Jump to content
Sign in to follow this  
Glitterwolf

Glitterwolf's 3D Printing Adventures

Recommended Posts

Succes!

 

 

20200806_132939.jpg.d51172535f202864ef0b3b212334c23f.jpg

 

Now to print the expirement, if it works I will have bugs and lizards to adorn bases and the temple.

Maybe If it works I will create another on with small snakes, rats etc as well.

 

Edited by Glitterwolf
  • Like 7

Share this post


Link to post
Share on other sites

Well that was fun.

I know my printer and settings are good since I printed perfect prints this morning.

 

The experiment however was a failure.

I created 11 tiny insects/lizards with supertiny supports.

 

4 of those were partly printed ( I will use them anyway, maybe partly covered or as dead bugs)

All others faile miserably.

 

I did shrink already small minis to 15% and some larger ones to 10%

It's too tiny to hold even with less lifting speed.

Another lesson:  In Chitubox it all looks large enough, so placing supports here and there looks fine.

In reality with such tiny stuff it will result in too many so you have troubles getting the tiny bug of it's supports.

 

How tiny?

Well I shrunk the minis so they are actually the size of a real fly.

The smaller kind...

 

I did have fun though, now I know how far I can go.

Next time I will use somewhat larger supports and a bit bigger minis.

 

Since the heatwave is upon us, I filtered and emptied the VAT now for a few days.

I have some minis waiting for paint anyway.

 

 

20200806_151550.jpg

20200806_153938.jpg

20200806_154015.jpg

  • Like 7

Share this post


Link to post
Share on other sites

So..ehhh. about those "few" minis I need to paint..

 

 

20200807_154653.jpg

20200807_154657.jpg

Also assembled the infiltrators.

 

With so many weapon options and hands I can easily make more with different weapons.

For now I went for one with spells in both hands, one with two blades and one with a short bow and a blade.

I figure the last one has just wounded his target with an arrow and now closes in to finish him.

The others are specialists.

 

Love these minis.

 

 

20200807_152831.jpg

  • Like 7

Share this post


Link to post
Share on other sites

I can see it now! One day there will be a yard sale of a house full of 3d printed minis that Glitterwolrf never painted!:lol:

  • Haha 3

Share this post


Link to post
Share on other sites
10 hours ago, Standifer said:

I can see it now! One day there will be a yard sale of a house full of 3d printed minis that Glitterwolrf never painted!:lol:

 

A thousand years into the future, my home will be discovered by an archeologist.

 

Headline:

 

**** RESIN ARMY found in tomb of an unknown Emperor! Even larger than the Chinese Terracotta Army!***

Edited by Glitterwolf
  • Haha 6

Share this post


Link to post
Share on other sites
Just now, Glitterwolf said:

 

 

That's it!

I got it!

I now have two parts saved as STL's!

 

Awesome, now I can cut big parts in pieces I can print on my Elegoo.

Thanks!

 

 

So I remember...

7 minutes ago, Rahz said:

Nothing stupid about not being able to do something... 

 

So, I imported the item again: 

image.png.7cd4803097e77e6fad9a086eba2c4b02.png

 

image.png.1de3d3cfe035243ea9c2f202c42565a5.png

 

 

 

Click Split.

image.png.9b6bf371fe6b447fe01f39893fd5ebd9.png

Both parts are now visible. 

 

image.png.6ecb11e69d6f86586d455f9336b4ebc9.png

 

 

image.png.8e1a2ecacd24eb04ef64271eb37f62e9.png

 

Same problem you reported earlier.  I can see the line where I split it, but it's a single piece. 

 

 

image.png.c88e8eb65aef43a5103c46f949d79a5a.png

But if I split and move one of the parts, this is what I get after a new save and re-open. 

 

Not sure if you are moving them apart or not, but it would seem that you have to. 

 

 

 

 

1 minute ago, Illithar said:

I think I see what is happening. When you save it in 3D builder it saves both halves as one file with two objects in it. If you want them as separate files: split it and keep both, then delete one half, save as stl, undo the delete (Ctrl + Z), then delete the other half and do another save as. That should get you two files, each with one half of the original file.

 

I don't know if there is a more elegant way of doing it, but that should work. Make sure to make a backup of the 'whole' file too, just in case.

