Jump to content
Sign in to follow this  
SamuraiJack

The Middle Land

Recommended Posts

https://www.kickstarter.com/projects/tinyleads/the-middle-land?ref=discovery_category_newest

 

Story

21470ee3298e7763dcd4bf640bf009e2_origina

The Middle Land is a campaign for producing a 75mm figure collection made in high quality resin, based on the medieval & epic fantasy that inspired so many novels, films, rpg and boardgames that marked the teen ages of this campaign authors.

On tiny leads we're huge fans of those 80's & 90's rpg, in wich characters such as the long white bearded wise wizard, the little halfling involved in big adventures or the evil orc were so frequent. That is why we wanted to bring those characters back, keeping the looks and designs of that era, but updated to the needs and demands of current collectors and painters.

Nowaday there's a magnificent computer designed miniature offer everywhere, but for this campaign we wanted to stick on the traditional hand-made sculptures, as we believe they bring an unique personality to the product.

d264de6381848cf3cf9306fe63b0c660_origina
a355558ef9af7cdc164eab7c855468b9_origina

The Halfling

It was all over. Peace at home and his relative's attention was everything he needed to smile and remember the thousand adventures he lived. Never stopping to think, even for a moment, in that treasure he carried in his pocket, as the most valuable memory of his travel.....

d716311bca7ca842873060c408169740_origina Sculpted by Paco Muñoz
4c0f1e32cdc659a473420da1f878a0fe_origina Painted by Oscar Rodríguez. Nocturna Models Team

The Orc

Looking to the horizon, he inquired the air searching for some familiar scent. Sharpening his ears for a sound that makes him smile again. But no. The silence was like a tombstone and the only thing left around was that friends and enemies blood smell .

b09d250579870e202e5cf7cd62425622_origina Sculpted by Paco Muñoz
bdabdb468b1a7d09c2cd737a808d0cb9_origina Painted by Oscar Rodríguez. Nocturna Models Team
df3dcccd4265916a8a4ba963401e2c88_origina Painted by Fabrizio Rusto

 The creature 

So there the strange creature lay, weak on its semblance, strong in it's desires. Its four limbs on the ground and its mind in only one thing. Its look... Was it fear what its pupils spread? Innocence perhaps? Its mocking wace didn't helped either. Not even the greatest torture would have revealed the truth beneath its words.

1adea0e6ca8a3a13a9539516768b9222_origina Sculpted by Paco Muñoz
aa88c31253fd54238608c682f7ee9615_origina Painted by Oscar Rodríguez. Nocturna Models Team
71b84baf493fc4c2572970ecc26ccffa_origina Painted by Javier González (Arsies Studio)

The wizard

The most important moment of every affront it's the one to stop, rest, check the maps... And smoke. There's no fight big enough that won't let a peaceful instant to think about your next move.

58f03ff79a9ccdcaa39e3a78f7331168_origina Sculpted by Paco Muñoz
6f0e638fb4cf02d54348e3ac4c603da0_origina Painted by Iván Hortal

Share this post


Link to post
Share on other sites

I feel like the venture will be sued for some kind of copyright infringement. 

  • Like 2
  • Thanks 1

Share this post


Link to post
Share on other sites
1 hour ago, Adrift said:

I feel like the venture will be sued for some kind of copyright infringement. 

 

My thoughts exactly.

 

4 minutes ago, Maledrakh said:

Not sure if a Trump-smirk is the best look for Bilbo.

 

 

 

 

I looked at that figure & knew something was off. Thou, I think the orc has more of the Trumpy look then Bilbo. There is just something off thou.

 

This one is a easy pass for me.

Share this post


Link to post
Share on other sites
On 4/7/2020 at 4:20 PM, Adrift said:

I feel like the venture will be sued for some kind of copyright infringement. 

This was my first thoughts when I saw this Kickstarter.

