Jump to content
ladystorm

Reaper Bones 5: Enthusiasm and Commentary thread

Recommended Posts

Question guys- I went to my Pledge Manager and all the prices are way higher than they were on the actual Kickstarter. For example the 50.00 sets are 60.00. Maybe this was discussed already so I apologize ahead ofttimes, but any idea why this is?

 

Thanks!

 

Never mind, figured it out!

Edited by 72moonglum
  • Like 2

Share this post


Link to post
Share on other sites
3 hours ago, Sirithiliel said:

what i want from fan favorites is too small to warrant its price, myself

Same here. Not a fan favorites I want this time. My order is going to be half of Bones 4 (which, sadly, is still 300-500 bucks. Ouch!)

  • Like 2

Share this post


Link to post
Share on other sites

Lots of stuff from the Bones 5 Update show today.  I'll try to remember details, but could be wrong on some of this.

 

3D render of the Jellyfish from Dark Depths:

 

1450737867_ScreenShot2020-02-21at4_34_52PM.png.950f514d21fad5528c8e10c6c76bfb14.png

 

The cap and tentacles should be a separate part from the central stalk and attached coral-like base.

 

The Overgourd by Mike Disney (Core):

 

1597054212_ScreenShot2020-02-21at4_36_42PM.png.89701da5205897117456ff0e2f58cba2.png1587675187_ScreenShot2020-02-21at4_36_10PM.png.e0b294e3e520d9c4b07c02bcf159cb8c.png

 

Pirate ladies from Brinewind:

 

1937766816_ScreenShot2020-02-21at4_38_56PM.png.8a0b741d430595b7ca2b5b1ddd87cbea.png

 

The Doxie bed from Brinewind:

 

1426849991_ScreenShot2020-02-21at4_41_19PM.png.4dc8592b6deea5d4f2b0b61c150b9363.png1486396977_ScreenShot2020-02-21at4_41_44PM.png.d5bed44b62db22ac946e14811d05ce7a.png1747754788_ScreenShot2020-02-21at4_42_11PM.png.22b7ae9cd97516bf76a141a81bcf3214.png1984397227_ScreenShot2020-02-21at4_42_52PM.png.8e671c8c68d88b99057c245e53cae6d9.png

 

An alternate bed.  It sounded like they may throw in an extra head and foot board, so you can opt to make your bed look like this?  Though maybe a whole bed like this will be included in Brinewind?

The bed is 25mm wide (I think that's the mattress part, but not 100% sure).

 

750261026_ScreenShot2020-02-21at4_45_16PM.png.8e230791ca7215bb6dd7063ddb4ee296.png

 

Then some 3D renders of stuff from the Dwarf King's Crypt, and some 3D prints as well.

 

521333721_ScreenShot2020-02-21at4_47_17PM.png.b4df48733ee810c7747150b5077d5cd6.png1220606925_ScreenShot2020-02-21at4_47_25PM.png.73b9aff006d14db87d427d1d8f5c656b.png

240479016_ScreenShot2020-02-21at4_48_14PM.png.81ee13726c7d84e9d21972d841deaeed.png682967472_ScreenShot2020-02-21at4_47_57PM.png.c1e84288e978dc8c5d692dfc485c94cd.png

 

338829337_ScreenShot2020-02-21at4_49_32PM.png.9cf4f472c2932bd9c7f89f178f010f66.png2065866311_ScreenShot2020-02-21at4_49_08PM.png.9f71f2fe5947ef8d8b3cb93e70520336.png

743133347_ScreenShot2020-02-21at4_50_03PM.png.88742e6bcb302110274b94d1ed209f86.png987237398_ScreenShot2020-02-21at4_49_49PM.png.27729a4c3fb59d411b6bdcb3c36a2b5f.png961449535_ScreenShot2020-02-21at4_49_39PM.png.161a27587b94d734233b97de35bfbe88.png

The dead dwarf part will be removeable (the whole floor piece, leaving a flat floor in the bottom of the crypt).

