Jump to content
Sign in to follow this  
SamuraiJack

The Middle Land

Recommended Posts

https://www.kickstarter.com/projects/tinyleads/the-middle-land?ref=discovery_category_newest

 

Story

21470ee3298e7763dcd4bf640bf009e2_origina

The Middle Land is a campaign for producing a 75mm figure collection made in high quality resin, based on the medieval & epic fantasy that inspired so many novels, films, rpg and boardgames that marked the teen ages of this campaign authors.

On tiny leads we're huge fans of those 80's & 90's rpg, in wich characters such as the long white bearded wise wizard, the little halfling involved in big adventures or the evil orc were so frequent. That is why we wanted to bring those characters back, keeping the looks and designs of that era, but updated to the needs and demands of current collectors and painters.

Nowaday there's a magnificent computer designed miniature offer everywhere, but for this campaign we wanted to stick on the traditional hand-made sculptures, as we believe they bring an unique personality to the product.

d264de6381848cf3cf9306fe63b0c660_origina
a355558ef9af7cdc164eab7c855468b9_origina

The Halfling

It was all over. Peace at home and his relative's attention was everything he needed to smile and remember the thousand adventures he lived. Never stopping to think, even for a moment, in that treasure he carried in his pocket, as the most valuable memory of his travel.....

d716311bca7ca842873060c408169740_origina Sculpted by Paco Muñoz
4c0f1e32cdc659a473420da1f878a0fe_origina Painted by Oscar Rodríguez. Nocturna Models Team

The Orc

Looking to the horizon, he inquired the air searching for some familiar scent. Sharpening his ears for a sound that makes him smile again. But no. The silence was like a tombstone and the only thing left around was that friends and enemies blood smell .

b09d250579870e202e5cf7cd62425622_origina Sculpted by Paco Muñoz
bdabdb468b1a7d09c2cd737a808d0cb9_origina Painted by Oscar Rodríguez. Nocturna Models Team
df3dcccd4265916a8a4ba963401e2c88_origina Painted by Fabrizio Rusto

 The creature 

So there the strange creature lay, weak on its semblance, strong in it's desires. Its four limbs on the ground and its mind in only one thing. Its look... Was it fear what its pupils spread? Innocence perhaps? Its mocking wace didn't helped either. Not even the greatest torture would have revealed the truth beneath its words.

1adea0e6ca8a3a13a9539516768b9222_origina Sculpted by Paco Muñoz
aa88c31253fd54238608c682f7ee9615_origina Painted by Oscar Rodríguez. Nocturna Models Team
71b84baf493fc4c2572970ecc26ccffa_origina Painted by Javier González (Arsies Studio)

The wizard

The most important moment of every affront it's the one to stop, rest, check the maps... And smoke. There's no fight big enough that won't let a peaceful instant to think about your next move.

58f03ff79a9ccdcaa39e3a78f7331168_origina Sculpted by Paco Muñoz
6f0e638fb4cf02d54348e3ac4c603da0_origina Painted by Iván Hortal

Share this post


Link to post
Share on other sites

I feel like the venture will be sued for some kind of copyright infringement. 

  • Like 2
  • Thanks 1

Share this post


Link to post
Share on other sites
1 hour ago, Adrift said:

I feel like the venture will be sued for some kind of copyright infringement. 

 

My thoughts exactly.

 

4 minutes ago, Maledrakh said:

Not sure if a Trump-smirk is the best look for Bilbo.

 

 

 

 

I looked at that figure & knew something was off. Thou, I think the orc has more of the Trumpy look then Bilbo. There is just something off thou.

 

This one is a easy pass for me.

Share this post


Link to post
Share on other sites
On 4/7/2020 at 4:20 PM, Adrift said:

I feel like the venture will be sued for some kind of copyright infringement. 

This was my first thoughts when I saw this Kickstarter.

