Jump to content
  • Optionally enter a message with your report.

    ×   Pasted as rich text.   Restore formatting

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Coffee Nerdery Beer
      Hi there all, I've decided to dive into the deep end with finally trying the scary world of OSL. 😄
       
      Feel I've lost the plot on this ... so any advice on how to proceed with this would be greatly appreciated! (Having fun, though, despite not knowing what the hell I'm doing. 😁)
       
      I'm including a "top down" view, which is where I'm most confuddled. That dark line down his arm which represents the shadow from the staff which sits between the source of light ... it just doesn't look right to me.  🤔
       
      So, I'm all ears for suggestions on improvements!
       
       


    • By lexomatic
      Bones 5
      WIP is where the work starts in this thread.
       
      Expansions
      Dark Depths: WIP SHOWOFF
      Dungeon Dwellers: WIP  SHOWOFF
      Brinewind: WIP SHOWOFF
      Brinewind Extras: WIP SHOWOFF
       
      Encounters
      Charnel Pit of the Ghoul Queen: WIP SHOWOFF
      Dwarf King's Crypt : WIP p4, 7-10 SHOWOFF
      Shadows of Ravenhome: WIP SHOWOFF
      Spiders of Emrith Kul: WIP SHOWOFF
       
      Add-ons
      Adventuring kids: WIP SHOWOFF
      Arakoth the Ancient: WIP SHOWOFF
      Handmaidens: WIP SHOWOFF
      Yog Sothoth: WIP SHOWOFF
      Maybe more I don't remember yet
       
      Starting with a dry fit of 19507 Spiders of Emrith Kul encounter set.
      Not sure what to do with those bodies in webs on the slot. Need to go back and look at the pics to see if I should cut them or see if I have a spare slotta base to stand them up.
      Backdrop is a black cardstock.

    • By Darcstaar
      I only saw one thread about crackle paste when I searched these forums.
       
      So, I’m going to share how it’s going for me.
       
      I started with washed and dried 1” and 2” Reaper Bases.
       
      I put this garbage on a 2 inch base first.

      Don’t buy it.  I got it at Hobby Lobby at the time because they were out of Folk Art.
       
      To be clear, this is Crackle Medium.
      It is meant to be painted on a primed or rough surface I guess, and painted thin. I put it on kind of thick.  It didn’t crackle at all!
       
      So, I got a tub of this stuff on Amazon.

      The directions state “put over a thin layer of PVA glue.”  Pfft, who has time for that extra step?
       
      Here is the result on a washed but otherwise un prepped set of bases.

      1 inch
       

      2 inch.
       
      Lousy!
      So, the surface needs something for crackle paste to work right.
       

      This is a 1” base with a thin layer of PVA glue.
       

      This is a 1” base with just hitting it with 220 grit sandpaper and washing it again.
       
      I also used the 2” base with dried crackle medium on it.  Not pictured.

      This is a 2” base covered in black brush on primer.

      Here is the result on the 2” base over dried crackle medium.  It was hard to get the stuff into a uniform layer, as the medium created a very hydrophobic surface, so the paste slides around too easy.
    • By Mark.Bright
      Hello 
       
        This is my first post really on forums.  I normally post on Facebook. My wife and I paint models alot of the time side by side. Whilst I prep our quarterly contest entry we worked on these Storm Giants...  About half way done.



    • By Cursed13
      Most of these aren't up to date and I've changed bits of them here and there since these, I'll be saving those shots for the finished product, but hopefully you enjoy the journey.


  • Who's Online   4 Members, 0 Anonymous, 31 Guests (See full list)

×
×
  • Create New...