Recently Browsing 0 members
No registered users viewing this page.
Brief word of introduction. I know next to nil about CAV. My current interest in it is solely from a painting perspective. With that in mind, please excuse any blunders I make.
So, I'm a painter looking for some cool stuff to paint. I see CAV's mechs. I think "I like mechs, those look cool, I think I'll grab some". Then my eyes flicker upwards towards where it says "10mm scale". I think you can see where this is going.
Long story short, how big are these? It looks like they come on 1" hexes, and $4.99-$6.99 is quite a lot to charge for a small mini (in my opinion, of course).
Many thanks, all!
So I finally fell into the temptation and got my first ground based sci fi minis!(I do have spaceships.)
A Cataphract, conquerer , and a halberd by Reaper minis came in with my horsman today! Sadly the halberd is missing a piece so it may in end up being returned.
So my first order of business was a small conversion to the cataphract
And the conquerer has donated the necessary parts for said conversion, specifically his smaller missile pods.
A bit of work with an exacto knife removed said weapons.
And a bit more exacto work to make a spot for the pods on the Cataphract.
Some super glue to assemble the cataphract and voila! It is time for paint!
And don’t worry about the Conquerer, I have a conversion in mind for it too. It just might not be a true mech when I’m done.......
More sci-fi stuff to come soon I hope!
And maybe just maybe I’ll try to make a backstory for these guys.
Thankyou for looking!
Hey look, yet another Jasper topic.....
But this one is different (I hope). I actually have a time frame in mind, to get this finished before the end of 2020, and submitted for the annual diorama contest.
I love dioramas, and I've been pretty happy with the few I've made. BUT I always put off getting started and then end up rushing over Christmas to get everything done.
So this year I'm starting in January (if just barely) so that I will hopefully get some stuff done before December.
I've had the idea for this diorama since the very first moment I saw my first "sneak preview" of Khanjira (that would have been approximately Fri, Oct 25, 2013, 7:57 PM ADT, according to when I got the email from Kickstarter).
My first though was something like "What a beast! Imagine if he was fighting something from a smaller scale, like CAV...."
So that has been bouncing around in my head ever since.
Then I was messaging with @Pochi a few weeks ago about the contests and got talking about dioramas, and I mentioned this idea, and she said I HAD to do it.....so here we are.
Basic concept is the classic Kaiju attacking a future city harbour. CAVs (any or all of tanks, vehicles, mechs, infantry, maybe even aircraft) defending. (I briefly considered going even smaller scale as I have quite a bit of 6mm stuff too, but CAVs are easier to work with, I have about a billion of them, and they are awesome).
Today was a beginning. I grabbed some stuff and laid it out just to get an idea of a size I'm going to want.
Obviously I just grabbed what was handy to get some scale. Khanjira is represented by my 7 days Khanjira (handy, that ). I plan to try to get him a little more upright, since he won't be on his base and at least his front foot will be "under water". With his pose (which I don't think I have the skill or know how to adjust too much) I'm thinking maybe an elevated highway that he has just crushed to be what his right leg is on. That or a boat of some sort....we'll see.
The box is just a reference for the land, glasses are just some buildings. I'm picturing something similar to the Halifax waterfront with boardwalks or something and docks/jetties (the grey upside down drawer represents) and then big buildings. Army will be in place along the waterfront, so some barricades and stuff. Possibly a trench of energy blasted ruin from the "breath weapon" if I think I can pull that off. Again, we'll see.
So just from the mock up, this is going to be fairly massive...like approaching 2 foot kind of dimensions
Not something I would do if I was following advice on building award winning dioramas, but then that's not what I'm focusing on. I just want to make the image in my mind a reality, and I'm using the contest deadline to hopefully focus me.
I'm also going to have to learn to do a bunch of new stuff for this, which should be fun!
Step one will be to dig out my other Khanjira and start cleaning up up. And decide on what I'm going to use for a base for this thing.....
This is a Cataphract mech by Reaper minis from Cav with added missile pods from a conquerer mech.
white surface primer
Model Masters paints,
Man! I didn’t realize I used that many colors on this thing!
Enough about paint! Time for pictures!
I have enjoyed painting this up and even got to try something new.
Thankyou for looking and feel free to offer constructive critiques!
Yes, a 2020 ReaperCon WIP! And a massive undertaking at that. I'm trying very hard not to nerd out and put this whole project into, er, Project. There's just so many pieces to keep track of, that maybe I'll just use this first post to keep track of things.