  • Like 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Glitterwolf
      https://www.kickstarter.com/projects/buryak/the-rampart-printable-stl-3d-models-for-wargaming?ref=discovery_similar
       
       
       

    • By SamuraiJack
      https://www.kickstarter.com/projects/heresylab2/citizens-faith-and-honor-by-heresylab-28mm-resin-miniatures?ref=discovery_category_newest
       
      Story
         A new set of character to enhance your existing line of figurines. If you joined the first 2 Kickstarters you know how the models are, and if you missed them now you have a change to grab them at a discounted price. 
       Order of the Flaming Lys
      A unique set of warriors intent to defend the purity of the Flaming Lys, a medieval like war band composed by nobles and peasants. The Kickstarter is designed to add 3 extra free models based on funding to make a 15 member deal for 59.00€
      Templars of the flame
      A unique cult, a unique faith merged in a characteristic congregate of female priest warriors. The Templars of the flame will sacrifice their life to defend the purity of the flame from the villains.  The Kickstarter is designed to add 3 extra free models based on funding to make a 15 member deal for 59.00€ 
       Want to add more character to your war band or town? Just missed the first 2 Kickstarters? Here is a chance to get all of the models in bundle saving some "coins"
      Don't need a full set but just a few of them, don't worry all models of this Kickstarter will be available in the pledge manager as single model add-on options. Why not add the Sacred Flame girls to your warrior nuns? She will be an amzing addition.  
      Everyone selecting the Order of the Flaming Lys war band will get this model for FREE
       Everyone selecting the Templars of the Flame war band will get this model for FREE
       We thought that the new war bands needed some extra "heavy" support, well here  is Hans the Repent the not so devoted Ogre! This model will be a 9.00€ add-on. 
       Several more models coming to include 4 new freebies, 2 for each war band.
      RESIN MODELS PLEDGES 
      7.00€
      1 model - You can choose any single human sized model available in this campaign. Bigger models will require a small surcharge. No freebies at this level. You will be able to add additional models in the pledge manager after the campaign. 
      29.00€
      5 models - You can choose a combination of any single human sized model available in this campaign. Bigger models will require a small surcharge. No freebies at this level. You will be able to add additional models in the pledge manager after the campaign. 
      59.00€
      1 Warband - You can select one of the 2 war bands, this perk includes all unlocked applicable free stretch goals for the specific band. You will be able to add additional models in the pledge manager after the campaign. 
      110.00€
      2 Warbands - You can select two of the war bands, (You can select multiples) this perk includes all unlocked applicable free stretch goals for the specific band. You will be able to add additional models in the pledge manager after the campaign.
      229.00€
      I WANT THEM ALL - This perk gives you one of each of the models shown in this Kickstarter, and one of each of the Citizens models. This level also includes one of each unlocked applicable stretch goals. Currently 52 models (includes one of each of the citizens big guys) and may go up to 58 models based on funding. Hans the Repent is not included, but can be added as an add-on later in the pledge manager. 
         
       
    • By Marvin
      https://www.kickstarter.com/projects/246051873/veil-of-ruin/description
       
      Veil of Ruin is a post-apocalyptic fantasy campaign setting for DnD 5e, complete with a compelling adventure and finely crafted minis.
       

       

       
      ...
       
