Jump to content

Recommended Posts

So to wrap up one of my 2020 goals, I figured I would start on actually *gasp* painting a Sophie! I have no less than 3 in my stash, and I figured I would start practicing some concepts from all of my learning while I was at it..

 

I decided to pick the ReaperCon 2017 Sophie and since she has somewhat of an aquatic theme to her, I am going to shamelessly "borrow" some ideas from Disney...because why not...

 

Disney HD Wallpapers: The Little Mermaid HD Wallpapers

 

 

I did my usual priming routine but -THIS TIME- I added an additional directional light to reinforce a direction.

 

Also, I have turned back to inks for some foundation work. This time incorporating Sepia, Orange, and Yellow for the wings. Glazing over the transitions established by the airbrush to set the initial values and tones.

 

20200314_192607.thumb.jpg.65ac5b522c81c5cfc3df4d97718f102e.jpg

 

I followed up by using Reaper Burgundy Wine, Tanned Flesh and Fair Skin for the skin tones, including a bit of FW White Ink to lighten up the brightest highlights. I used Kimera Kolors magenta + White Ink and hit her lips. I might come back with a bit brighter color to hit the lip gloss sheen.

 

I still need to work on blending the transitions between light and dark areas, and as well as obviously hit the arms and legs more.

 

20200314_210937.thumb.jpg.73158537a7404207c096f92f0b950c35.jpg

 

 

I also wanted to capture "Ariel's" aqua-emerald eyes. and I am REALLY happy how they came up this time. It doesn't hurt that this sculpt did a very good job of sculpting the eye area. So super-duper zoom to see the tiny eyes.

579009335_20200314_210937(1).jpg.700ec057ebf9b4a91a317818a6b57db1.jpg

Edited by Al Capwn
  • Like 13
Link to post
Share on other sites
  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Took some time today to block in a few more colors:

  • Coated her hair beads, scales, and her pet are coated with FW Turquoise Ink.
  • Her necklace and conch shell in her hair are Citadel Screaming Skull.
  • For her top, I went with Scale75 Inktense Violet, with a combination of some FW White Ink.
  • Her flower is Kimera Kolors Magenta, and both her lips and flower with highlighted with Magenta + FW White Ink.
  • Her bottle and skirt are Kimera Kolors Pthalo Green, with the highlights adding Kimera Kolors Cool Yellow.
  • Her teddy bear is similar to her wings, basically FW Sepia + FW Orange.

20200315_130531.thumb.jpg.3ca144c4d6bafd29594efc3ca411dea2.jpg

 

20200315_125638.thumb.jpg.440139e3db720293966acac6a00b493a.jpg

 

Edit: Pushed her hair tone more towards red by glazing in some Kimera Red Oxide + Red. Painted up the base a bit with some brown and green tones, and glued her down - although she will need some help here to keep her to stick. Worked in some the yellows into the sea creatures fins. Reinforced the wings a bit of white ink + sepia + orange. I will probably end up having to pull her back off to paint the other side of the sea creature's face - but I needed to add a bit of putty under one of her feet to keep her from having floating foot syndrome.

20200315_175921.thumb.jpg.9dcb7b4972f689b52fa2685e1008ac0f.jpg

 

Edited by Al Capwn
  • Like 11
Link to post
Share on other sites

Tonight was adding some more colors to "Flounder" which, I am keeping some of the same tones but muting them a bit as to not take too much away from Sophie. I added a bit of Pthalo Green to the FW Turquoise Ink to his head and gill area.

 

20200316_205624.thumb.jpg.2f8dea7809b071ab9ca969d717f8959d.jpg20200316_205635.thumb.jpg.22d05147f768e9dceef94c7ad5430416.jpg

 

20200316_205505.jpg.9efd773714ef2367abc56dc6017aef46.jpg

 

Added in some purples into his fins, and worked on basecoating his teeth - still trying to decide what to do with his huge bug-eyes.

  • Like 12
Link to post
Share on other sites

3/22 - Painting with a cold...

 

No, no COVID-19 for me, but still fighting off a cold. Managed to muster up enough energy tonight to put in a bit more work. There are a few areas that I have touched up with primer since there are a few areas where the paint rubbed off that I will have to come back and finish up. Added some more magenta to the hair, but will need to blend it a little more.

