Jump to content
Sign in to follow this  
SamuraiJack

Northvakt, a 3D printable viking village!

Recommended Posts

https://www.kickstarter.com/projects/3dlayeredscenery/northvakt-a-3d-printable-viking-village?ref=discovery_category_newest

 

Story

First and foremost, thank you for visiting my project page!

After the first project that I have launched through kickstarter (https://www.kickstarter.com/projects/3dlayeredscenery/3dlayeredscenery-medieval-township-tabletop-edition) , I have been able to invest in better equipment to continue to develop as a designer. This investment enabled me to create more natural shapes and sharper detail.

Support free models

Support free printing has been a guideline for this project, therefore every model has been designed to print without support and test printed to verify this. Some models do include easy removable custom supports.

The project of Northvakt!

The core pack of this kickstarter supplies a large number of models so that a fully-fledged viking village can be created right away, however with the unlocked stretch goals this village can only expand further and further!

The project can be subdivided in a village aspect, including buildings and several props, And a defense aspect, including the palisade walls.

What is included in this kickstarter ?

  • Six amazing buildings.
  • Twelve different fencing options.
  • Six prop stacks and all individual prop pieces.
  • Water well prop and a wanted board prop.
  • Four different trees.
  • two row board props.
  • Three directional posts.
 
  • Palisade straight wall, seamless inter-connectable . 
  • Palisade sharp inward corner wall, seamless inter-connectable . 
  • Palisade sharp outward corner wall, seamless inter-connectable . 
  • Palisade gatehouse, seamless inter-connectable . 
  • Palisade walkways for every wall.
  • Palisade ladders.

 A total of over 60 Stl-files, only to expand even more with unlocked stretch goals! 

I would like to show you the possibilities of this set with the diorama below.

This diorama has been created by Fredrik Lybeck, owner of the brand: Lybbans miniatures. His youtube channel can be found through the following link: https://www.youtube.com/channel/UCHDoIg6C0JwFffschmTq-iw/videos

afe4acf9bb7f52a9bd2f9e3cbc41d11c_origina Diorama
5055c654f34ae8336e27c8f8d4d30d29_origina Close up
9ff12841fcc0c396ab224b0b66d76ff3_origina Close up 2

The village of Northvakt

The village of Northvakt consist of a total of six different buildings with detailed exterior and interior from a reasonable small size, 14 centimeres wide, to a extremely large size of 45 centimeters wide. All buildings will be individually featured below.

Small viking house

349e8cfd000c73155800d8fa121d18e9_origina Small viking house

This small house will be used most likely by the less wealthy viking in the village.

Normal viking house

f855313195eed22e2fd1c7925e67ad42_origina Viking house

This viking house is a bit more luxurious compared to the small building, however it does not offer enough room for a whole family to live in.

Viking blacksmith building

8ebb02b045147409519aa054c32432e1_origina Viking blacksmith

The viking blacksmith has some more unique features to it, especially the boat-shaped overhang is something that makes this building stand out from the crowd.

Viking small countryhouse

508b4e08b4329e3c33aabaa327aa4dd7_origina Small viking countryhouse

What makes the country buildings unique compared to the other buildings is that their roofs extend further towards the ground. This makes it possible for vines to creep up on them, which happened to this building.

Viking large country-house

5f8a62b0b1bd593a38716d14524dcd9b_origina viking large countryhouse

This country-house is made with more 'natural' material as you can tell from the logs that still have most of their branches connected to them. This buildings offers space for a whole family and includes a fireplace inside.

Viking large countryhouse option 2

4c4e4112cf1c81a0620f44b840a96f39_origina large countryhouse option 2

The large country-house offers a second option which includes a large old tree which has grown into it.

Viking townhall/longhall

d719dd76f1deacaef82de0655b484d98_origina Viking Townhall/Longhall

Last but definitely not least, the largest building of the village, the viking townhall/longhall. This building is a staggering 45 centimeters wide and offers enough space for your whole village to feast!

