.
While many of the miniatures in this KickStarter will be 3-D printed, the quality will be a very high level since they are 25 to 50 micron 3-D SLA prints which are very different than ABS prints. Below is an extreme close -up example of a printed figure and how it shows no print lines when primed and painted (with no other prep work). Many thanks to Yeji Kim for her painting of Vanguard Leader Anna (top row) and Jason Turner for the painting of Vanguard Leader Anna and Vanguard Trooper #3 (bottom row)!
Shipping will be charged in the pledge manager after the project. At this time we are estimating $5 for US backers, $13 for Canada and $17 for Rest of World. Shipping of the KickStarter will be EU Friendly and should not incur any customs fees.
Who's Online 28 Members, 2 Anonymous, 32 Guests (See full list)
- Bane Of Humanity
- Doug Sundseth
- Darsc Zacal
- Knight of the Dinner Table
- Dan d'Lyon