      Eh. Feeling a little iffy on this one, first project and the price points seem kinda low, but it got my interest.
    • By Jasper_the_2nd
      https://www.kickstarter.com/projects/rebelminis/rebel-minis-motorpool-kickstarter/description
      Story
      Welcome to our newest Kickstarter! You'll notice this one is a little different. In this Kickstarter we are offering the STL Files of some of our classic models for you to print on your home 3D printers. These files, created and designed by John Bear Ross, offer tons of combinations and entrance into an amazing realm of sci-fi models. These models come scaled in 15mm AND 28mm!
      Now, keep in mind, these are for personal use, not for commercial or resale. We own the copyrights and designs but for the sake of this Kickstarter, we are allowing the files to go to you, our loyal supporters.
      So why are we doing this Kickstarter?
      Short answer…We are raising funds to increase our in-house printing capabilities. This will allow us to develop more detailed models, models in larger scales, and bring out even more product lines. Rebel Minis is growing and we want you guys to be part of it.
      But we can’t do it without you, so please consider pledging, and spreading the word!
      Thank you,
      Mike and JBR
      The Reward
      We have only one. ALL the files listed to be available for one pledged amount.  You get the files to everything you see scaled in both 15mm and 28mm.
      Your pledge of $40 gets the whole kit n’ caboodle.  Once again, this is for PERSONAL USE! You do not have permission to distribute, copy or sell the files. *C'mon man, you know that ain’t cool!*
      Stretch Goals
      If we reach our goals, we will unlock stretch goals. These files will be added to the reward and download at the same time.
      Delivery
      After the Kickstarter ends, and if it is successful, you will get a survey to confirm your email. Later, when they are ready, we will email you the links for download.
      The Files
      Look at all these Glorious Files, they can be yours!
      Can I print the weapons and vehicles on FDM and Resin Printers? 
      Yes, everything should be printable on both types of printers found in common use. Most of our prints are optimized for desktop resin printers like the Anycubic Photon or the Elegoo Mars, but FDM should be able to support most builds. If we encounter files that are too large for resin printers, we will happily go back and supply sliced and optimized files to be printed in smaller chunks
      Gun drones, gun carriages, and weapons. 28mm and 15mm. The  Gun Carriages and brand new and have never been issued.
      15mm Painted Gunbot examples Gunbots and Gun Carriages Painted Example of 15mm Scaled Gun Turret The Sci-Fi Cycle build is a Fan Favorite. Weapon mounts on each side could be scaled for a variety of weapons.
      15mm Painted Examples of teh Sci-Fi Cycles With a variety of uses, The Combat Flatbed is a main stay on the future battlefield. The Hull can use the APC Treads from our other armored units, or use the original lifters as shown.
      15mm Painted Examples of the combat flatbed  MATVs come in both 15mm Classic and 28mm Upscale versions. Weapons turret has options for an M240G, M2 .50 Cal, M134 Gatling, and Mk47 Striker Grenade Machinegun. The MATV Truck is a new addition.
      15mm Apache Painted Example MATV Breakdown The Sahadeen's ride of choice, the Gila Fast Attack Vehicle. In 15mm Classic and 28mm Upscale. Weapon modifications for a variety of scenarios.
      Gila 15mm Painted example Gila Breakdown The Earth Force APC with a new grav module, treads that can also be used on the Combat Flatbed, the classic turret, and a double-barrel variant turret. There is a lot of flexibility in this model in both 28mm and 15mm scales.
      15mm Painted APC Wolverine Example APC Variations APC Breakdown  The Titan builds have multiple connection points to create multiple builds with the APC and the Light Tank.
      15mm Titan Build (painted) 15mm Scaled Titan APC Painted Example Titan ApC Grav Build Titan Track Build   Titan LTH Painted Titan LTT The Merka has been one of our best sellers in 15mm. New to this line is the battle-tank-sized grav kit has well as new small guns for the turret.
      15mm Scale Painted Examples 28mm Scale Print Merka Variations  Stretch Goals
      Below are our stretch goals and if we reach those goals, new STL files will be unlocked! Take a look!
       If we reach $2000, All Motor Pool pledges will receive the STL files for the Brand New Titan Battle Tank!
      Titan Battle Tank Stretch Goal If we reach $3000, All Motor Pool pledges will receive the STL files for the Brand New Mega Merka Tank... Madness!
      Mega Merka Stretch Goal!  
    • By Marvin
      https://www.kickstarter.com/projects/zansadventures/5e-dnd-pathfinder-1e-adventure-module-the-collector?ref=user_menu
       
       
      The Collector, a man of wealth and power, will stop at nothing to get that which he desires. RPG Adventure Module 5E D&D, Pathfinder 1E
       
      ...
       
      Don't know anything about these folks but thought I'd give this a look.
  • Who's Online   12 Members, 2 Anonymous, 34 Guests (See full list)

×
×
  • Create New...