  • Like 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By SamuraiJack
      https://www.kickstarter.com/projects/awakenrealms/1897919106?ref=ek0vh3&token=dace0a50
       
      Story
      Welcome to Nemesis Lockdown draft page! Campaign is not yet live (currently planned for May / June), but you can see here some of the first information and leave your feedback! There will be gradually more and more stuff we will be sharing here, so you can check it out from time to time, but most importantly - click "Notify me on Launch" if you don't want to miss the campaign! 
      Nemesis Lockdown is first standalone expansion to Board Game hit - Nemesis (BGG rating #35 overall, #9 thematic). Lockdown will bring the same cinematic, thematic Sci-Fi horror feel to totally new setting: Base on Mars. It will come with lot of new, fresh ideas and content while keeping some of the core Nemesis mechanics that makes every play an unforgettable story to be told.
      Nemesis: Lockdown
      I should have known when they asked us to prepare the landing platform. There are only two reasons to make a night sample transfer. It’s either too urgent to wait, or it’s a black op. Both spell trouble.
      My survival instinct, honed by twenty years of work in the Sample-Return Receiving Facilities, was screaming, considering the rumours that reached even our remote site.
      Maybe if I bailed right there, I wouldn’t be crouching in a dark lab, sweaty palms clutching a scalpel, and this damned soft voice repeating over my head: “Containment Breach, Containment Breach…”
      Things only got bleaker when they told us there would be human BSL-5-ET subjects coming. Extra-terrestrial samples and living people don’t usually mix. They SHOULD NEVER mix. Something went really bad out there, and we got caught in it.
      When Martinsen and Sovich processed the first sample, I only caught a peek from behind the armored glass. There was one word on the container.
      “Nemesis.”
      I wasn’t there when the actual breach happened. There were screams over the intercom. The main power went out. Soon, I saw Martinsen and one of the human subjects running to me from the isolation ward elevator, as if the devil himself chased them. I’ve seen it for a split second, before they were caught. I’d rather take my chances with the devil, than with the thing that took them.
      Now, it’s been fifteen minutes since I last heard any shots. The pain in my mangled leg subsides. I get up and slowly make my way to one of the security stations. Am I the only one left? No, thank god! Sovich is still kicking. I have her on a live feed from the main terminal. She’s…
      Changing the logs! Switching her name for mine. Frigging rat! When the board learns we had a containment breach, there will be hell to pay, and she wants to make sure the bill is on my name.
      Now, she turns towards the main console. In the middle of it, under the protective glass, is the A3-5 button, a big chunk of red plastic. They told us it enables the “Code Red Emergency Protocol” but we had no clearance to know what the protocol actually is.
      Don’t do it, Sovich. You might just nuke us. Don’t…
      Of course she does. She wants to play the good girl, an upstanding citizen.
      Well, there’s still time to fix everything. No one will call until morning. We’re on a dark side of the planet now, blocking all signals. I need to get topside, to the secondary console in the other building. Re-write the logs, access the classified procedures, and see what new trouble she got us into.
      The only things between me and my salvation is a broken airlock, a long stretch of hellish surface, and enough gamma radiation to hard-boil an egg. I’m betting these things can’t walk outside.
      That would be too frigging unfair...
    • By SamuraiJack
      https://www.kickstarter.com/projects/initiativerod/the-legendary-rod-of-initiative?ref=discovery_category_newest
       
