Jump to content
Sign in to follow this  
Ducknuck84

D&D Chainmail Ahmut's Legion Battered Troll Skeleton

Recommended Posts

From the Mid 2000's attempt to revive the D&D Chainmail come this Battered Troll Skeleton which was the biggest mini in the Ahumut's Legion Faction box. He has been sitting unpainted for many years as I  have found with many of the minis the D&D produced at the time they where a pain to assemble. In his case the full arm and no peg or post and his skull with a bit of the neck was its own part with a minuscule peg and post that did not fit right and would never be able to support the weight of the head. also with the base you had to hand cut the slot that you would tab him into which is the only time i have ever seen that on a mini base. So finally after adding metal post to his parts and getting him on a base I sat down and painted him.

He is your basic skeleton but I do like the little additions on the mini such as the splint holding the leg together and the leather wrap with a nail holding the arm in place  as well as the plate bolted on to the chest. It give the mini a bit more character. After finishing him i wanted to work on basing which is a part of the process i tend to neglect so tryed my had at some mud texture paint and still trying to get decent at using static grass and tufts. think it turned out alright but can always use more practice.

Also interestingly enough he is about the same size as the  77004 Cave Troll. So its like a before and after diet pic ::D:

555004064_trollskell.jpg.af7b930f79a6a79860b6183eb8bb2415.jpg

1882539485_trollskell2.jpg.06748c20da675c2f08573e6d074ec3b8.jpg   1132131509_trollskell3.jpg.5025dc56494cd473ceac3dfd51841183.jpg

  • Like 21

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By nihilville
      Still trying to cover all my basics with this classic troll design. I'm trying to get better with my basing, this time incorporating sand and some broken up wood chips.

    • By Maledrakh
      Nolzur's do make a few great monster minis, even though most -if not all- of their humanoid minis are too small, weedy and have too shallow detailing for my liking. Here is one:

      Yep, a dead head.

      50mm base.
      The main colour is Citadel Contrast Plaguebearer flesh, the rest is regular paint.
       
      This mini was finished September 12th 2020.
       
      Zombie Beholder
      Nolzur's Marvellous Miniatures, Wave 11 2020
      Wizkids
      I have no idea who sculpted this, as WizKids do not -as far as I know- publish this info.
      PVC,
      50mm base
    • By MoonglowMinis
      I've got more dead things for you today.  @Igormortis isn't the only one looking for some dirty dead!  Here's my little collection of swamp zombies.


       
      The crowning jewel of this set is of course the Dreadmere Wight from Bone 4 Dreadmere.
       


       
      He's got plenty of character packed into such a simple model.  I love him.

      Along side him we have a repainted Zombie from D&D Giants of Legend prepaints (#40).



       
      I've had this guy for ages, way before i learned to play D&D or ever picked up a mini brush.  His paintjob was pretty bland and I definitely think I (un)livened him up.  Would make a great shaman-type mini.

      And filling out the horde we have the Zombies from the Castle Ravenloft board game.  Again.  Rather bland sculpts, but I like them a lot more now.  Their weird posture was the inspiration for the swamp theme as I imagined them pulling themselves up out of the muck.



       
      All together, they're a fun thematic set and add for some variety to my dusty Graveyard Zombies.

      Which one do you like best?
    • By MoonglowMinis
      Crawling back from the dead here with this fun little handful of zombies!  Added some gravestones to a few of them using popsicle sticks.  Just good ole' classic grave crawling zombies.  Went for a dusty color palette.
       
      Which one do you think turned out best?
       

       

       

       

       

       

       

       

       

       

       

       

    • By AussieAusborn
      Greetings y'all!
       
      I'm starting this thread to use as a painting blog, to help catalog my journey, and to use as a source of ongoing motivation. I have a LOT of stuff I've been putting off, that I want to get through for a homebrew campaign I'm working on, and some warbands for Frostgrave, as well. So, I'll take any extra motivation I can get Once I actually finish pieces, I'll make sure to post them in that part of the forum.
       
      To start things off, I have a dragon I've been working on for a couple of weeks, and just got to the point where it's "good enough for now," although definitely not finished. It's easily my favorite piece I've ever owned, so I put off doing any work on it until I was "good enough" to do the piece justice. That is, until I realized that would never happen , so I decided to:
       
      1) Do the darned thing
      2) Do some work on it every day
      3) Push myself outside my comfort zone to try new things
      4) Be patient and forgiving with myself
      5) To not freak out when I try something that I don't like, and just go ahead and fix it
       
      There's still a good amount to do to it (I have a list with 15 bullet points on it, and growing!), but I'm happy enough looking at it, and want to take a break to focus on some other pieces.
       