 

  • Like 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      https://www.kickstarter.com/projects/awakenrealms/1897919106?ref=ek0vh3&token=dace0a50
       
      Story
      Welcome to Nemesis Lockdown draft page! Campaign is not yet live (currently planned for May / June), but you can see here some of the first information and leave your feedback! There will be gradually more and more stuff we will be sharing here, so you can check it out from time to time, but most importantly - click "Notify me on Launch" if you don't want to miss the campaign! 
      Nemesis Lockdown is first standalone expansion to Board Game hit - Nemesis (BGG rating #35 overall, #9 thematic). Lockdown will bring the same cinematic, thematic Sci-Fi horror feel to totally new setting: Base on Mars. It will come with lot of new, fresh ideas and content while keeping some of the core Nemesis mechanics that makes every play an unforgettable story to be told.
      Nemesis: Lockdown
      I should have known when they asked us to prepare the landing platform. There are only two reasons to make a night sample transfer. It’s either too urgent to wait, or it’s a black op. Both spell trouble.
      My survival instinct, honed by twenty years of work in the Sample-Return Receiving Facilities, was screaming, considering the rumours that reached even our remote site.
      Maybe if I bailed right there, I wouldn’t be crouching in a dark lab, sweaty palms clutching a scalpel, and this damned soft voice repeating over my head: “Containment Breach, Containment Breach…”
      Things only got bleaker when they told us there would be human BSL-5-ET subjects coming. Extra-terrestrial samples and living people don’t usually mix. They SHOULD NEVER mix. Something went really bad out there, and we got caught in it.
      When Martinsen and Sovich processed the first sample, I only caught a peek from behind the armored glass. There was one word on the container.
      “Nemesis.”
      I wasn’t there when the actual breach happened. There were screams over the intercom. The main power went out. Soon, I saw Martinsen and one of the human subjects running to me from the isolation ward elevator, as if the devil himself chased them. I’ve seen it for a split second, before they were caught. I’d rather take my chances with the devil, than with the thing that took them.
      Now, it’s been fifteen minutes since I last heard any shots. The pain in my mangled leg subsides. I get up and slowly make my way to one of the security stations. Am I the only one left? No, thank god! Sovich is still kicking. I have her on a live feed from the main terminal. She’s…
      Changing the logs! Switching her name for mine. Frigging rat! When the board learns we had a containment breach, there will be hell to pay, and she wants to make sure the bill is on my name.
      Now, she turns towards the main console. In the middle of it, under the protective glass, is the A3-5 button, a big chunk of red plastic. They told us it enables the “Code Red Emergency Protocol” but we had no clearance to know what the protocol actually is.
      Don’t do it, Sovich. You might just nuke us. Don’t…
      Of course she does. She wants to play the good girl, an upstanding citizen.
      Well, there’s still time to fix everything. No one will call until morning. We’re on a dark side of the planet now, blocking all signals. I need to get topside, to the secondary console in the other building. Re-write the logs, access the classified procedures, and see what new trouble she got us into.
      The only things between me and my salvation is a broken airlock, a long stretch of hellish surface, and enough gamma radiation to hard-boil an egg. I’m betting these things can’t walk outside.
      That would be too frigging unfair...
    • By SamuraiJack
      https://www.kickstarter.com/projects/initiativerod/the-legendary-rod-of-initiative?ref=discovery_category_newest
       
