Jump to content
Sign in to follow this  
ChristopherGeorge

Tides of Prophecy RPG QuickStart Guide

Recommended Posts

Hey guys,

 

I've been lurking and posting around these forums for nigh a while now and i thought i'd share a project that i've been working on for quite some time.


It's a tabletop roleplaying Game that i've been working on for about 20 years now as a personal hobby. After much convincing, I've decided to create a 4th Edition and make it available to the world at large.


The Quickstart guide is a free starter pack for the System, including how to make a character, equip them and conduct simple adventures. I'm looking at releasing a Kickstarter next year to release the full core system, but for now i'm just looking for feedback and interest.

https://www.drivethrurpg.com/product/282100/Tides-of-Prophecy-Quickstart-Guide

Check it out, hey, it's free. I'd be very appreciative for any feedback, comments or constructive critique you could provide!

 

Cheers,


Christopher George

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By AussieAusborn
      Greetings y'all!
       
      I'm starting this thread to use as a painting blog, to help catalog my journey, and to use as a source of ongoing motivation. I have a LOT of stuff I've been putting off, that I want to get through for a homebrew campaign I'm working on, and some warbands for Frostgrave, as well. So, I'll take any extra motivation I can get Once I actually finish pieces, I'll make sure to post them in that part of the forum.
       
      To start things off, I have a dragon I've been working on for a couple of weeks, and just got to the point where it's "good enough for now," although definitely not finished. It's easily my favorite piece I've ever owned, so I put off doing any work on it until I was "good enough" to do the piece justice. That is, until I realized that would never happen , so I decided to:
       
      1) Do the darned thing
      2) Do some work on it every day
      3) Push myself outside my comfort zone to try new things
      4) Be patient and forgiving with myself
      5) To not freak out when I try something that I don't like, and just go ahead and fix it
       
      There's still a good amount to do to it (I have a list with 15 bullet points on it, and growing!), but I'm happy enough looking at it, and want to take a break to focus on some other pieces.
       
      I took some progress shots (though perhaps not as many as I'd have liked). So please, join me as we journey through my learning experience:
       

       
      I fully assembled the mini before putting down any paint. Here's where the mini was after a couple days work, about 4-5 hrs. I used an airbrush to give it a zenithal undercoat with black and white, and then to lay in the base coats of the red and blue. I then painted the underbelly and the wing-fingers with a brush.
       

       
      Here, I'm trying to show the work I've done (still fairly subtle, at this point) on building up the vibrancy/transitions on the red skin/scales. I was fairly happy at this point, as I could start to see that I might actually be able to paint this to the standard I want.
       

       
      The next day, I did some work on the face, horns, and blocked in the body spikes. I generally liked the mouth and tongue, but felt it was a bit vibrant. I thought the blue on the horns was alright, but also wasn't completely sold on it.
       

       
      Here's where it was after another `30min of work. Since I felt the tongue was too much, I did something about it! I did a very light glaze with a grey, just to knock down the saturation a bit. Looks better. I added some more blue to the horns, and still wasn't quite happy with it. Picked out the teeth, which is nice, easy bit of definition. And that eye!!! It looked much better than I expected, although that's the last time it would be that well defined...
       


       
      Here it is after another couple days of progress, building up that red (it takes soooooo long on something this big!!!!), as well as more work on the mouth/face. I'd accidentally painted over the eye (which becomes a recurring theme in this tale ), so I blocked in some color, just to separate it from the face. I added a glaze of 'RMP's fair skin' to the tongue, and now I'm lovin' it. Also added some fleshy-ness to the gums on the upper jaw (though it's a little hard to tell), and that was definitely another good decision.
       

       
      Here I continued to build up the red, progress is slow but steady. Not pictured (which is unfortunate, because it was a good learning experience) is my attempt to redo the horn entirely, to a scheme that was a transition of bone to brown to black at the tip...I was really unhappy with it. I had the bone starting around the eye ridges in at attempt to add more contrast and draw the viewer's eye towards the face, but it just looked awful. So I spent a good while redoing the horn and fixing the whole face. I'm glad I made that mistake, as I think the face looks much better than it did before I started on the horn. Part of that was adding in a new level of bright highlights.
       

