Recently Browsing 0 members
- No registered users viewing this page.
This is the second miniature I've ever painted, and the first with Reaper paints. I figured that a brush holder would come in handy for the all the Bones V painting in my future! The only Reaper paints I own are the Bones V paints (Learn to Paint kit and the two collections), plus two bottles of Reaper MSP 9038 Rainy Gray.
Overall I'm really pleased with the way this first attempt worked out! I primed everything with 9038 Rainy Gray, then put on the base coats. The wings and ears gave me the most trouble as I had generously overpainted with 9410 Dragon Green, and was attempting a wet blend with 09468 Brilliant Red and 09218 Lava Orange. They required seven or eight coats before I got solid coverage over the green. Once everything was painted and cleaned up, I did a dry brush highlight pass, and then sealed it with two coats of Rust-oleum Crystal Clear Enamel and one coat of Testors Dullcote. I waited 24 hours between each coat to give it plenty of time to dry. I also masked off the gold pile prior to the Dullcote to make sure it would stay shiny.
Some things that could have been better:
The eyes should have been a different color to make them pop, instead of disappearing in the face. Additionally the right eye is quite muddy and the pupil gets lost amidst all the black veins. I was getting tired of working on Rocky at this point and wanted to get it finished. Ideally the eye would have been repainted. The left eye is better, but still gets lost in all the green. I forgot that my wash darkens the mini, and didn't paint in brighter colors to compensate, which means overall it's quite muted and dark.
I saw the Rocky miniatures, and with how cute they are I could not resist getting one to use as a dragon to send against my players. As such, here is my take on the Flying Rocky, as a juvenile Red Dragon!
Comments, criticisms and advice as ever more than welcome!
This is our 14th Chibi miniatures project! 7 years ago Andrew May of Meridian Miniatures launched the Tooth & Sword line of Chibi miniatures. The models were hand sculpted and were a line of chibi that I loved ever since I saw them. A couple years ago Meridian discontinued selling the entire product line. Fast forward to today and Impact! was able to negotiate a purchase agreement for the entire line of Tooth & Sword chibi to bring them back to everyone that missed a chance to own them.
However technology improvements have allowed Impact! to 3-D scan all these hand sculpted models and now offer them as high quality digital models for you to print at home as well as remastered physical models as good as the originals. The 3-D scans also allowed for new versions of the Tooth & Sword models to be offered as Stretch Goals!
We want your feedback, so please leave comments. We plan to engage our backers and would love ideas for other variants that you think need to be stretch goals.
The digital models will be sent as STL one piece models within a month of the project ending. All of the one piece models will be sent in both no supports AND supported formats.
In addition, if you want the models will be available as physical one piece 3-D prints as well in super high quality resin prints. Prints will be grey and will come with bases (as many are not free standing models). MODELS WILL NOT BE PAINTED!
The normal models will be roughly 30mm to top of the models head. This may vary slightly from model to model. There is also a Hippogriff model that will be a bonus model if you get all the miniatures which is 50mm in size.
This is our 12th Chibi miniatures project. Over the last 5 years at conventions, our Pony Chibi from our previous KickStarters are always the most popular figures and we love hearing the happy sounds of people seeing them for the first time in the display cases. Now as technology has greatly changed we wanted to add new ponies and accessories to the model line and now offer them to everyone as digital models to print at home for yourself!
The digital models will be sent as STL one piece models within a month of the project ending. Models will be sent without supports (we will have a stretch goal to buy software and add supports to all the files).
Due to Stretch Goal #1, the ponies will also be provided with STLs for the different components of the models, so you can use a free product like Meshmixer to mix and match parts from the different models to create your own ponies.
In addition, if you want the models will be available as physical one piece 3-D prints as well in super high quality resin prints. Prints will be grey and will come with bases (as most are not free standing models)
The miniatures will come in two sizes. The base pony figures will normally be 30mm tall to the top of the figurine's head and a couple large pony figures will normally be 50mm tall to the top of the figurine's head (the Nightmare and Kirin are large ponies)