 

Here is the dwarf king ghost.  He, and all the zombies, will be cast in translucent blue or green, so you can make the zombies ghosts if you want to.

639005197_ScreenShot2020-02-21at4_50_23PM.png.d8776f03d26c2fb9beb219e7655e02e0.png1009810930_ScreenShot2020-02-21at4_50_34PM.png.8dbfaa7f55cec0bf638b44fdceac7c72.png2021287306_ScreenShot2020-02-21at4_50_18PM.png.5a42b9003397869331b21c3eade2e5e5.png

 

Zombie A:

1154618595_ScreenShot2020-02-21at4_52_13PM.png.8ffa336ece1e4e1c09213af6711a844c.png

 

Zombie B:

1115497098_ScreenShot2020-02-21at4_52_26PM.png.c61e5573003859f9a52195d1122e7709.png816419102_ScreenShot2020-02-21at4_52_47PM.png.29311d10a534b424ee33576d06c04dcc.png

 

Zombie C:

958438667_ScreenShot2020-02-21at4_53_00PM.png.6c4f6795ca93b1daa60169219d411a1d.png1096391262_ScreenShot2020-02-21at4_53_27PM.png.bbea260e8137fa738a8cb0c6fea01367.png

 

The eternal flame:

2128651321_ScreenShot2020-02-21at4_51_03PM.png.4195ea82b68dd5bca3894f4eb3170e6d.png1702126402_ScreenShot2020-02-21at4_51_26PM.png.6f8fe3fe45446e78469737acafbc362a.png1120480858_ScreenShot2020-02-21at4_51_17PM.png.d9b71388c9a59d32697de4042973c866.png2115396770_ScreenShot2020-02-21at4_51_35PM.png.9ed060c2c7a02bb4839a75e8d894e1f7.png

The bubbly part I guess could be painted as smoke?  I think that was the idea, at least.

 

1051221339_ScreenShot2020-02-21at4_53_59PM.png.39340ddea860aa20972f110ed917f23a.png529621440_ScreenShot2020-02-21at4_54_18PM.png.68f1f70b189047681e79b84901c2f4b1.png1209213709_ScreenShot2020-02-21at4_58_09PM.png.f6b827d0554e758c82a1456d66ebc42f.png

The dwarf king himself was intentionally made a touch larger, as he is a "boss monster" and he's sort of floating up on wisps, thus why he's basically as tall as Sir Forscale (and they admitted Sir Forscale is on the smaller side, basically admitting to scale creep).

 

That's it, aside from confirming there will be more Power-Ups added to the PM at some point.

  • Like 5
  • Thanks 9

Share this post


Link to post
Share on other sites
3 hours ago, Pezler the Polychromatic said:

When Fan Favourites first popped up during the Kickstarter, I had spent most of my money so I planned to pick it up later on. Then I scrolled down and saw the Buglips figure, and it became an instant addition for me.

The real question:

Does it come with a Scratch 'n' Sniff card?

 

The Auld Grump

  • Like 3
  • Thanks 1
  • Haha 5

Share this post


Link to post
Share on other sites
6 hours ago, TheAuldGrump said:

The real question:

Does it come with a Scratch 'n' Sniff card?

 

The Auld Grump

Well, his whiskers ARE pretty scratchy already. And we can probably smell him from here, so the card would be moot.

  • Like 2

Share this post


Link to post
Share on other sites
12 hours ago, PhantomAsh said:

I know I don't need two of the Dwarf Crypt encounters... but I looking at close-ups is making me want two.

Knowing that they'll be making the zombie dwarves in translucent plastic so they can double as ghosts makes me more certain I'll be getting two. Still no word on the everliving flame, but I'm hoping it'll be translucent, too.

 

I will be unloading the extra group of dwarf heroes, though. I don't really need the first group, let alone a second set..

