Jump to content
Sign in to follow this  
SisterMaryNapalm

Let's make ... Kauder got this - (Another WWII diorama project)

Recommended Posts

Yes! We can do it again! Let's make a tank! Let's make a beautiful tank!

 

Once again, it's a diorama project based on a game scene, once again, it's Combat Mission.

 

In this particular diorama, the commander of a Panzer III M is a reallylucky  person. In a shootout during the Let's Play of German wargaming channel "TaktikfuchsTV", his Panzer III got hit around 20-25 times, prompting everyone to believe that this particular tank was dead. And I mean ... DEAD!

 

But to everyone's surprise, the crew reentered the vehicle and drove away - going like:

 

hDEF356C0

 

 

Here's the scene:

 

Kauder reenters his tank (In German)

 

So I got me a commanders figure and a tank ...

 

First off, some pictures to see what this project will look like:

 

jykm-3o6-f535.jpg

 

jykm-3o7-fd12.jpg

 

jykm-3o3-a2ef.jpg

 

jykm-3o4-9d59.jpg

 

jykm-3o5-fe65.jpg

 

jykm-3o1-5abd.jpg

 

jykm-3o2-c6ce.jpg

 

So I got me a Panzer III from Tamiya and started to do some minor conversions ... and over the course of one afternoon, this vehicle was finished.

 

jykm-3og-aeb7.jpg

 

jykm-3of-f9a8.jpg

 

I am really proud of those selfmade smoke launchers.

 

jykm-3oe-9189.jpg

 

jykm-3od-a675.jpg

 

The vehicle will be displayed with open hatches. That's a challenge due to the really lame interior, but that's not a problem. I'll use colors to make the less detailed parts dark and the detailed parts white - I hope that will work!

 

Tomorrow I'll go over the armor and do the shell damages. The only thing I am not certain about is the frontal armor provided by the spare tracks.

I don't know how those look when they are hit. They are pretty massive and I simply cannot imagine them looking the same way as a normal armor plate when hit.

 

I've got to dig deeper into it.

  • Like 14

Share this post


Link to post
Share on other sites

PZKFW III is a beautiful panzer.

I have always liked the look of that one.

  • Like 2

Share this post


Link to post
Share on other sites

Let's continue ...

 

After creating some hit damage to the front of the vehicle, sticking close to the pictures, the vehicle was ready for priming:

 

jykm-3oj-2d55.jpg

 

jykm-3ok-27d4.jpg

 

jykm-3oi-e9d2.jpg

 

... and using a grey primer to unify all the hits and ricochet damage, we are now ready to continue applying the red primer and then the sand color!

 

jykm-3oh-554a.jpg

 

jykm-3om-087e.jpg

 

jykm-3ol-7001.jpg

 

jykm-3oo-a5d7.jpg

 

jykm-3on-7396.jpg

 

Stay tuned.

  • Like 12

Share this post


Link to post
Share on other sites

So far, so good...

 

Outside of the gun breech, Tamiya doesn't normally include interiors in closed top AFVs. They leave that for the aftermarket.

 

Not sure how far you're going with this, but drill out the MG barrels if you haven't done so. I can't tell.

 

Turret-mounted smoke mortars seem to have been rare on this variant, but weren't completely unknown. They were more common on the Ausf M, the short barreled Ausf  N, and Ausf K command tanks. If you want to go nuts, add the cable leads (thin copper wire) at the back of the mortar barrels, twist them together, and insert the three into the turret right behind the mount.

 

Add the lead (also thin copper wire) from the fender Notek lamp base out to the edge of the fender, then down into hull plate. Again, not sure how far you're going...

 

The tight shot patterns indicate a derelict vehicle being used as target practice by the other side. The hits on the track links would likely have severed the track pin(s) and forced the links up and apart.

 

'Sand' indicates North Africa?

 

Waiting for more!

 

 

  • Like 5

Share this post


Link to post
Share on other sites

Thank you for your comment, Glen,

 

2 hours ago, GlenP said:

So far, so good...

 

Outside of the gun breech, Tamiya doesn't normally include interiors in closed top AFVs. They leave that for the aftermarket.

