Jump to content
Sign in to follow this  
PhantomAquarist

Obsidian Crypt

Recommended Posts

That top-down shot of the floor is awesome! How did you achieve the gradient between the green and red? Giving such depth and wear to flat stone can be tricky, but you did wonderful, and kept it muted enough to still work well as a game grid.

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites
14 hours ago, Spodi said:

That top-down shot of the floor is awesome! How did you achieve the gradient between the green and red? Giving such depth and wear to flat stone can be tricky, but you did wonderful, and kept it muted enough to still work well as a game grid.

 

Being completely honest all I did was very lightly added two colors to the end of my brush on opposite ends and then went across a few times in wavy strokes and swirls until it looked good. All while avoiding it leaking down into the cracks of the floor. That's how I did it. Probably looks good because natural stuff isn't planned to look natural. It just chaotically happens. Then I topped it off with trying to unevenly paint browns and greens and feathering in some white. Lol. 

Edited by PhantomAquarist
  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      https://www.kickstarter.com/projects/625262290/3d-printable-fantasy-ruins?ref=discovery_category_newest
       
      Story
      Here is my collection of fantasy ruins the can be 3D printed for tabletop games.
      The pledges will be delivered as STL files for you to print on your home 3D Printer.
      Disclaimer: i do not own a 3d printer yet so i have not test printed these models, if you find any error let me know and i will sort out the meshes for you.
      All models have been checked for errors in mesh-mixer and a couple of them will need to be sliced to fit onto smaller build plates some of them already fit onto a 300 x 300 mm plate.
    • By Rob Dean
      I haven’t really been getting a lot of painting done, but I sat down at my painting desk the other day and noticed that I had two buildings sitting over in one corner, neglected for a couple of months, and decided to start adding paint.
       
      This one is from Apocalypse Miniatures.  They ran a Kickstarter back in 2017, and my brother and I both ended up backing this.  In my case, I backed it to the extent of 10 buildings, of which this is the second I have finished. The first was back in November.
       
      In general, this wasn’t too bad to paint.  The little detail bits molded into the base look nice in the pictures, but I would really prefer that they were not sculpted in; it detracts from the flexibility of the building somewhat.  Sizewise, these are a little small for Reaper figures, and are probably intended for a 28mm scale (e.g. Metal Magic, mid-period Citadel, later Ral Partha), but that’s always negotiable when deploying scenery.  This building is a SOLID block of resin, so the game will be played around it rather than through it, and I would as soon buildings in that mode be a bit underscale anyway.  When I say solid, I put it on my kitchen scale, and it’s just a bit over two pounds (935g for those in countries with sensible measurement systems).  You wouldn’t want to drop it on your toe.
       

       
       

       

       

       
      As for the building name, that’s how it is spelled on their web site...
       
    • By Lidless Eye
      Recently completed: The Shipwreck 3D printed from the Kickstarter set Depths of Savage Atoll, by EC3D Designs.


    • By Inarah
      Coming in March.
       
      "3D printable STL files for RPG / wargaming - support-free minis, terrain, and vehicles for your Scifi and Cyberpunk game tables."
       

       

       
       
       
      https://www.kickstarter.com/projects/ecaroth/the-ignis-quadrant-3d-printable-tabletop-models?fbclid=IwAR1Qe9ssykZnV46G-nOv7it4jq_Flry7L4Fufx8_wFOl_-AkRt8Poj8eesQ
       





       
       
    • By Inarah
      Bob Ridolfi's Graveflesh Servant (aka Bride of Frankenstein) in Bones.  I tried to get some different flesh tones on her various parts, do some bruising at the wounds, and not-exactly-sheer fabric effects.  Spent far less time on it than I should have.  
       

  • Who's Online   20 Members, 2 Anonymous, 35 Guests (See full list)

×
×
  • Create New...