  • Like 5

Share this post


Link to post
Share on other sites
14 hours ago, Chris Palmer said:

Close up of the Gourd that was posted on Facebook. 

0B3DE379-CF8E-4692-AF9A-608A14903A37.jpeg

Randomly recalled tidbit of info mentioned during the stream:  The central gourd will be 1.5" in diameter.

  • Like 4
  • Thanks 2

Share this post


Link to post
Share on other sites
21 hours ago, vpoirier000 said:

You need the same email as used in the kickstarter to get kickstarter prices

(answered before I read your full post)

Yeah, that’s what I ended up figuring out.  For some reason I’d used a different email to set up my Pledge Manager, or actually set up two, one with the correct and one with  the wrong email address. Who knows what I was thinking?

  • Like 3

Share this post


Link to post
Share on other sites
49 minutes ago, 72moonglum said:

Yeah, that’s what I ended up figuring out.  For some reason I’d used a different email to set up my Pledge Manager, or actually set up two, one with the correct and one with  the wrong email address. Who knows what I was thinking?

 

"If I have two accounts I can buy twice as many minis."

  • Like 1
  • Haha 10

Share this post


Link to post
Share on other sites
4 hours ago, Disciple of Sakura said:

Knowing that they'll be making the zombie dwarves in translucent plastic so they can double as ghosts makes me more certain I'll be getting two. Still no word on the everliving flame, but I'm hoping it'll be translucent, too.

 

I will be unloading the extra group of dwarf heroes, though. I don't really need the first group, let alone a second set..

 

This is my thought, zombie dwarf tomb needs the maximum amount of zombies/ghosts possible - plus I feel like a lot of the set pieces would be better if there were doubles. Those dwarf statues? Definitely need two on either side of an entrance.

 

Same about the extras, though. They'll probably be destined for bits or experimenting if I don't unload them.

 

Also loving the overgourd - though I almost wish it was just a smidge less tall, the vines seem a little bit stretched, I would have preferred it hunkered a bit more.

  • Like 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   1 member

  • Similar Content

    • By Brother Jim
      Right now it's just a Notify Me page.
      Not sure when it goes Live, but it's set to let me know.
       
      https://www.kickstarter.com/projects/legionsofsteel/classic-legions-of-steel-scifi-35mm-metal-miniatures?mc_cid=0895778c30&mc_eid=38a9aa806c
    • By Knight of the Dinner Table
      https://www.kickstarter.com/projects/mapalchemists/rpg-community-moral-support-maps-and-art-packs-for-5/description
       
      Nice guy, his maps are good (backed him before) and doing a good thing here.
       

       

       

    • By SamuraiJack
      https://www.kickstarter.com/projects/greebo-games/necromals-eternal-lethargy?ref=ksr_email_user_new_friend_project
       
      Story
        Depending on the amount of orders received for each project, delivery dates might vary. The initial shipment dates indicated are not final, and even though we're committed to giving all our customers the best service we can, sometimes the amount of orders received might make the final shipment date vary compared to our initial estimates. Please keep this possibility in mind before placing your order.
      Regarding both the bundles and the stretch goals described above, no swaps of model of any kind are allowed. Therefore, please don’t ask us to swap any stretch goal with other add-ons or any perk models with other miniatures, because that cannot be done.
      We created something for those who like to not take themselves too seriously, for those who would like to relax while painting - with less details, but by no means not enough of them - for those who love their minis with a side dose of cuteness overload and, finally, for those who might have children to introduce to miniature gaming, by giving all of these people something that players will love (or hate, as the case may be) no matter their age!
      Wait a minute… delivery estimated after only two week after the campaign ends? A Greebo campaign?!
      Oh yes, and here’s why: because we’ve started production already! We’re convinced that we can reach the campaign goal, at the least, and that’s why we started the manufacturing process of everything. Therefore, the second you complete your Pledge Manager (let us remind all of you, if you don’t complete it, there will be no shipment, so do it!) your package will be processed and sent, just like that.
      We want to open and close this campaign in record time, and we’re confident that we can do it!
      Physical Prototypes Size Comparison     *Meatwork will come in Resin and metal parts             *Meatwork will come in Resin and metal parts
    • By Disciple of Sakura
      http://kck.st/2OP1igG
       