       
      Here's the mini in some soft lighting, and although the picture is kinda blurry, it better shows the transitions throughout the red. I think this was also the point where I started working on shading the red, by applying a light blue-black glaze to the shaded areas, which really helped add some contrast to the piece.
       

       
      I had an accident that almost gave me a heart attack, where the figure seemingly jumped off the desk Luckily, I caught it before it hit the ground, and it sustained no major damage. It did separate where the dragon attaches on to the base, and although that was a little frustrating, it ended up being a happy little accident, as it made it MUCH MUCH easier to work on the base. I started by putting down some paints and pigments, until it was at a place I thought was ok. Also, the rock spire that it's curled around was originally about 6 inches taller, which I cut off to better see all of the dragon. So, I started work on sculpting a new top. I started by building up thin layers of cardboard with superglue, to level it off (it had quite a slant to it). Then I mixed up some greenstuff, and tried to match the overall flow and texture of of the rocks. Although not a perfect match, it's close enough to not be distracting. Mission accomplished!! The pillars were a part of the mini.
       

       
      And here's the beast in its current state. I painted the newly sculpted top to match what I'd already done, and left the pillars with a super quick drybrushing. I touched up the eye to look acceptable (it's on my 'to do' list), added some grass tufts to the base, and was happy to leave it be like this, for a time. The final pic is another attempt to 'more accurately'  show the value transitions with the red, though the colors seem a tad washed out.
       
      Thanks for taking a look at my work, and for reading my ramblings! C&C is welcome  As I said, I have a to do list for the dragon, but I'm not afraid to add more to it!!! I'll strive to make a post in here a few times a week, and eventually you'll get to see a completed dragon!
       
      EDIT: I forgot to mention that once the dragon broke away from the base (super cleanly, luckily), I took the opportunity to redo the underbelly on the whole model, darkening it up some. And along the neck, I experimented with wet blending for the first time! I've been apprehensive to try it before, but decided this was a good spot to experiment, as it's a large enough area, but felt less...consequential, I guess, if I messed it up. And I'm pretty pleased with the result!
       
      Next up: Frostgrave warbands for me and my brother!
    • By Darcstaar
      Starting up another, now that Janan is done.
      Satheras, Male Warlock.  He had a really bent staff.  On the behind shot you can see I cut it off at the hand, wedged a bit out and re glued it into a straighter angle.  I also cut him off his integral base, since it had no texture.
       



      Hoping to try to get a little better at OSL on him, with a green gem in the staff.
    • By Citrine
      I just cannot get this mini to come out the way I want.  This is my second attempt, and I got just a stuck as the first time.  I finally decided to just finish it and call it done.
       
      Reaper Bones Spirit of the Forest (SKU 77184)
       


    • By Darcstaar
      Brought some painting models for vacation.  Finished the Hell Hound last night, didn’t WIP it.
       
      Had Yephima on my shelf of shame for a long time.  If it ends up 1/100 as good as the studio version I’ll be happy.  Plan on light blue skin and silvery hair, like the Bestiaries suggest.  Other than that, not sure...

       
      Here she is primed with Brown Liner.  That’s gonna take some work to get the skin tones brighter.
    • By Orlando_the_Technicoloured
      https://www.kickstarter.com/projects/yetlblack/corvus-corax-miniatures-sons-of-yetl-black
      Story
      Corvus Corax Miniatures is a small hobby project created in 2013. Since then, four projects have successfully funded on Kickstarter and all have been fully delivered on time without any delays. The feedback from the backers have only been positive!
      The goal of this project is to raise funds for the production a total of four (4) miniatures for the Sons of Yetl Black. The miniatures will be cast in high quality, non-toxic resin. The scale of the miniatures is 35mm (measuring to the eyes in a standing, straight pose, although some characters may be slightly larger because they are supposed to be large characters).
      Strendu Bodaway Pachoa Niyol  (Actual copies of the resin miniatures. Note that the resin miniatures below are not 100% in scale with each other, but resized for editing purposes.)
        Grefven always makes lovely things and is a reliable KS creator
  • Who's Online   22 Members, 0 Anonymous, 38 Guests (See full list)

×
×
  • Create New...