      Story
      Brothers Forged Campaign Supplies is a small business formed from the fellowship of an adventuring party. We have collectively been playing Dungeons & Dragons since the '80s. Now, with our diverse skill set, and months of building and testing prototypes we are prepared to create and launch this project.
      "Roll Initiative!"
      Two of the most exciting words to hear (or speak) in an adventure. But tracking initiative can be a major distraction from the action unfolding. Brothers Forged have tried many methods to keep players immersed during this process. None to our satisfaction. Until now.
      The world is untamed and wild regions abound. Monsters could be hiding around every corner, and sometimes they show themselves when you least expect it. And when they join combat in a later round, adding them to your initiative tracker can be a distraction from the gaming experience. When they are killed, removing them from the tracker is yet another interruption. Finally there is an easy way to add and remove creatures and enemies quickly and easily. With handcrafted wooden dry-erase compatible nameplates - that affix themselves to the tracker via the power of magnetism - it's incredibly easy to create space and shuffle the initiative order about while maintaining the immersion that makes Tabletop Role Playing Games (TTRPGs) so much fun.
      Behold, the power of magnetism! (actual tracker not self-assembling) The Legendary Rod of Initiative has vastly improved our gaming experience and now we want it to improve yours as well!
      How We're Going to Make It Happen
      Like a wizard preparing spell components for conjuration in a later battle, we have been building, testing, and revising the Legendary Rod of Initiative, at last conjuring it into creation in its current incantation. We have searched the shops of many towns and villages to gather all of the components and sourced the raw materials needed to scale production in order to deliver the Legendary Rod to the gaming community at large. The forge has been ignited, and the Brothers are ready to begin production.
      Right now, we need your help raising the gems, gold and silver coins needed to begin manufacturing. The funds raised by this campaign will be used to purchase the necessary components, keep the forge lit, manufacture, and ultimately deliver the Legendary Rod of Initiative across the realms!
      Pledge Rewards
      An original PDF adventure created by Brothers Forged. Delve into the lair of a unique dragon that possesses the power of magnetism and attempt to recover the Legendary Rod of Initiative -  a powerful magickal artifact.
      Includes maps, pre-generated characters, and the necessary information to GM and play the epic adventure. Based on 5e ruleset, recommended for 4-5 players, levels 5-10.
      Take your quest to new heights and play your character with more confidence! Track your initiative with a custom nameplate laser etched with your character's name (or a monster, or NPC, or BBEG, or your favourite animal companion's name). Built with the same awesome magnetic force that makes your party's Legendary Rod of Initiative so magickal. Up to two lines of text, 10-12 character limit per line.
      Actual nameplates will vary from those shown above.  A custom designed limited edition t-shirt featuring your choice from the evil dragon trifecta - red dragon, green dragon or blue dragon.
      Close-up of dragon artwork. All shirts will be black in color, with various sizes available. If your pledge includes this reward let us know your size and dragon colour in the Backer Survey after the campaign.
      Pledge for this reward tier and you'll get:
      1 Limited Edition Dragon T-shirt (your choice of dragon colour - red, green or blue) Quest for the Rod of Initiative (PDF) The original Brothers Forged Hex Dragon Dice Chest, available in Rustic Maple (stained a dark brown), Natural Maple, or Red Oak. Each chest is crafted from domestically sourced hardwoods, emblazoned with the head of a furious dragon. We use a beautiful oil finish that feels great in your hands. Each chest's interior has enough room for a set of 7+ standard polyhedral dice and includes a special hexagonal enclosure to keep your precious d20s separate. Plus, each chest includes a bonus 20-sided die for free!
      Examples of Hex Dice Chest finishes (dice shown, not included). Three different finishes available - your choice! Keep those dice safe; the dragon is on the outside guarding them for you!   Don't leave your dice's luck to chance, 6 strong magnets and innovative inset lip ensure each half is securely fastened shut to keep your dice, and your luck, as safe as can be. These will look awesome at your table during your next session.
       Pledge for this reward tier and you'll get:
      1 Hex Dragon Dice Chest (your choice of finish - Rustic Maple, Natural Maple, Red Oak) Bonus d20 die! Quest for the Rod of Initiative (PDF) You've waited your entire gaming life for this - an easy way to track initiative on the fly. Be ready for anything with the Legendary Rod of Initiative from Brothers Forged.
      The Legendary Rod of Initiative in all its glory.  
    • By Inarah
      Young artist, first Kickstarter project. Seems to be well planned. 
       

       
      https://www.kickstarter.com/projects/mashafalkov/riders-on-the-worm?ref=user_menu
       
      "The goal of this campaign is to fund the printing of high-quality stickers that are both UV resistant and waterproof.  Each sticker will be 4" x 4" - large enough to enjoy the smaller details in the artwork, printed on waterproof and UV-resistant 4mm vinyl."
       
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/aleda/gothic-graveyard?ref=discovery_category_newest
       
      Story
      Hello and welcome to “Gothic Graveyard”. It's a collection consists of a series of stl printable files inherent to the medieval/gothic theme. All buildings, terrains, pieces, etc. Are designed for 28/32 mm tabletop games. The main objective is to make printing quick and easy to assemble, absence of supports, fun to paint and with the possibility to change the diorama whenever you want. The collection was designed for fdm printers, but nothing prevents resin printing.
      The project was conceived and developed to be printed at home with your 3D printer following and having as main reference three simple rules:
      • the modularity
      • the speed of realization and assembly through the use of simple magnets and glue
      • the absence of supports for printing
        STL LIST
      The models of the large mausoleum and the perimeter walls are perfected in two types, one constructive and one ruined to give you the freedom to alternate / use the ones you believe in best.
       
  • Who's Online   31 Members, 2 Anonymous, 41 Guests (See full list)

×
×
  • Create New...