      Kobolds Vs. Goblins is a game designed, tested, built and played by my son Max and me (You saw him in the video).  The concept was something we came up with for a contest on The Game Crafter using roll & write mechanics.  What we ended up making was a fast and fun game that can be played by people of any age.  It's quick and easy to learn and setup is as easy as opening the box. 
       Max and I decided that people shouldn't be forced to buy our game just to play it.  So, you are free to download the full color print and play version of the game using this link.   FREE PRINT AND PLAY  (including solo mode) You'll need 6 normal D6 dice and something to mark the paper.  (For prototyping, we used clear cubes, but pencil with eraser will work also)
       
       
       






      I'll admit... I have no idea how those of you who share KS from others include all the details and fancy stuff. I clearly didn't do this correctly. Munchkin Metropolis traditionally does woodcrafting, and I've been very satisfied with the quality and production time that's come from my prior interactions with him. Figured I'd try and get the word out about his current KS, which he developed with his son.
    • By brushmistress
      A message from Secret Weapon:
       
      Big news time everyone!
      As many of our pledgers know, we need to adjust the Kickstarter - On the positive, we have a good amount of backers and we know that MANY of you are waiting to up your pledges. We have had a really positive response to the product itself, and lots of interest on the customer and retail side. We deeply appreciate this and your support.
      BUT - we have a good amount of backers who are opting to wait on their $1 pledge. This is entirely our fault. We caused this when we locked our core offering behind stretch goals. There is no single item that is core. ALL the options are core. We made it so that many of you had to wait around to buy what you already knew they wanted.
      That's a big boo boo, but it was made with the best of intentions. The system was set up so that there was no mandatory amount, and you added what you wanted and nothing more. We thought that this was better for the customer, but it quickly became obvious the vast majority of backers want jump-in points at set amounts like a usual KS... and weren't entirely sure about a pledge manager that was open during the campaign.
      So, what are we going to do to fix this for you?
      We are going to close the campaign, and relaunch it next week. That sucks and it's embarrassing. But ultimately everything else that happens is great for EVERYONE, because this is what happens next:
      1.) ALL themes will be shown and unlocked right off the bat. If you want Urban Streets or Infinity, you just go get it, no hoops or delays to choosing what you want. You also know exactly what is on offer.
      2.) There will be pledge levels: $50(+), $100(+) and $200(+). The 100 dollar + level will include a set of 3 weathering pigments (really really good ones too - Burning Sands, Dark Earth, and Rust Orange), and the 200 dollar + level will be the pigment set, and a set of 3 genuinely awesome paints. Secret Weapon's Rubber Highlight, Rubber and Tire Black, our most popular colors! At the end of the campaign you will use the Pledge Manager, as usual, to make whatever specific choices you want based on your KS pledge. The Pledge Manger will be available during the campaign for those that would like help figuring out a total pledge level, but that is optional, and you can wait until the end of the campaign to sign up.
      3.) Each of the $50(+), $100(+) and $200(+) pledge levels will have 3 shipping zone options
      Americas, Europe (NOT UK)
      AU, NZ, Asia, Pacific
      United Kingdom (NOT Europe)
      4.) Any extra themes that are developed during the course of the KS will be added immediately, no stretch, we just give you the option as soon as it is available.
      There will be 17 themes live at the time of launch, which doesn't count the licensed product from Corvus Belli and CMON Zombiecide.
      PICTURE TIME

  • Who's Online   12 Members, 0 Anonymous, 33 Guests (See full list)

×
×
  • Create New...