 

I know. I already assembled Tamiya models, but as this particular model was asked to be opened to see the interior by the one who requested it, I'll leave it as it is and display the interior as quoted here:

 

"The vehicle will be displayed with open hatches. That's a challenge due to the really lame interior, but that's not a problem. I'll use colors to make the less detailed parts dark and the detailed parts white - I hope that will work!"

 

Quote

 

Not sure how far you're going with this, but drill out the MG barrels if you haven't done so.

 

This is common practice on my models. (Though I refrain from it on tabletop models, as I learned that drilling equipment there often leads to bending and breaking when used quite often)

 

Quote

 

Turret-mounted smoke mortars seem to have been rare on this variant, but weren't completely unknown. They were more common on the Ausf M, the short barreled Ausf  N, and Ausf K command tanks.

 

This is a PzKpfw III Ausführung M, as stated by both the game and the text above, though it lacks the Tief-Wat-Einrichtung, the wading muffler, and seems to be a conversion of a Panzer III L, equipped with a Panzer III M turret. I took the pictures from the game as my reference.

 

Quote

 

 

 

If you want to go nuts, add the cable leads (thin copper wire) at the back of the mortar barrels, twist them together, and insert the three into the turret right behind the mount.

 

Quote

 

Add the lead (also thin copper wire) from the fender Notek lamp base out to the edge of the fender, then down into hull plate. Again, not sure how far you're going...

 

As this is an unpaid "commission" and I have been asked to do it as simple as possible (and I don't think the "customer" will ever care for it), I decided not to do it.

 

Quote

 

The tight shot patterns indicate a derelict vehicle being used as target practice by the other side. The hits on the track links would likely have severed the track pin(s) and forced the links up and apart.

 

'Sand' indicates North Africa?

 

Nope. As stated in the first post, this is from a fight sequence in a game (which is the reason it's called "Kauder got this" - English for: "Kauder regelt"). After being hit like 20-25 times, the crew reentered the vehicle and drove away, much to the amusement of the streamer and his audience (please check the video link in the first post for the whole sequence).

 

The scenario is from Paul Conrath's counterattack on the Gela bridgehead in Italy in 1943.

 

Quote

Waiting for more!

 

The tank is finished - but I want to finish the Panther I work on as well before I continue painting both.

Edited by SisterMaryNapalm
  • Like 6

Share this post


Link to post
Share on other sites

Ah, I get it now. I found the Ausf M above. I've built Tam's Pzkpfw III Ausf L myself - eastern front Panzer Grey. Basically out of the box + 10%. What Panther are you working on?

  • Like 2

Share this post


Link to post
Share on other sites

Working on the Panzers interior.

 

jykm-3py-1ab5.jpg

 

 

 

And the commander is ready to be painted - therefore: a little test how everything would work together.

 

jykm-3po-fda3.jpg

 

jykm-3pp-9c37.jpg

 

 

  • Like 9

Share this post


Link to post
Share on other sites

I have always liked the looks of the Panzer 3 and this one looks especially classy.

  • Like 4

Share this post


Link to post
Share on other sites
11 hours ago, Corsair said:

I have always liked the looks of the Panzer 3 and this one looks especially classy.

 

I am more the fan of the later PzKpfw IV models like the Panzer IV H, but the Panzer III is THE visual "reference" for early and mid-war German armored divisions.

 

I am glad you like it.

  • Like 4

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Dan S
      Dan's Build Journal #3
      Dank Sewers
       
       
       Latest WIP Picture:
       
        My Other Build Journals:
       
       
      First off the elephant in the room.  I appreciate I have literally just started 'Build Journal #2 - Ancient Ruins' which has only had one post so far, unfortunately that's had to go on temporary hold.  My last piece of foamboard isn't quite big enough to support the planned build and I do not have anything else strong enough to hold it and so I've had to order some.
       
      Rather than waste my last weekend off work, I figured I'd start work on one of my smaller quicker builds which should keep me occupied until the foamboard arrives.  This ones going to be a photo backdrop of a dark, dirty, fantasy sewer system.
       