 

  • Like 2

Share this post


Link to post
Share on other sites
4 minutes ago, WhiteWulfe said:

How tall is she, out of curiosity? 

 

It doesn't say in the description and I haven't printed her yet.

However this might give an impression.

 

 

image.png.0240b961bb2b3f6bfa06fa9fba9d1ebd.png

 

 

She's big.

This is chitubox based on my Elegoo Mars Printbed

image.png.779639c9bac863511cf41158b8a2fe5c.png

  • Like 3

Share this post


Link to post
Share on other sites
9 minutes ago, WhiteWulfe said:

Sounds like a lovely height... 

 

And don't forget. scaling up or down is possible with a 3d printer.

  • Like 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Rahz
      Another 3D print that I’m working on, this time a big one.  I’ve shied away from buying/printing dragons for the most part as I have a ton of amazing Reaper ones still to paint (or finish... ) but this one was a freebie of sorts from one of the creators I follow on Patreon.  
       
      In keeping with my clear resin tricks, I whipped up the base really quickly and then stalled on how I was going to paint the actual dragon...  oops!  
       


       
      I masked off the crystals and plugged the holes for the feet and primed it with a mix of brown and grey Vallejo primers, drybrushed it with a tan followed by a tan mixed with white and then it got a series of Vallejo model washes (green, grey and dark brown).  I then peeled off the mask and gave the crystals a quick coat with Tamiya Clear Green.  
       
      For the actual dragon, the plan now is to paint the heavier scales like the base with the softer belly and flesh being brown.  
       

       

       

       

       
      Like my recent plague doctor bust, I masked his eyes so they will be the same green as the crystals on his base.  I toyed with putting a light in his head as well, but seems to be doing that to everything all of a sudden, and skipped it.  
       
      in case you’re wondering about the pink, that’s what mixing the Vallejo red and grey primers did. The base was that colour before the drybrush and washes. 
       
      Hoping to get some more work on the brown and get the drybrush done on his scales this weekend.  That’s going to be a lot of drybrushing!! 
       
      Thanks for looking.  
    • By Glitterwolf
      This is Pope Bulbloba from the Death Tide Jurakin set from Artisan Guild.
      Printed on the Elegoo Mars.
       
      Wielding his magical weapon.
       
      Part of the Beneath the Waves Project.
      https://forum.reapermini.com/index.php?/topic/88958-beneath-the-waves-by-glitterwolf/&tab=comments#comment-1896746
       
       







    • By knarthex
      So as hinted in my US Armored Company thread, here's the beginning of @Glitterwolf's Dragoons!
       
      Some work on the Dutch tonight, PTRLs and C&Vs Had a problem with the wash I put on them last night, so had to re do the base coat. Tried a different wash, seen on one of the C&Vs, so need to try something else... Thanks for looking! SGT G   link to my US force








    • By Glitterwolf
      Female Oni Grunt from Artisan Guild.
      I printed it on the Elegoo Mars
       
      Part of my Project:
      Nippon, Land of the Rising Moon
       
      WIP https://forum.reapermini.com/index.php?/topic/79416-nippon-land-of-the-rising-moon-by-glitterwolf/
       
       
       




    • By Glitterwolf
      Here is another 3D printed mini.
      She's from Artisan Guild from the Death Tide Jurakin Set.
      This is the pin up - Telxia Tidal Beauty.
       
      She's a mermaid so she's partially nude hence the links.
       
      NUDITY
       
      https://i.postimg.cc/pLKqmNwK/20200628-202434.jpg
       
      https://i.postimg.cc/SKqV8T43/20200628-202438.jpg
       
      https://i.postimg.cc/hGrs0LPj/20200628-202443.jpg
       
      https://i.postimg.cc/9fRCJpTp/20200706-145915.jpg
       
      https://i.postimg.cc/5NvP6yw3/20200802-164903.jpg
       
      https://i.postimg.cc/gr96CYjc/20200802-164834.jpg
       
      https://i.postimg.cc/P5Q2Q7Vv/20200802-165026.jpg
       
      WIP here, she's part of my Beneath the Waves Project.
       
      https://forum.reapermini.com/index.php?/topic/88958-beneath-the-waves-by-glitterwolf/&tab=comments#comment-1896746
  • Who's Online   8 Members, 1 Anonymous, 34 Guests (See full list)

×
×
  • Create New...