Recently Browsing 0 members
No registered users viewing this page.
Every so often, a model catches my attention. Sometimes because it is excellent and inspiring, sometimes because there is something off about it. Sometimes the model is both. Here is one such example:
Yeah, it is the angle of the buckler thats just wrong. It simply should not happen. It triggers my OCD.
This is the "Gnoll Warrior" from the "Thank You pack" add-on in the second Bones kickstarter. During the kickstarter it was presented as a line concept drawing and as is usually the case, the resulting miniature ends up slightly different. Still a perfectly good representation of the original concept art, but anyhow.
That said, I do understand that one-piece castability requires certain angles and alignments for the mould to work, and to get the detail in the shield to show it cannot be sideways in the mould. There have been plenty of examples of minis in strange poses and/or holding things at strange angles because of this.
This Gnoll is also stylistically rather different from the other Gnolls Reaper makes in Bones, perhaps it's just not so comic-like?
But I ramble.
The other day as I yet again was perusing the Drawers of Doom™, I picked this one for the painting table. But first it got to meet Mr. Scalpel for a field amputation followed by a quick rotation and graft:
One drop of superglue later the case of the misaligned buckler was solved.
Add a base and some paint:
Good thing classic Bones material is really easy to slice and reposition. Such an excellent material for convertions as well.
Jagged white parallells of sharp fangs emerged into the campfire light, then a staring yellow eye. Inquisitive, roughly probing clawed fingers followed. Snorting, foul breath enveloped me, causing me to gag.
It jerked its beast-like head back, loud barks of mocking laughter spraying spittle in my face as I tried to stand my ground.
"I smell fright, little man", the gnoll rasped out at last. "Why's that parlay-totem here?"
This mini was finished September 12th 2020.
77388 Gnoll Warrior
From the second Bones kickstarter 2013
Sculpted by Bobby Jackson
classic white Bones PVC
available from reapermini.com
It has been a while since I painted anything. A combination of my arms acting up again and my just not feeling it. Call it the recurring fallow season.
So I am getting back on track with some Orcs. These are partly from the first Bones kickstarter and partly from the third. All together a nice band of 10.
There are nine different orcs that are variants made on only two basic bodies, plus a singular warchief that I think fits in with the lot of them.
I originally based them on 40mm round bases with sloped edges, the thinner-than-citadel knockoff ones. But there was always something not quite right about them, the bases were simply too large for the minis. So off they came. I ended up with making 37mm 3D-printed ones instead. I think they fit well on these minis.
lots of pictures below
This is another mini in the Bones 4 Fan Favorites expansion that really should have been in the Lost Valley expansion. The Mammoth.
One of the tusks snapped in two because I have butterfingers and dropped the model to the floor at one point. This highlighted a crucial difference between the rigid and more brittle Bones Black material and the rubbery Classic Bones material that would not have snapped. (At least I have never had any classic Bones snap, and I have dropped quite a few of them, let me tell you. Also the large ones.)
Luckily the break was clean and the tusk glued on without much ado nor filling or even filing needed. It had not even warped out of shape. Can you tell which tusk broke off by looking at the pictures?
Mammoths dissappeared after the last Ice Age about 10.000 years ago, with a holdout herd on some remote island lasting up until about 4000 years ago. Exactly why they died out is cause for much speculation. I believe the answer is a rather down to earth; "them wuz good eatin' ". I hold no truck with the modern myth that says ancient humans were living in harmony with nature. Humans will hunt and eat other species to extinction, and have done so innumerable times in the past.
I think humans as a species are and always have been too selfish and too small minded to see the wider consequences of their actions. Witness the ongoing burning or clearing of rain forests all over the world, the rampant overfishing of international waters, or even just the dumping of garbage everywhere from litter on the streets to throwing wet wipes down the toilet. Short term gains (or even convenience) for individual groups of humans will in most cases win over longer term conservation of our environment unless conservation efforts are forcibly enforced in force by other forceful groups of humans who are willing to actually use force. Such is the sad state of the human condition.
In the expansion art during the kickstarter, it said "huge" next to the image, but when the shipment arrived, it was not all that huge...so they called it "pygmy mammoth". It is not really all that small when placed next to a human sized model. IRL a woolly mammoth could be around 4 metres tall.
Looks about right to me. Maybe not the largest individiual that could exist, but still within normal size parameters. Still not "huge" though. "Huge" would be a proper Fantasy mammoth.
This mini was completed August 12th 2020
Pygmy Mammoth, from the Fan Favorites Expansion
Bones 4 kickstarter, delivered 2019
Sculpted by Jason Wiebe
Made in Bones Black PVC
102x52mm bespoke 3D printed base
available from reapermini.com
The dire crocodile, dire boar, and dire crab were one of the Bones 4 addons, and it doesn't look like they've hit retail just yet. Which is a shame, because we need more giant crabs.
The mud on the dire crocodile's base is just some water effect goo dribbled on that half of the base. The barnacles attached to the rocks on the dire crab's base were sculpted with green stuff. The rocks... those are just rocks.
Who's Online 29 Members, 1 Anonymous, 44 Guests (See full list)
- Dilvish the Deliverer
- Xiwo Xerase
- Reverend Shartan
- Cranky Dog