      Preparing the Masonry
      For this build I am going to be using 'Hirst Arts Mold #343 - Underground Brick' and casting the blocks from Dental Stone which is a lot more durable than plaster.  Luckily I had prepared a large batch of these blocks at the same time I was making blocks for my Ancient Ruins build and so I was ready to go straight away.  The first job was creating a back wall for the project, which took around an hour to both experiment and dry-fit something I was happy with and then glue it all together.  At present the wall has some pretty obvious and unsightly 'seam lines' where you can tell it is just a bunch of blocks glued together, that will be fixed later.
       
       
       
      Laying the Foundation
       
      For the foundation I used a sheet of 6mm foamcore, which I then cut to the length of the wall.  I then measured and cut a block of polystyrene using a hotwire tool which will serve as the walkway above the sewage water.  I glued a second piece of foamcore (this was the offcut from the first piece I had cut to size) and glued that to the back, this is to give the wall a bit more support once glued to the base.  I quickly tested the fit (but didn't yet glue the wall to the base)
       

       
       
      Preparing the Walkway
       
      The walkway was made out of Sculpy, a modelling clay that needs baking to harden.  I used a Greenstuff World texture roller to imprint a stone brick floor pattern into the clay, test fitted it to the polystyrene and then cut it to the right size.  The flooring was then baked and glued to the polystyrene once cooled (This shrunk slightly in the oven, if you look at the next picture the wall slightly overhands the path now).  I added a brick wall against the the polystyrene where the water will eventually flow, but the height was just off, to fix this I glued some old foam bricks I had laying around to the edge.  These are a lot bigger than the bricks of the wall and floor, however as edging pieces they seem to work well, I textured these with a scumpled up ball of tinfoil.  Finally I attempted to fill the gaps and seamlines where the blocks meet with some home made spackle.  I rubbed dry powdered plaster into all the gaps and then used a soft haired makeup brush to gently dust away the excess which had gathered and filled in the detail of the brick work, once cleaned up I spritzed the entire thing with water to soak into the cracks and dried plaster.  I may need to do this a second time, but its already looking a lot better. 
       

       
      Creating the Waterway.
       
      To finish up the waterway, I built another wall section and placed it a few inches out from the first, I then cut away the excess foamboard to keep the build neat and compact.  As the clay floor I'd made ended up a little uneven in places, the back wall no longer sat flat and there were gaps as a result, especially under the final buttress (not that obvious at the angle I photographed it above, but it was quite a large gap).  I ended up filing all these gaps with some sculptamold, I also made some small debris piles around a few of the buttresses.  To finish off the whole model was primed white ready for painting.
       

       
       
       
    • By Dan S
      Dan's Build Journal #1
      Halfling/Hobbit Hole
       
       
      Completed Project Photos:
       
       My Other Build Journals:
       
       
      Greetings all!
       
      I recently undertook the task of creating several display pieces to serve as scenic backdrops when photographing my miniatures, however being the procrastinator that I am, I have instead found myself with an ever growing pile of unfinished projects.  In an effort to break this cycle I am no longer allowing myself to start new projects until my current one is complete. I figure a progress journal would be a great way to hold myself accountable, and hopefully by sharing my build process even inspire others into giving diorama building a try.
       
      Anyway, without further ado here is my current work in progress, a good old fashioned hobbit hole.  I managed to pick up a cheap and incomplete resin kit (front wall and chimney) on Ebay a while back.  I painted it about a month ago, and it has sat on my desk gathering dust ever since.  Today I finally started to put in some real work on the build.
       
      29/05/20  -  Laying the foundation.
       
      The first job was to lay the foundations of the build.  I hot glued thick polystyrene sheets to an old photo frame and then cut them to shape using a hot wire cutter.  The challenging part was then getting the front wall to fit convincingly into the hill, being an incomplete kit, the front wall was completely rectangular and just didn't look right no matter how I positioned it. To fix this, I measured out and then cut some thick card stock in to triangular sections, and then cut some thinner strips to match the wooden beams on the front of the house.  I then glued these to the house so that the walls now followed the contours of the hill more organically.  I also made some curtains using some old fabric (The original kit has holes for windows and I needed to hide the polystyrene behind them).
       
