Recently Browsing 0 members
No registered users viewing this page.
Behold, Sharn the half-orc. She's all STR and CON. She hits hard and can take a hit, but don't call her burly or she's liable to knock you out. She's only half an orc and her human half believes she's a pretty flower.
I built this mini using Heroforge's software then printed it at home on my 3D printer, then of course, I painted it. Not bad for a first print.
After the success of our first Kickstarter, we are now opening phase 2, which focuses on fantasy games. This time, we bring a fun and fresh way to level up any dungeon as well as table top miniatures. We have designed more than 60 magical effects, traps, tokens and condition rings to customize your work of art.
Every player is different, and now, providing an army, hero, or dungeon with a unique look is possible. Creativity is limitless! This new market is allowing us to create and offer highly detailed effects for people to print right after they purchase one of our packs. And we are eager to see what people do with them. We are confident that any hobby enthusiast will find many uses for these effects, just like we did.
We’d like to thank you all for taking a little time to see what we have created and sharing your thoughts.
A new series of 3D printable effects for your Wargame Miniatures and Dungeon sets!
Marvelous designs and outstanding special effects quality Beautiful sculpting based on actual dynamic simulations. Ideal for wargames such as D&D, Warhammer, Pathfinder, LOTR or any kind of diorama. Unbelievable price relative to the quality. A limited collection for limitless printing. ***Included in the Arcane Edition Bundle***
Visual representation is our main goal on this Kickstarter. Spells like "Create food and water" can now be 3D printed and represented on your tabletop games. Fire balls, dancing lights and way more to come!
King's Fest, Bull's Strenght, Celerity, Eletrified Area, Dancing Lights or Slippery Floor are some of the tokens we painted! FDM or resin, both will look amazing on your dungeon. Traps are part of the arsenal of D&D masters and dungeons. We give them a personal touch using FX and lights. Perfect to decorate and display on deadly dungeons and battlefields!
We have created an easy and visual way to represent your buffs, magics ,props and equipment without modifying your miniatures. You can add buffs like Bull's strength, magic shields and more.
We added 4 anchors to the bases and a lot of generic spells and buffs that work with tons of games. All of them already tested in filament and resin printers.
We'll provide a wide range of different inner diameter, and more different types in the Stretch goals! Painted samples of a Spellbase with Bubble Shield, Bull's Streght and a combination of a few spells We wanted to represent debuff and condition so you can place it on your miniature easily. Not only a card/token close to the mini, which creates confusion sometimes.
With that in mind, we have created a collection of rings: bleeding, confusion, sleeping and poisioned.
We love minis, for that reason we have created miniatures for our campaing, to show a few examples of the use of our spells. (Human wizard included in the initial bundle)
They are going to be the big stretch goal of our campaign! If you like our designs, stay tunned to our social media!
Our elder wizard and two of our Stretch goals Characters! It's hard to decide which effect or prop we want for your wizard!. So we have designed a wide variety of props and spells ready to be used on your collection of minis and BattleFx Fantasy minis.
Hobbypalooza studio made an amazing paintjob with our Wizard! We've prepared them to be easy to magnetize. It's the best way to visualize how your characters evolve or change their equipment.
We have designed our miniature hands, spells and props with 2x1 mm magnets holes. Most of our FX are perfect for tons of games, not only dungeon crawlers. The collection we present is more focused on wargames.
Painted samples. Fire Arrow (FDM - Ender 3), Fire Ball (FDM - Ender 3) and Gunpowder Weapon FX (Resin - Elegoo Mars) Firewalls, perfect for the deadliest wizard or to populate your battlefield. Dangerous terrain with vines or spider webs! We did a collection of magic walls, with 1 and 2 tile size.
All 3D printed in FDM and painted by us! A bit of color make them pup! Wizard with hat, Fire Ring, Square 20 and 25mm Spellbase Permanent Storm Spell ( two parts) and Big Tornado Spell Key Spellbase, Frozen Ring , Fire Arrow Model 2 Doctor Strange's Shield ( two types) and Doctor Strange's Hands Saw Trap and Spellbase Scroll The Project is organized into 7 sets grouped from smaller sets to bigger sets. All of them have the Arcane edition bundle included. Limited set are marked as such, with special rewards (CustomFx) that you can check below.
"Bullet shells and spells" pledge, include our first kickstarter (BattleFx), with all the stretch goals and custom FX, you can check the content here.
We want to thank the community allowing them to create their own effects. People tell us what they have in mind and we make it real. That simple. Everybody has imagined a personal customization for its mini, dungeon or tabletop game. We would like to offer them the opportunity to create that dream or specific effect for a lower price than on request.
These effects are divided into three categories: S, M and L. (small, medium and large, but not only means size, also complexity).
"S" Size Samples "M" Size Samples "L" Size Samples The S category includes small effects of little complexity. The M category includes either a small and complex effect or a medium one of little complexity. And the L category includes large simple effects or small and medium effects of high complexity.