 

20200322_200840.thumb.jpg.df444832d0335dd0d86f996f7b809ac7.jpg

 

20200322_200854.thumb.jpg.0276799f3b500d012f05b157e4f510b4.jpg

20200322_200905.thumb.jpg.3e13d79ee7fcf6887519d1b6bf06b7b6.jpg

20200322_200918.thumb.jpg.ed8c56980ab29e91831ec90fb1f251f4.jpg

 

 

  • Like 9
Link to post
Share on other sites

3/25 - Touch ups and spear

 

So lots of little things were done.

  • Blocked in the spear, and shaded the spear point with a bit of Scale75 Inktense Blue+Black.
  • Added another glaze of sepia + orange to the wings to bring it down from the yellow and more into the leathery brown spectrum. Added another sepia glaze into the shadows to darken them up to compensate a bit. Added more orange + white + sepia in the spines of the wings, especially the top-most ones leading towards her face.
  • Touched up the teddy bear; coloring in the button eyes and highlighting the stiching.
  • Added additional edge highlighting to some of the dress scales to give it a bit more pop.
  • Used 2:1 Vallejo Metal Color Gold/Copper + 1 drop of FW Orange ink to make a nice warm gold. Put that on the shoulder pauldron, and glazed some sepia ink into the shadows.
  • Added in some Scale Inktense Violet to increase the saturation of the purple top, and added a touch of Kimera Magenta to push it more towards a warm purple.
  • Glazed her hair (again) with a thin Magenta, then added a tiiiiiiiny sprinkle of white to add in the hair reflection line.

 

 

20200325_184507.thumb.jpg.577426097e492216aae66b38d30b1ff2.jpg

 

20200325_184619.thumb.jpg.98632ad579238b3bc3f59b547f9caa6a.jpg

  • Like 11
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Lostraven
      This is Inn Keeper Sophie from the Bones 4 Core, Sophie and Friends subset and was sculpted by Gene Van Horne. It was #160 in the set but is now available as SKU: 77750.
       
       




    • By SparrowMarie
      Pretty happy with this. It's the first metal anything that I've successfully painted so also pretty proud about that.
       
      Extremely happy with her face. Might go back and touch-up a few spots. C&C welcome.
       

    • By GodOfCheese
      This miniature had some DRAMA associated with it.
       
      I painted her for quite a while, and then she went into a kind of miniature limbo in which I just couldn't stand any color on the sculpt.  Finally I ended up dunking her in the Simple Green and leaving her there for a week.  The paint came off, but strangely the bones sculpt was dyed a strange orange color and its texture changed.  It got really, really soft... almost floppy.
       
      ...but eventually I got the fig to take a brown basecoat, and the rest of the painting process went off without much of a hitch, except the OSL.  The figure was so weirdly soft that drybrushing made it wobble.  So her OSL is a lot lighter than I would have hoped.
       
      Anyway, here she is :-)
       
       
       
       



    • By HolkDiggity
      This one was for a facebook competition about color. The rules were, basically, don't worry about anything else but color. Do something different with color. I started with the idea of a dress palette of blue, teal, purple, and magenta. Once I had those colors in place, it was a matter of incorporating them in different areas of the model. I went with cotton candy roses and a galaxy print on the wings. The galaxy was a matter of stippling the dress colors (plus a bit of white) back and forth until the effect was convincing. Then I masked the body of the model and flicked a stiff brush at the wings to make star patterns. I then went back to the dress colors and stippling to blend them in a bit. This was a blast to paint, because I've never really done anything like this before.




    • By Al Capwn
      As part of my goals for this year, one of them was to actually paint a Sophie - so here is my version of the 2017 ReaperCon Sophie. She was fun to paint, but was she fiddly to put together and I had to fight paint chipping all the way through. Next time I will remember to give the model a good wash before priming! You can click on the pictures for the larger versions, and one day I will invest in a tripod and get the exposure settings dialed in properly as well!
       
      For those interested, the WIP thread is located over here.
       

       



       
  • Who's Online   15 Members, 1 Anonymous, 30 Guests (See full list)

×
×
  • Create New...