Recently Browsing 0 members
No registered users viewing this page.
So, just what happens when you take the desire to paint some sort of armoured vehicle or tank, and a rather fondness for gnolls? Well, you say screw it, let's see what would happen if gnolls STOLE A TANK! (and a LAV).
This definitely isn't going to be NATO greens, or even remotely close to JGSDF colours. Green may be involved at some point, but not any actual real world colouration patterns...
Naturally, ignore the obvious answer of "why not?!?!" what kinds of things give a fox inspiration for this project?
Ghost In The Shell (the original video/movie) Akira also arguably has some inspiration for this too (both the manga, as well as OAV/OVA) Shenanigans and mischief Various musicians, but Daniel Graves especially (Aesthetic Perfection). A LOT. Borderlands, specifically Borderlands 2
Or, in short, I'm going into this with a few ideas, but not necessarily any particular plan...
^First up, is the initial haul. There's more in the mail (Toghra, as well as Reaver of Kargir), and they should hopefully be here in a few days. So up for contemplating I have two 1:48 scale kits from Tamiya, the JGSDF Light Armored Vehicle (aka LAV) as well as the Type 10 Tank, also from the Japanese Ground Self Defense Force. Miniature options include two different sets of Wizkids gnolls as well as the Pathfinder Deep Cuts, and for Reaper options we have a Krokuta, Bones Blacktongue, Bones Bloodmane 77236, as well as Bones Gnoll Warrior 77012 (to me he looks likes the Bones version of Boneflayer 14580). So yeah, seems like an easy-ish task right, take something that's 28mm scale and pair it with a 1/48 scale model. what could possibly go wrong?
^Okay, didn't quite realize the words "challenge accepted" would actually mean I'd have a decent sized challenge on my hands. Looks like my initial ideas are moderately out the window, or, uh.... Stuck in said window. Original idea was for dual knives/stabby blades gnoll to be the LAV's driver, with Blacktongue poking out of the gunner's hatch... And for the tank, Toghra to be poking out of the commander's hatch directing things.... And then Krokuta and others hanging out in the back or off of the back of either vehicle... I... Uhh... Might be rethinking a few things.
Alternate caption for tank: Here's JOHNNY! Seriously, I've never watched the shining, but that's definitely the first thing I saw with Toghra's expression at that picture's angle...
...I probably should have thought about the fact that these vehicles are designed for a nation who's average height is 5'2" (yay Google!) and also according to Google (and the Forgotten Realms Wikia) gnolls are 7' - 7'6". Hmmm. Okay, so it's going to be cozy.
Let's start with the LAV, as for some reason that one keeps really snagging my attention, as well as ideas and inspiration...
^Wait a moment, the Pathfinder Deep Cuts ones are noticeably shorter... Well now. He'll fit, more or less, and with some work I could probably get dual stabby guy poking out of the roof....
^Two-ish hours of arduous assembly later (it's my first time doing up a model kit AND my first time using plastic glue, and there's six bajillion parts for some reason), and we're looking at this. Dashboard isn't attached, and the bases have been trimmed off of the two gnolls in question in order to better fit them. This is my basic premise... And where I left off last night.
^So first off, a basic test fit of the larger, stabbier gnoll. He barely fits... Good. Things will get tighter once the hatches go in, but I'll worry about that when that particular time comes...
^A while with some tools, and we're now here. Ignore the crooked dashboard, that happens when it's just sitting in place...
^Currently how things are looking in order for me to mostly fit the driver in. As eagle eyes might notice, I'm going to have to redo the legs, or more appropriately, the LOOK of legs. Since they tuck down into an area where they won't be seen, I went for the cruder approach. Sure, it isn't as pretty, but I did specifically purchase these minis with the impression that there might be some cutting involved... Odds are though he won't be keeping the axe (that formerly was a polearm or halberd?).
So that's where things are at the moment...
