Recently Browsing 0 members
No registered users viewing this page.
By Lidless Eye
Figured I'd put together one big thread of my recently finished 3D prints. Everything was printed on an Elegoo Mars.
Titan Behemoth from Duncan Shadow Louca:
Cyclops Behemoth, also from Duncan Shadow Louca:
A scale shot of those two, with Sir Forscale and a not-Johann the Running Man as my plastic one is broken:
Which leads into:
"You don't STINK like a peasant." "You don't DRESS like a peasant." "And you're definitely not ON FIRE like a peasant."
Fleeing Peasants off Thingiverse:
"So yeah, the treasure chest gets up and decks you."
Brawler Mimics off Thingiverse:
Vapour Snakes off Thingiverse:
Spell Effects from Vae Victis:
Cook, also from Vae Victis:
Angry Barmaid, from Titan Forge
Urd, from The Lost Dragons
So, first off, sorry if this is in the wrong category. Wasn’t sure which one to put it in, so.... Here it is.
As I’ve been painting for a while, the thought of “hey, maybe I should print my own minis” popped into my head. I pursued this thought a while, and then determined that yeah, I should probably go ask the professionals. So, here I am, rapid-firing questions like a nitwit.
First of all, what are some of the pros and cons? It would seem that it’d be cheaper in the long haul, but don’t you have to buy the 3D model as well? (But MF, you could finally make those minis you’ve made in your spare time on Hero Forge.......)... What are some of y’all’s pros and cons?
Second off, what printer? From my research, it seems that resin provides the most detail, but is more expensive, so I’d like to avoid it if at all possible. I’ve heard that the Creality Ender 3 seems to be best for the rookie on a budget (which I am in the largest sense of the word), but is it really?
Lastly, is it actually worth it in the end? In both the regards of pleasure with the final product and economically?
All thoughts and advice is needed and appreciated! Thanks, all!
By Lidless Eye
I figured I'd do one mega-gallery of the first of my resin 3D printed miniatures. All are done on an Elegoo Mars.
Oni Kyojin from Artisan Guild. My first printed, as they were pre-supported.
Rangers of Shadow Deep: Incinerator left me with a hankering for an old-school Ogre. This guy is not really a Heroquest Ogre but a 3D print from a scan of one.
Demihuman Zombies from DuncanShadow:
Kobolds from DuncanShadow:
Warforged from Fabio Schizzo:
Orcs from Artisan Guild:
An assorted collection from The Lost Dragons Kickstarter.
A Dragonborn Paladin and High Elf Druid representing my sister in law and her husband's characters for our Storm King's Thunder campaign from said assortment:
Has anyone tried stripping paint from a photo resin miniature? I have one that I... well I messed up on it and It's not really salvageable now unless I can get the paint off. I've heard Simple Green is safe-ish for regular resin (I have read stories of softening and becoming more brittle after re-hardening), but I am not sure if photo resin would be any different. Are there any other cleaners that I might try or should I just dunk it in Simple Green and hope for the best?
Hey look, yet another Jasper topic.....
But this one is different (I hope). I actually have a time frame in mind, to get this finished before the end of 2020, and submitted for the annual diorama contest.
I love dioramas, and I've been pretty happy with the few I've made. BUT I always put off getting started and then end up rushing over Christmas to get everything done.
So this year I'm starting in January (if just barely) so that I will hopefully get some stuff done before December.
I've had the idea for this diorama since the very first moment I saw my first "sneak preview" of Khanjira (that would have been approximately Fri, Oct 25, 2013, 7:57 PM ADT, according to when I got the email from Kickstarter).
My first though was something like "What a beast! Imagine if he was fighting something from a smaller scale, like CAV...."
So that has been bouncing around in my head ever since.
Then I was messaging with @Pochi a few weeks ago about the contests and got talking about dioramas, and I mentioned this idea, and she said I HAD to do it.....so here we are.
Basic concept is the classic Kaiju attacking a future city harbour. CAVs (any or all of tanks, vehicles, mechs, infantry, maybe even aircraft) defending. (I briefly considered going even smaller scale as I have quite a bit of 6mm stuff too, but CAVs are easier to work with, I have about a billion of them, and they are awesome).
Today was a beginning. I grabbed some stuff and laid it out just to get an idea of a size I'm going to want.
Obviously I just grabbed what was handy to get some scale. Khanjira is represented by my 7 days Khanjira (handy, that ). I plan to try to get him a little more upright, since he won't be on his base and at least his front foot will be "under water". With his pose (which I don't think I have the skill or know how to adjust too much) I'm thinking maybe an elevated highway that he has just crushed to be what his right leg is on. That or a boat of some sort....we'll see.
The box is just a reference for the land, glasses are just some buildings. I'm picturing something similar to the Halifax waterfront with boardwalks or something and docks/jetties (the grey upside down drawer represents) and then big buildings. Army will be in place along the waterfront, so some barricades and stuff. Possibly a trench of energy blasted ruin from the "breath weapon" if I think I can pull that off. Again, we'll see.
So just from the mock up, this is going to be fairly massive...like approaching 2 foot kind of dimensions
Not something I would do if I was following advice on building award winning dioramas, but then that's not what I'm focusing on. I just want to make the image in my mind a reality, and I'm using the contest deadline to hopefully focus me.
I'm also going to have to learn to do a bunch of new stuff for this, which should be fun!
Step one will be to dig out my other Khanjira and start cleaning up up. And decide on what I'm going to use for a base for this thing.....
Who's Online 22 Members, 4 Anonymous, 36 Guests (See full list)