Our effects are generic but totally adaptable. Still, if people have an idea, they can carry it out, we will design it for them. All Custom will be realeased for EVERYONE! So, If you think the 3D printing community need that idea, here is the perfect ocasion!
We learned a lot of our previous Kickstarter, so now we have a more solid website and a bigger team. We want everything to be delivered perfectly. Check all the stages below:
Please note that while we’ll do our best to meet these dates, they are an estimation. Read the Risks and Challenges section below for more information about this matter.
Only 3 hours left, but...
Hi Kickstarter, it’s PrintDry. In 2016, we did our first Kickstarter campaign and found that many people were interested in improving the quality of their 3D prints. 310 backers with CA$41,747 helped us bring our project to life. Since then the PrintDry products have found over 20,000 users in over 50 countries. We are really grateful to all our backers.
In the past 3 years, our research and development efforts haven't stopped and we always want to offer the best solution to the 3D printing community. After launching the filament storage container and a vacuum version . We have revisited the original dryer design and updated it into the PrintDry Filament Dryer 2.0.
As many of us know from experience, a lot can go wrong with 3D printing. One of the most important factors is moisture buildup in the filament, which is a simple but often hard to identify issue that continues to plague many printing jobs. If a quality print is desired, you can’t ignore it.
Now, we would like to introduce our new product called the PrintDry Filament Dryer 2.0 which has many new features, such as large spool compatibility, a built-in timer, a digital display, and a modular design. The PrintDry Filament Dryer 2.0 is the only dryer that can dry and feed large (2-5kg) filament spools with a 300mm (12”) outside diameter (OD) . It’s the ultimate filament dryer you need for quality 3D printing!
Play Easily adjust the temperature with 5 presets (35ºC, 45ºC, 55ºC, 65ºC, and 75ºC). Built-in timer with a maximum time of 48 hours. Vertical Mounting
Spool Adapter included
2 metal shafts 4 big spool adapters 4 small spool adapters Accessories
one dryer+ one vacuum container+ one pump One dryer includes: 2 metal shafts; 4 big spool adapters; 4 small spool adapters Reward Tiers
The PrintDry filament dryer 2.0 will be shipped worldwide! However, please be aware that for some countries VAT/duties may incur upon receipt of your unit. These fees are the responsibility of each international backer.
This is the first of my Ulvheim modular townhouses. It's not quite finished, but when @Reaper_Jon put up a call for terrain for Ed's Terrain Tuesday shows, I wanted to share it.
This is the first of 8 buildings like this. This uses just about every tool and terrain skill in my arsenal.
The bottom floor is 3d printed modular pieces from Markus Kruse's Terrain4Print stuff (available on Thingaverse and Patreon) that are glued together and painted.
The upper floors are foam core, with 3d printed windows, and balsa wood trim.
The roof is mattboard with paper shingle strips. The mattboard is held to the proper angle with some 3d printed "rafters", which I didn't show here.
Besides the usual Xacto knives, glue and paint, here is what else I used.
I used Campaign Cartographer to draw my templates for the foam core, which were printed to size, laminated with 10 mil sheets, and carefully cut out. This allows me to quickly measure and cut the foam core to size. CC3 was also used to print a wooden "floor" to put on the bottom of each floor. That part was done as an after thought, mainly because it was quicker than painting the interior.
Fusion 360 was used to design the window inserts and the rafters, which were printed on my 3d printer.
The roof shingle strips were drawn in Silhouette Studio, and cut on my Silhouette SD cutter. Putting them on is tedious work, but the pay off is worth it, IMO.
My airbrush was used to put the base coats down on the foam core. On this particular piece, the wood was glued down first, but I learned that makes painting the trim very tedious. My son suggested that I paint the wood before putting it on.
Since these are primarily for wargaming, the interiors are left completely open. My son has expressed some interest in using CC3's dioramas add on to create some modular interiors for them, but I'll leave that project to him.
I still (obviously) need to finish the roof and paint it, less obvious is painting up the doors for the first floor.
I have the foam core shells built for the other 7 units, some of them with wood already on them. So those pieces will be just as tedious to do as this first one, but the later ones I've already started staining the wood, and have airbrushed the base coat down.
I will get fancier on a couple of the roofs, adding things like dormers or chimney's - I just have to keep in mind that anything I add needs to hold up to the game table.
I would love to run an campaign where a holy paladin hates demonkin due to his biases as a defender of the righteous and then, thru the course of the campaign he falls in love with a demonkin lady. Torn between his moral code and his heart the paladin must choose between duty and love. That was the inspiration for this mini which I designed on Heroforge. Sorry the picture is so overexposed, I am struggling to work with my new camera phone.
Who's Online 22 Members, 3 Anonymous, 26 Guests (See full list)