      Story
      Brothers Forged Campaign Supplies is a small business formed from the fellowship of an adventuring party. We have collectively been playing Dungeons & Dragons since the '80s. Now, with our diverse skill set, and months of building and testing prototypes we are prepared to create and launch this project.
      "Roll Initiative!"
      Two of the most exciting words to hear (or speak) in an adventure. But tracking initiative can be a major distraction from the action unfolding. Brothers Forged have tried many methods to keep players immersed during this process. None to our satisfaction. Until now.
      The world is untamed and wild regions abound. Monsters could be hiding around every corner, and sometimes they show themselves when you least expect it. And when they join combat in a later round, adding them to your initiative tracker can be a distraction from the gaming experience. When they are killed, removing them from the tracker is yet another interruption. Finally there is an easy way to add and remove creatures and enemies quickly and easily. With handcrafted wooden dry-erase compatible nameplates - that affix themselves to the tracker via the power of magnetism - it's incredibly easy to create space and shuffle the initiative order about while maintaining the immersion that makes Tabletop Role Playing Games (TTRPGs) so much fun.
      Behold, the power of magnetism! (actual tracker not self-assembling) The Legendary Rod of Initiative has vastly improved our gaming experience and now we want it to improve yours as well!
      How We're Going to Make It Happen
      Like a wizard preparing spell components for conjuration in a later battle, we have been building, testing, and revising the Legendary Rod of Initiative, at last conjuring it into creation in its current incantation. We have searched the shops of many towns and villages to gather all of the components and sourced the raw materials needed to scale production in order to deliver the Legendary Rod to the gaming community at large. The forge has been ignited, and the Brothers are ready to begin production.
      Right now, we need your help raising the gems, gold and silver coins needed to begin manufacturing. The funds raised by this campaign will be used to purchase the necessary components, keep the forge lit, manufacture, and ultimately deliver the Legendary Rod of Initiative across the realms!
      Pledge Rewards
      An original PDF adventure created by Brothers Forged. Delve into the lair of a unique dragon that possesses the power of magnetism and attempt to recover the Legendary Rod of Initiative -  a powerful magickal artifact.
      Includes maps, pre-generated characters, and the necessary information to GM and play the epic adventure. Based on 5e ruleset, recommended for 4-5 players, levels 5-10.
      Take your quest to new heights and play your character with more confidence! Track your initiative with a custom nameplate laser etched with your character's name (or a monster, or NPC, or BBEG, or your favourite animal companion's name). Built with the same awesome magnetic force that makes your party's Legendary Rod of Initiative so magickal. Up to two lines of text, 10-12 character limit per line.
      Actual nameplates will vary from those shown above.  A custom designed limited edition t-shirt featuring your choice from the evil dragon trifecta - red dragon, green dragon or blue dragon.
      Close-up of dragon artwork. All shirts will be black in color, with various sizes available. If your pledge includes this reward let us know your size and dragon colour in the Backer Survey after the campaign.
      Pledge for this reward tier and you'll get:
      1 Limited Edition Dragon T-shirt (your choice of dragon colour - red, green or blue) Quest for the Rod of Initiative (PDF) The original Brothers Forged Hex Dragon Dice Chest, available in Rustic Maple (stained a dark brown), Natural Maple, or Red Oak. Each chest is crafted from domestically sourced hardwoods, emblazoned with the head of a furious dragon. We use a beautiful oil finish that feels great in your hands. Each chest's interior has enough room for a set of 7+ standard polyhedral dice and includes a special hexagonal enclosure to keep your precious d20s separate. Plus, each chest includes a bonus 20-sided die for free!
      Examples of Hex Dice Chest finishes (dice shown, not included). Three different finishes available - your choice! Keep those dice safe; the dragon is on the outside guarding them for you!   Don't leave your dice's luck to chance, 6 strong magnets and innovative inset lip ensure each half is securely fastened shut to keep your dice, and your luck, as safe as can be. These will look awesome at your table during your next session.
       Pledge for this reward tier and you'll get:
      1 Hex Dragon Dice Chest (your choice of finish - Rustic Maple, Natural Maple, Red Oak) Bonus d20 die! Quest for the Rod of Initiative (PDF) You've waited your entire gaming life for this - an easy way to track initiative on the fly. Be ready for anything with the Legendary Rod of Initiative from Brothers Forged.
      The Legendary Rod of Initiative in all its glory.  
    • By Inarah
      Young artist, first Kickstarter project. Seems to be well planned. 
       

       
      https://www.kickstarter.com/projects/mashafalkov/riders-on-the-worm?ref=user_menu
       
      "The goal of this campaign is to fund the printing of high-quality stickers that are both UV resistant and waterproof.  Each sticker will be 4" x 4" - large enough to enjoy the smaller details in the artwork, printed on waterproof and UV-resistant 4mm vinyl."
       
       
    • By SamuraiJack
      https://www.kickstarter.com/projects/aleda/gothic-graveyard?ref=discovery_category_newest
       
      Story
      Hello and welcome to “Gothic Graveyard”. It's a collection consists of a series of stl printable files inherent to the medieval/gothic theme. All buildings, terrains, pieces, etc. Are designed for 28/32 mm tabletop games. The main objective is to make printing quick and easy to assemble, absence of supports, fun to paint and with the possibility to change the diorama whenever you want. The collection was designed for fdm printers, but nothing prevents resin printing.
      The project was conceived and developed to be printed at home with your 3D printer following and having as main reference three simple rules:
      • the modularity
      • the speed of realization and assembly through the use of simple magnets and glue
      • the absence of supports for printing
        STL LIST
      The models of the large mausoleum and the perimeter walls are perfected in two types, one constructive and one ruined to give you the freedom to alternate / use the ones you believe in best.
       
  • Who's Online   21 Members, 1 Anonymous, 37 Guests (See full list)

×
×
  • Create New...