Recently Browsing 0 members
No registered users viewing this page.
Ok, so next week I'm gonna be replacing the LCD in my printer finally, but I'm also gonna replace the noisy fan on the very bottom of the printer. I finally found a good shot of the guts from the bottom:
Now the fan I ordered a few months ago is definitely not the one I need as it's one of the filter fans. So I'm gonna have to order a fan this week. That is why I'm posting here. What fan is good for this?
I've read where someone has modded theirs to run a 120mm fan, I just wanna do a direct replacement of it. One caution I have is the connections. Does the fan just clip into one of the white connectors or is it one that the wires go into the posts that screw down (like on a Ender 3)?
Funny how now I find this site vs trying to find anything these past few months:
(note the fan wire, it clips into one of the white connectors (yeah!!)
Any help will be appreciated for this.
How do you make an octopus laugh? You give him ten tickles!
Wanted to show off this little octopus that I sculpted from some leftover green stuff. I don't have much experience with sculpting other than a few simple embellishments on minis and a couple of snake swarms I made once. Wanted to try something relatively simple and figured an octopus would be pretty forgiving.
You can see more about how I made this guy and more of my nautical minis in my Dark Tide WIP thread HERE.
I sculpted and painted this guy in two evenings and am happy with hos cute it turned out. It's not the most accurate, but I'm proud of it. It definitely has given me greater confidence in my ability to make something out of nothing.
More Photos Beneath the Spoiler:
So for awhile now I've had this goal, nay, this desire, nay, this primal compulsion to build a boat. It is not enough to have hand drawn maps, or 2D terrain tiles. I need a fully functioning 3D boat! Well, maybe not fully functioning. But I want to build a cool boat!
I've been working on a nautical campaign full of swashbuckling, sailing, and sea monsters for a few years now. It's my White Whale project. Always just on the horizon. It'll happen some day, but in the meantime, I have a million small projects to complete and extend the chase. One of which is my desire to build a few different sized ships to enliven any possible naval combat.
I actually attempted this about two years ago, just winging it and making some measurements and throwing them at some craft supplies. I wanted a cheap option that wasn't too difficult to repeat that way I wouldn't be discouraged from making multiple ships. So I limited it to cheap crafting materials like foamcore, wooden dials, popsicle sticks, and thumbtacks. And the result wasn't bad. Especially for my first attempt at any kind of terrain building.
It actually turned out rather nice! To my surprise. But I got hung up on mast and sail designs and never finished.
The wood on the deck had 2x1in grid carved into it for easier D&D use.
and the figurehead was designed to be modular.
However, overtime the boat collected dust and little scratches. I should have given it a coat of mod podge or sealant of some kind, but never did. And eventually it had an unfortunate run in with an injured owl that we took in for a night.
Here's the little devil himself.
Anyways, I put this project on the back burner for long enough and feel inspired to dive back in. Especially with a certain Bones ship on the Horizon that I'm still on the fence about getting. I was doing some browsing on the web and recently found this wonderful little blog complete with loose instructions and a plan from a now defunct wargamming site. The blog creator had found the old plan and adapted it to build something using most of the same materials I have already stockpiled.
There's a few choices that I like better than my first attempt so I think I'm going to use this as some inspiration as I give this boat thing another go.
My hold up now is still those darn masts. The original plan above used wood and required drilling out holes for the masts. The blogger use foam for his ship and found random bits of tubing to house his masts. I could try to find something random like that, but I was hoping to find something simpler for easy repetition. And I would also like to keep the masts loose so they can be removed for easy storage, or to swap out the sails. Any thoughts?
Any resources, tips, recommendations are very welcome! I'll post back here with any updates.
I wanted a traditional Black Pudding, but I didn't want to just paint it black. When I started to think about how to make this stand out, I started to think about the shimmer that oil gets, and I wondered if Black Puddings get that shimmer as well. I looked up some photos, and thought, "I bet I can do this." Like I said in the other thread, I'm planning on putting together a tutorial on getting this effect, so that'll be up soon. This one was fun to paint! I love all the little bits and bobs in the ooze.
Who's Online 16 Members, 0 Anonymous, 46 Guests (See full list)