I've also been thinking about how to explain the smaller sized gnoll, and how he's part of the raiding party, since they're known for being more of a cruel society, especially to outsiders. Well, in short? I've come up with the basic premise that the smaller ones not only survive through perseverance, but also since they're smaller, they're able to get into tighter nooks and crannies, and therefore picked up skills that would make them not only useful to raiding parties, but also considered an essential, even valued partner. That's right, they taught themselves... to HOTWIRE VEHICLES. Sure, there are many ways of building vehicles, but it's nowhere near as much fun as just outright stealing them from someone else, and then using such for their raids, and cause a great deal of mischief and mayhem, potentially being able to raid even more through the initial confusion...
Wear and tear is usually a welcome addition to most vehicle models. After all, tank armor is made to take a few hits.
One of the things to keep in mind when painting something like that is the story it tells. Where and how you place it tells of how the damage happened. Rusty areas are older than shining metal showing through- moreso if there are streaks of rust leading down. A combination of rust and metal shows that this is a place where the rust layer gets scrapped off.
This vehicle is from Seedy Tea Publishing‘s Simulacrum Protocol line.
This is Tamiya's 1/35 scale Sherman Jumbo - a significantly up-armored Sherman tank designed to be at the head of advancing columns and function as an assault tank. Two hundred and fifty-four were built through the spring and summer of 1944 with the first batches hitting the European front in the fall of '44. All were initially armed with a 75mm gun. A number were later converted to the long barrel 76mm gun because it fired a more effective high-velocity anti-tank round. The Sherman Jumbos served through the end of the war in Europe.
Tamiya's kit dates back to 1987 and is based on Tamiya's standard M4A3 Sherman tank issued in the early 80s. Tamiya added a new larger turret, new armor plates for the upper hull sides, and a new glacis plate for the hull front. Unfortunately, they neglected to provide a new and much larger front transmission cover. Numerous reviews have also mentioned the turret shape and size are off, but I've yet to read/hear where it's off or by how much. I spent some time looking over book and interweb pics and the height of the turret might be a bit low. Maybe. I believe the Jumbo is out of production, but the originall M4A3 is still available. Not worry; new, more detailed and more complex Jumbos are available.
I've built a new transmission cover using the old cover as a foundation, then adding sheets and strips of Evergreen .040 plastic to beef it up. The turret height was raised with .030 strips of plastic between the upper and lower turret halves. Additional details were added to the hull and turret - basically anywhere you see white, copper wire, brass, or green putty. I also used a Dremel tool and a small dove-tail cutter to enhance the very prominent hull weld beads. The case transmission cover and the turret sides were coated with liquid glue (in sections) and stippled with a siff wire brush to replicate the cast texture of the real items. You can see the turret texture in the photo.
The pic shows the mocked up upper and lower hull components and the turret, three of the six bogie wheel assemblies (three more on the other side), the mantlet, and turned aluminum gun barrel. Painting next - any color you want as long as it's olive-by-God-drab.
Qs and Cs welcomed; no secrets here...
Here's another bit of ordnance - a WW II Japanese Type 97 Shinhoto Chi Ha Tank from Tamiya. 1/35 scale, all plastic, with flexible tracks. The kit dates back to the 80s. Fairly easy cleanup and assembly. Paashe VL airbrush and Tester's Model Master, et al, paints. Colored pencils for the paint chips, scratches, abrasions, etc. Reaper acrylics for the various oil, gas, dirt, and dust stains. Finished off with chalk pastels (old school). The base is a cutup, sanded, and stained oak plank from Home Depot. Name plate from a local trophy shop.
Now everyone can join in the fun in RC's Ordnance Category.
Qs and Cs welcomed.
By Treadhead Rad
I wanted to share a new campaign that I've just started:
Featuring a snap-fit modular design, MAV3RICK is a 3D printable kit that can be configured into a number of different vehicle variants:
Take a look, I'd love to know what you think.
Thanks for looking!
Who's Online 18 Members, 1 Anonymous, 125 Guests (See full list)