-
Recently Browsing 0 members
No registered users viewing this page.
-
Similar Content
-
By Thrym
Tor Skullcrusher,
dwarven tattooed monk
A Thrym Project :: A Custom Miniature developed on Hero Forge and 3D printed by a friend.
Started working on character of mine who is a Dwarven Tattooed Monk. As I mentioned, I created him using Hero Forge, downloaded the .STL, and had him printed elsewhere.
I enjoy using the interface on Hero Forge so far. I have designed and purchased 3 STLs and 2 minis.
Once I received the print, I made a manual adjustment to his skull. An ironic happenstance, given the character's name.
Tor, being a dwarf and confident in his skills against ogres was going toe-to-toe with a rather large ogre with a great club. This is not something unusual so far. The party had been exploring an ogre controlled encampment searching for an item and information for a tribe of centaurs nearby. Unfortunately, Tor suffered a critical hit from the Ogre Champion's club and took a lot of damage when he was already near unconsciousness. He effectively had his namesake applied to his own noggin.
So I removed a large segment of his skull by the patch to approximate the results of his disfigurement once the party ... eventually ... managed to raise him from the dead. His demeanor and appearance was never pleasing to begin with and now it's even worse.
I painted on a primer coat first so I could see where I was removing plastic better. The majority of the work was done with a rounded mini-file as well as a small gouge chisel. I cleaned up the space with a small sanding twig.
For a color scheme, his pallid skin is Reaper's Fair Skin. The coat is Army Painter's D&D Vampire Garments with Army Painter D&D Mouldy Wash. I put the wash over his skin and his hand wraps as well. The coat's trim is just the Vampire Garments again.
For the tans I used Reaper's Desert Sand, Desert Stone, Desert Tan, and Woodland Brown; or some combination thereof. The eye patch, the lining of the coat and the belt are Army Painter's D&D Wraith Black as well as the tattoos on his right and left forearms and the side of his head.
His boots started out as Reaper's Coal Black but I need to reshake the bottle before going back to it.
Yes, I know the pics and the paint wash are a little dark, but the next set of pics will be better lit. I am planning on layering his highlights up to brighter points.
More work to come soon.
Stay Tuned and Safe. Enjoy.
-
.thumb.jpg.4704807a4132388f4701d12227cb626c.jpg)
-
By lazarp
Painted a bunch of Lannisters this week including both soldiers and charactera. Tyrion's sculpt has surprisingly great face and was interesting to paint overall :)
(click on images for better quality)
-
By Metalchaos
Hello everyone! After seeing @Kangaroorex Grenadier 9601, Black Dragon, I decided it was time for me to salvage mine from the shelf of shame. Thanks for the motivation Kangaroorex. This model was sculpted by William Watt in 1988. Unfortunately, the one I bought some years ago had a few battle scars. It has a broken horn and a broken wing claw. Its main tail stinger and tongue were also broken. As a reference, the base is 75mm wide.
-
By Peithetairos
An older miniature I started years ago, but finished recently. I think it was mostly the weapons (shading) and dirty shirt missing. I would say the paint job is average, but I do like the miniature.
I decided to go for a simple, but interesting base, featuring a Nolzur's bottle and Thomarillion barrel.
-
-
Who's Online 6 Members, 0 Anonymous, 38 Guests (See full list)