Jump to content

Recommended Posts

or as those Texans keep spelling it, "Griffon". (Texans are lovely people, I wouldn't dream of antagonizing them over their simpleton spelling. These folks have guns. I mean, not even the more common "Griffin"...)

 

I went with the African Bateleur Eagle, as it has a striking black, white and red colouration with large creamy panels on the top of the wings. The back bit is just a generic big cat, with reddish brown hairy bits to balance all the red on the front.

200324-reaper-bones-4-core-set-82-griffi 200324-reaper-bones-4-core-set-82-griffi 200324-reaper-bones-4-core-set-82-griffi 200324-reaper-bones-4-core-set-82-griffi 200324-reaper-bones-4-core-set-82-griffi 200324-reaper-bones-4-core-set-82-griffi

This model is made in regular 3rd generation Bones plastic. Which in spite of being much more rigid than earlier Bonesium, is not nearly strong enough to hold any weight in awkward positions over time. If one of its front talons had been sculpted touching the base in some way, this would probably not have been a problem. As it was the talon was involuntarily touching the rim of the base anyway together with the wingtip dragging along the ground. This was discovered and fixed some time ago, and I forgot to take any pictures of the listin' gryphon.

Anyway, since it drooped quite a bit after just standing around on the shelf, it was nessecary to brace it. I did this by drilling up into the leg and inserting a 1mm diameter metal rod (I used a part of a paperclip for this) to make it stand up properly and discourage further drooping. The pin goes up into the hip or so from beneath the base. This fix has now held in the several months since I fixed it.

200324-reaper-bones-4-core-set-82-griffi

A long time being exposed to the enormous monsters from Warhammer has skewed my size perception. For some reason I have been thinking about this gryphon as "the small one".

 

Drybrushed from a black undercoat. Yeah, it is a bit rough in places, but perfectly serviceable.

 

 

#82 The "Griffon" 

Bones 4 Core set, 2019

Reaper Miniatures

unknown sculptor

Made in Bonesium PVC

50mm base.

should be available from reapermini.com some time in the future in Bones.

Edited by Maledrakh
  • Like 18
Link to post
Share on other sites
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By RogaDanar
      This week has been a week of experimentation. I tried my first NMM this week and my first attempt at actually shading hair rather than just dry brushing it like I have forever.
      I still have free time, so I have been able to keep the production level up. My players will be starting a new adventure soon, and I need a whole new set of monsters. Oh gee, how sad, I have a 
      bunch of new minis that I "have to paint" (He says to his wife). 
       
      Centaur
      The week did not start out well. I was cleaning up the mold lines on this bones centaur (which are not conveniently placed) and I almost cut off his nose. This is not a figure that I was particularly excited about so I just slapped together  a paint job and moved on. No fixing that nose. Tried to make the base pretty though.
       
       
      Brigands
      Just like last week, I painted the bones brigands (one more set to go). These were intended more as practice faces and a little NMM on the guy on the left and the ax. I think it didn't come out too bad. and the faces are characterful. These guys will be the random ruffians/bandits that get thrown on the table now and then. 
       

       
      Aeowyn Silverwood
      I had a little success with the face on this one. I also tried to do some shading on the hair. Only after I started did I read that black hair is actually a little tricky to highlight. This was a start. 
      I planned on NMM here but chickened out and moved on. 

       
      Nalani, Dancing girl
      Working on skin tones and hair highlights on this one too. The metallics here are so small that I didn't even try NMM. I feel like the highlighting on the hair and the dress came out well.
       

       
      Nemesra, Dancing girl
      This one was an attempt at translucent clothing on the legs.

       
      Townsfolk V Grandmother
      The face came out as surprise, but that works for me.

       
      Nolzurs Griffin
      Just a fun figure to paint.

       
      Humblewood owl
      Here is the owl knight from Hit Point Press's Humblewood setting. This one is the best of this week I think and he's also adorable. Big shout out to Wickedshifty who I copied for this mini. They did the NMM that I wanted to try and did it so well that I had to copy it just for practice. The front came out good, but the helmet on the back is not quite right. This has given me some confidence for more experimentation. I will probably look around for a mini that is really shiny to try it out on.
       
       .
       
      I doubt that I can keep this level of production up as I am trying to push my level of painting up a bit. But I am making a big dent in my pile of mini's. Let's see what happens next week.
       
       
    • By Maledrakh
      I have been slightly less of a workaholic in May than in April, so I have been able to do some quartely challenges as well as the monthlies. I am probably not going to be able to paint anything else this month, so here goes.
      These were all painted for the Reaper challenge league May, and again, squeezed in between work. So, low effort speed painting is the key. which also shows that is it possible to get quite decent results in a short time as long as you accept there will be some rough bits.
       
      there are some pictures below
       
    • By Maledrakh
      At the Twee of Wuv
       

       
      A simple diorama for the Reaper Challenge League
       
      44131 Tree of Despair with the 77546 Barbarian Mouslings
  • Who's Online   7 Members, 0 Anonymous, 32 Guests (See full list)

×
×
  • Create New...