      Next I mixed up some Sculptamold and started to cover the polystyrene and base of the picture frame before adding some rocks that I had cast previously with Plaster of Paris (They are probably hard to make out in the photo, as they blend in with the white sculptamold, but once painted they should stand out nicely).  With that done I decided to call it a day, and give the sculptamold the night to fully dry before adding any paint.  And that is pretty much how I spent my Friday afternoon.
       
      Apologies for the poor picture quality, I took the photo during the evening in poor lighting with my ancient phone camera.  I'll get some better pictures up once I have something more substantial to share.
       

    • By Dan S
      Dan's Build Journal #2
      Ruined Keep Edition
       
      Latest WIP Shot:
       
      My Other Build Journals:
       
      For those who followed my Halfling/Hobbit home build journal (Link here), you will know that I recently set myself the goal of building a series of display pieces throughout the year, to serve as scenic backdrops when photographing my miniatures.  Maintaining a build journal is my way of holding myself to account (I have a bad habit of starting and not finishing things). I took a short break following my last build to catch up on some unpainted miniatures, but I am now ready to get cracking on my next large project, an ancient ruin.
       
      Future planned projects include:
       
      Sewers Dungeon Adventurers Camp Industrial Complex Spaceship Graveyard Urban Trenches  
      With the Ancient Ruined Keep project looking to be the most complicated of bunch I have chosen to start that now, as I will be returning to work in a week or so and will no longer have a lot of free time, however after this project I have no set order planned, so if anyone has a preference as to what I should start next then I am happy to accommodate.
       
      Stage 1 - Casting the stonework.
       
      For this project I am going to be using 'Hirst Arts' blocks.  For those unfamiliar with Bruce Hirst he produces silicone molds that can be used to cast a wide range of highly detailed modular terrain blocks which can be glued together in endless configurations and designs.  The molds I will be using in this project are #704 and #708 (ignore the 3rd mould in the picture, I mixed up too much stone and so filled another none related mould to set aside for a future project as to not waste it).  In my last build journal I used Plaster of Paris to cast the small rockface, this time because of the size and potential weight of the build I opted for Dental Stone which is similar to Plaster but sets harder and is much more durable.
       
      I suspect given the size of the project, it is going to take me at least a day or two to finish casting enough blocks, so here are a few screen shots of the blocks to give you an idea of what I will be working with (its basically glorified stone lego for diorama builders ).
       
       


    • By Thrym
      We all keep knick knacks and trinkets to make things from in the future.  Whether it's some small bit, like dragon pendant I got from Salvation Army for 50 cents or some cardboard forms that hold tech devices in place that look like good buildings for Battletech.
       
      I wrote about Bottlecaps as bases a while ago.
       
      Recently, I found the plastic mounting bracket that's been floating around my bench and figured out what I wanted to start making.  I usually draw out what I intend to do, but the shape of the bracket defined its purpose.
       
      This compilation uses a bunch of various finds.  So towards that end, I am going to have a little contest.  
       
      Guess all of the items which I used in here and you will get a random Bones mini.  I will provide a numbered list and one clue because one SET is fairly hard to figure out.
       
      1. ______
      2. ______
      3. ______
      4. ______
      5. ______ Bracket
       
      Clue:  These odd pieces were disassembled from a triangular cap.
       

       
      The bricks are actual brick I bought off of Wish.  I got the standard bricks plus the square in gray and brick red.  I also have small triangles in brick red.
       
      The stone was split length wise so it was nice and flat. The terrain is a custom grind of bark, black walnut bark, dark cork and and coarse normal cork.
       
      The gears are from Michael's jewelry and findings section.  Some of the white on the terrain is baking soda mixed with super glue.
       
      Here's the piece primed...
       

       
      Stay tuned and enjoy.
       
    • By Green Eyed Monster
      Today marks the 76th Anniversary of what has been dubbed "The Longest Day", when the push to liberate Europe from NAZI Oppression and predation set foot on the beaches of Normandy, France.
      Please keep all the brave men [and the corp of Nurses who didn't have to but volunteered anyway] who sacrificed so much for all of us in that and the subsequent days and months.
      GEM
      Proud to be a US Navy Veteran
  • Who's Online   10 Members, 0 Anonymous, 40 Guests (See full list)

×
×
  • Create New...