Some background stuff, starting with a quote from the "Paint a giant robot! Group WIP" where I wrote some of what's planned:
You can read the rest of that post here: Paint a giant robot post and a second one to see where I'm going with this: PLA print post in same topic
Biggest takeaway is that, while useful, my PLA printer can only do so much. I have a resin printer backed on Kickstarter, but considering it's now 3 years late, I don't think I should hold my breath on it ever showing up. Especially when I can get a new Elegoo Mars resin printer with more capability for relatively cheap (<$300). The PLA machine was bought with both hobby and household goals in mind, and it's served well. But the resolution just ain't there! More on that down the posts.
I also had the chance to gain some experience on paper plants at ReaperCon (Main post for that in the Terrain section post here: Vellum Paper Plants - Alien Jungle (WIP)
Basically, I have the scrap booking machine to make my own alien plants:
Which now leads me to this WIP. This is going to tie all those pieces together. The robot WIP will still be to get a good camo scheme, but that print job is not going to be used for the final diorama. Instead, that will be the resin printer's job. So, let's break down the WIP work that I can see so far, and will be edited later to add things and mark completions.
Tasks to be completed:
Wight (being pulled down backwards, caught by hidden lines) Gremlin Unit 01 (stole a supply crate and ran; actually just bait to get the larger CAV to follow) Gremlin Units 02 and 03 (trip line pair, successfully snagging Wight across the chest) Gremlin Units 04 and 05 (trip line pair, successful across another part of the chest) Gremlin Unit 06 (burner unit, cut Wight's left gun in two) Gremlin Units 07 and 08 (trap door unit, hiding entrance to jungle path with camo doors strapped to them) Gremlin Units 09 and 10 (trip line pair, successful across right thigh) Gremlin Units 11 and 12 (trip line pair, broken cable across chest, possibly falling over from sudden jolt) Gremlin Unit 13 (ECM unit, some large radar dish looking thing) Gremlin Units 14, 15 and 16 (cargo units, loaded up with stolen supplies and headed out) Gremlin Units 17, 18, 19, and 20 (gun units) Gremlin Units 21, 22, and 23 (missile units) Gremlin Unit 24 (large gun unit) Gremlin Unit 25 and 26 (junked units; scavenged for parts?) Gremlin Unit 27 (2nd style missile unit) Gremlin Unit 28 (personnel carrier unit)
Right Leg: cut from pelvis; reposition Feet: cut off both feet and swap positions since the tread is only on one foot Base: cut away from right foot, possibly keeping full base around left foot Left arm (maybe): cut gun into two pieces, having one falling to the ground after being cut by a heat lance/chainsaw rope
Details to be included
Camo doors at front leaving marks on the dirt path, but hiding the ambush from the main trail Pieces of old broken larger CAV units around Wight gun cut in two, maybe showing inner details. May have to 3D print an add-on piece Dust being kicked up by the stolen crate (going to try using dyed cotton) IN WORK One cable snapping dynamically, with several bends and twists (superglue on thread?) Multiple vehicle tracks around camp Campfire and tents for people A latrine Other camp details (laundry, chairs, sports equipment, bored carvings, etc)
Jungle Plants (V=Vellum cuts, B=bought, S=Sculpted, F=Found, P=Printed)
Large lotus flower like plants, but dry land and maybe odd colors with a large conifer cone growing from the middle (V) Jester hat plant (balls on stems around a central point) (V) COMPLETED Spiky yucca like plant (V) Jagged leaf plant (V) Tentacle plant (V) Tripod trees (three spoke trunks) (V) Large palm fronds (S) Coral like trees (P) Horn tree (lots of horn shaped leaves from a central trunk) (P, V) Ball vine (like ivy but with odd leaf shapes) (V) Cabbage-like jungle plants with large wrinkled leaves (V) Fuzzy vines (thin wire coated with static grass) (S) Anything I can buy from N/HO scale train setups and painted alien-ish (B) Reaper figures that can be clipped and painted to be plants (B) Odd trees with strange leaf shapes (onion shaped) (V) IN WORK Random grass-like jungle plants (V) IN WORK Stem ends from mandarin oranges (seriously, pull one off and look at it, stem towards the ground) (F) Anything and everything else (VBSFP)
Base mounting system
Design and print modular tiles with bristles on top (basically, Bristle Block toys) Allows mounting of all the above jungle plants Fill in around plants with thinned plaster via a syringe to create the ground surfaces
Who's Online 19 Members, 1 Anonymous, 34 Guests (See full list)