Jump to content
Sign in to follow this  
SamuraiJack

Aquatic Collection : 3D Printable Sculptures

Recommended Posts

https://www.kickstarter.com/projects/m3dm/aquatic-collection-3d-printable-sculptures?ref=discovery_category_newest

 

Story

Hello everyone!

This collection of models is all aquatic themed. There are minis, monsters, and scatter terrain. There are 12 models in the cores set, and 18 stretch goals planned. That is up to 30 models with a buy-all price of $6. Times are tough right now, so I wanted to make something affordable that is still just as awesome.

721da73b878ec95f9ed65ad4a74a1b7b_origina
dfdaff60eb5d25259e967eaa69358645_origina

 MODEL OPTIONS 

All models come with a no base, simple base, and decorative base option. A $10 pledge gets you all 3 versions in addition to the successfully tested resin pre-supported version.

93a4a6e403bd81c42c85b9179a7c71b2_origina
 

 THE CORE SET 

e44fc85615e2912dc33fb90f72bc421e_origina
 

                      THE STRETCH GOALS

Every $500 is a new mini, monster, or piece of scatter terrain. All mounts will have a saddle and no saddle version. More stretch goals will be added to match the funding level. So feel free to leave comments about what else you'd like to see!

8d3590be2de55d3f6a4e89f5ed8583b1_origina
 

 

  • Like 3

Share this post


Link to post
Share on other sites

Sounds like a nice attitude, I jumped in. I mean really, you can blow $6 on a bad lunch!

  • Like 2

Share this post


Link to post
Share on other sites
14 hours ago, Corsair said:

Sounds like a nice attitude, I jumped in. I mean really, you can blow $6 on a bad lunch!

Good point. And my employer is buying lunch during the states stay at home order, so I am in for $10. 

  • Like 2

Share this post


Link to post
Share on other sites

6 bucks is WELL worth the cost for this one. Heck, prepainted Merrow go for that alone!

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Knight of the Dinner Table
      https://www.kickstarter.com/projects/townsmith/townbuilder-unlimited?ref=discovery_category_newest
       
      "The Townbuilder is a web application with which you can create custom 3D printable buildings for Tabletop Games. We provide detailed 3D models in the form of small building blocks that you can then use to create the perfect building for your table. All of our buildings can be printed support free and feature playable interior.
      You can either start from scratch or modify one of our many prepared templates to fit your needs."
       
      This might be a huge step in 3d print files for buildings. With HeroForge, you can design your own miniature and get a printfile for it ... this here allows you to design multi-level buildings and get a printfile for them.
       
      This building was created with the use of the software and you can download it from the KS page for free:
       

       
      Open Beta is already up and running (link on KS page)
       
      I'm very impressed (and a bit happy that there finally is a project from Germany that is THAT awesome).
    • By Knight of the Dinner Table
      https://www.kickstarter.com/projects/cmon/cmon-time-machine/description
       
      Me personally I'm more or less done with CMON. No way I'm spending more than $1 here, but some of you might be interested or some might find the comment section entertaining.
    • By SamuraiJack
      https://www.kickstarter.com/projects/troublemakergames/miniatures-and-stls-from-the-technopocalypse?ref=discovery_category_newest
       
      Story
      Who Are Troublemaker Games?
      We  are an established wargames development company who design &  supply plastic, metal and resin miniatures for wargames retail  companies, whose sculptors also have experience doing freelance work for  other companies such as Mantic Games (for whom we sculpted, for  example, their range of 28mm scale plastic terrain kits, as well as various other plastic & resin kits).
      We  have previously run & managed eight other Crowdfunding  Campaigns,  raising a total of £84,048 to deliver plastic and metal  models for the  6mm scale wargame range, Defeat In Detail (1 2 3 4 5), our range of Plastic Wargames Terrain kits (1 2), and our 28mm scale Nuns with Laserguns! (1).
      We  have delivered all the plastic, resin, and metal kits from all seven of our own crowdfunding campaigns to our customers, and all models  (other than some Campaign Exclusive Limited Edition pieces) are now  available for retail  purchase through either Vanguard Miniatures, as  the "Defeat In Detail" and the "Troublemaker Games Plastic Terrain Kits" ranges, or the "Nuns with Laserguns!" range via our own webstore. Vanguard's own Crowdfunder (which we oversaw as Campaign Manager) has itself also been fully delivered.
      Some of our Nuns with Guns (painted) from our previous Kickstarter campaign. What We Need & What You Get
      We have several designs of Post-Technopocalypse Model kits already sculpted, but without a crowdfunding campaign it  would be too expensive for us to afford to put them into production, so  your interest and support at this stage means we can bring these designs to retail... and to your gaming tables!
      As we cross stretch goals we'll be unlocking more model kits, and hopefully adding free bonuses to existing pledges too (we've managed to include free bonus models on  every one of our Crowdfunders to date, and we'd love to continue that tradition!).
      So, this campaign contains rewards for pledging, consisting of:
      28mm Metal Model Kits STL 3d Files Download Packages All miniatures will be supplied unpainted. Scroll onwards to find out more...
      How Do Pledges Work?
      Each Scenery or Model kit in this Kickstarter campaign has a price in British Pounds (£) associated with it.
      To pledge, total up how many of each kit you'd like to pledge for, work out how many Pounds that would cost, and pledge for that total.
      For example, if you would like to pledge for:
       1x Tribal Guardswomen Infantry Squad (£20)  1x Mad Marx (£4) 2x Count Binface (£8)  1x Post-Technopocalypse Town STL Set (£10)  Total: £42
      Then you should select the "Miniatures!" reward, and should pledge £42; You will be prompted for postage and packaging in addition to your basic pledge cost. Once the campaign ends, you will be sent a questionnaire, which will ask you to confirm your chosen combination of model sets.
      If you only want STL digital file sets, select the "STL-only pledge" and pledge the appropriate amount for your chosen combination of STL sets.
      Some of the Stretch Goals that we hope to unlock during this campaign will also have Costs associated with them, whilst others will be free upgrades to existing sets.
    • By SamuraiJack
      https://www.kickstarter.com/projects/claudiagallery/arkanias-heroes-and-creatures-stl-files-for-3d-prints?ref=discovery_category_newest
       
      Story
      Hi!
      I'm  Claudia, a 3d artis with a lot of experience in videogame design. After years of freelance I mean that I'm ready to share my work with all of you.

          I have designed unique miniatures with an incredible story for each one. Mythological beings, heroes and villains, and creatures of all kinds. They all belong to the magical world of Arkenia.  They're  for any miniature fan who wants to test a 3D Printer with these  fantasy incredible characters.
        ---This campaign is for a set of digital STL files - no physical products----
        -The Arkenia's World is composed of 21 MINIATURES:
       -14 FROM  HEROES  SET -   3D model files (STL format)  
      -7  FROM VILLAINS   SET  -   3D model files (STL format)
      -Description Sheets for each of the 21 miniatures  (png format)
         HEROES 
       
    • By justcallmej
      We launched "Roads to Adventure" today, it is going swell
      it is a short duration kickstarter with a $10 consumer level buy in, Thanks for checking it out
      4 road styles ALL stretchgoals open, more being added Large road sections for 8 inch printers 35 road sections & 30 parts of scatter terrain Stretchgoals double parts and add road styles This is for STL design files only $5 wagon add-on now available (see images added below) 2 free models now up , swamp wall dungeon sticks and Dire Chicken (see images added below)  
       








       



  • Who's Online   12 Members, 1 Anonymous, 36 Guests (See full list)

×
×
  • Create New...