      I took some progress shots (though perhaps not as many as I'd have liked). So please, join me as we journey through my learning experience:
       

       
      I fully assembled the mini before putting down any paint. Here's where the mini was after a couple days work, about 4-5 hrs. I used an airbrush to give it a zenithal undercoat with black and white, and then to lay in the base coats of the red and blue. I then painted the underbelly and the wing-fingers with a brush.
       

       
      Here, I'm trying to show the work I've done (still fairly subtle, at this point) on building up the vibrancy/transitions on the red skin/scales. I was fairly happy at this point, as I could start to see that I might actually be able to paint this to the standard I want.
       

       
      The next day, I did some work on the face, horns, and blocked in the body spikes. I generally liked the mouth and tongue, but felt it was a bit vibrant. I thought the blue on the horns was alright, but also wasn't completely sold on it.
       

       
      Here's where it was after another `30min of work. Since I felt the tongue was too much, I did something about it! I did a very light glaze with a grey, just to knock down the saturation a bit. Looks better. I added some more blue to the horns, and still wasn't quite happy with it. Picked out the teeth, which is nice, easy bit of definition. And that eye!!! It looked much better than I expected, although that's the last time it would be that well defined...
       


       
      Here it is after another couple days of progress, building up that red (it takes soooooo long on something this big!!!!), as well as more work on the mouth/face. I'd accidentally painted over the eye (which becomes a recurring theme in this tale ), so I blocked in some color, just to separate it from the face. I added a glaze of 'RMP's fair skin' to the tongue, and now I'm lovin' it. Also added some fleshy-ness to the gums on the upper jaw (though it's a little hard to tell), and that was definitely another good decision.
       

       
      Here I continued to build up the red, progress is slow but steady. Not pictured (which is unfortunate, because it was a good learning experience) is my attempt to redo the horn entirely, to a scheme that was a transition of bone to brown to black at the tip...I was really unhappy with it. I had the bone starting around the eye ridges in at attempt to add more contrast and draw the viewer's eye towards the face, but it just looked awful. So I spent a good while redoing the horn and fixing the whole face. I'm glad I made that mistake, as I think the face looks much better than it did before I started on the horn. Part of that was adding in a new level of bright highlights.
       

       
      Here's the mini in some soft lighting, and although the picture is kinda blurry, it better shows the transitions throughout the red. I think this was also the point where I started working on shading the red, by applying a light blue-black glaze to the shaded areas, which really helped add some contrast to the piece.
       

       
      I had an accident that almost gave me a heart attack, where the figure seemingly jumped off the desk Luckily, I caught it before it hit the ground, and it sustained no major damage. It did separate where the dragon attaches on to the base, and although that was a little frustrating, it ended up being a happy little accident, as it made it MUCH MUCH easier to work on the base. I started by putting down some paints and pigments, until it was at a place I thought was ok. Also, the rock spire that it's curled around was originally about 6 inches taller, which I cut off to better see all of the dragon. So, I started work on sculpting a new top. I started by building up thin layers of cardboard with superglue, to level it off (it had quite a slant to it). Then I mixed up some greenstuff, and tried to match the overall flow and texture of of the rocks. Although not a perfect match, it's close enough to not be distracting. Mission accomplished!! The pillars were a part of the mini.
       

       
      And here's the beast in its current state. I painted the newly sculpted top to match what I'd already done, and left the pillars with a super quick drybrushing. I touched up the eye to look acceptable (it's on my 'to do' list), added some grass tufts to the base, and was happy to leave it be like this, for a time. The final pic is another attempt to 'more accurately'  show the value transitions with the red, though the colors seem a tad washed out.
       
      Thanks for taking a look at my work, and for reading my ramblings! C&C is welcome  As I said, I have a to do list for the dragon, but I'm not afraid to add more to it!!! I'll strive to make a post in here a few times a week, and eventually you'll get to see a completed dragon!
       
      EDIT: I forgot to mention that once the dragon broke away from the base (super cleanly, luckily), I took the opportunity to redo the underbelly on the whole model, darkening it up some. And along the neck, I experimented with wet blending for the first time! I've been apprehensive to try it before, but decided this was a good spot to experiment, as it's a large enough area, but felt less...consequential, I guess, if I messed it up. And I'm pretty pleased with the result!
       
      Next up: Frostgrave warbands for me and my brother!
  • Who's Online   15 Members, 1 Anonymous, 34 Guests (See full list)

×
×
  • Create New...