Jump to content
Sign in to follow this  
Dan S

Dan's Build Journal: Halfling Edition (FINISHED)

Recommended Posts

Dan's Build Journal #1

Halfling/Hobbit Hole



Completed Project Photos:









 My Other Build Journals:



Greetings all!


I recently undertook the task of creating several display pieces to serve as scenic backdrops when photographing my miniatures, however being the procrastinator that I am, I have instead found myself with an ever growing pile of unfinished projects.  In an effort to break this cycle I am no longer allowing myself to start new projects until my current one is complete. I figure a progress journal would be a great way to hold myself accountable, and hopefully by sharing my build process even inspire others into giving diorama building a try.


Anyway, without further ado here is my current work in progress, a good old fashioned hobbit hole.  I managed to pick up a cheap and incomplete resin kit (front wall and chimney) on Ebay a while back.  I painted it about a month ago, and it has sat on my desk gathering dust ever since.  Today I finally started to put in some real work on the build.


29/05/20  -  Laying the foundation.


The first job was to lay the foundations of the build.  I hot glued thick polystyrene sheets to an old photo frame and then cut them to shape using a hot wire cutter.  The challenging part was then getting the front wall to fit convincingly into the hill, being an incomplete kit, the front wall was completely rectangular and just didn't look right no matter how I positioned it. To fix this, I measured out and then cut some thick card stock in to triangular sections, and then cut some thinner strips to match the wooden beams on the front of the house.  I then glued these to the house so that the walls now followed the contours of the hill more organically.  I also made some curtains using some old fabric (The original kit has holes for windows and I needed to hide the polystyrene behind them).


Next I mixed up some Sculptamold and started to cover the polystyrene and base of the picture frame before adding some rocks that I had cast previously with Plaster of Paris (They are probably hard to make out in the photo, as they blend in with the white sculptamold, but once painted they should stand out nicely).  With that done I decided to call it a day, and give the sculptamold the night to fully dry before adding any paint.  And that is pretty much how I spent my Friday afternoon.


Apologies for the poor picture quality, I took the photo during the evening in poor lighting with my ancient phone camera.  I'll get some better pictures up once I have something more substantial to share.



Edited by Dan S
  • Like 19

Share this post

Link to post
Share on other sites


12 minutes ago, Glitterwolf said:

That looks awesome already!


Thanks, its still far from complete, but it is starting to take shape now.



30/5/2020 - Laying down some colour and preparing the minor details.


I started off by painting the rocky outcroppings using the Leopold Spot wash technique, before base coating the hillside brown.  It is a very quick and dirty basecoat and whilst it may look a patchy mess at this point all this area is going to be covered in grass so I am not too worried.


Next I started work on a stone pathway, the paving stones were created using an old paper egg box, which I carefully tore into rough shapes.  The reason I used egg box, is because the card has a very rough bumpy texture which gives a great stone effect when painted.  These were then glued to the base and overcoated in a layer of modpodge, which when dry and hardened will serve as a protective barrier when I come to paint them (It will help when applying washes, as it will prevent the paper soaking up and absorbing all the wash like a sponge).  I'm going to leave this to dry overnight before painting.


Finally I started work painting a well for the garden.  The well is a D&D Deep Cuts model by Wizkids, I removed the transparent plastic water piece that came inside model, and will eventually fill it with resin for a more natural looking water.






well then.png


Edited by Dan S
  • Like 10

Share this post

Link to post
Share on other sites

31/5/20 - What a difference a little grass makes


I was pretty excited about today, my favourite part of any diorama build is applying the static grass, which instantly transforms and brings a project to life and you can finally start to see the piece you have envisioned in your minds eye.

Before that however I returned to the 'Egg Box' footpath that I prepared yesterday.  I was not quite pleased with the branching path I laid down leading to the well, and decided to remove it.  The rest of the stones I painted with a mix of greys, browns and ocres, and then blended them together with several dark washes.  I used a hairdryer to speed up the drying time.


Next I masked off the rocks, house and chimney with masking tape and coated all the ground in PVA glue before applying my first layer of static grass, a 2mm spring grass.  Using a spray adhesive I then layered 2mm Autumn grass, followed by 2mm winter grass to add some different hues of colour and give the grass a more natural look.  On the actual hill I also used some longer 4mm and 6mm grasses as I felt these areas would be a little more overgrown and unkept.  I had a bit of a disaster removing the masking tape.  The two triangular corner sections of the house which I'd made from cardboard both had paint peel off as I removed the masking tape (The rest of the model was unaffected).  I am not sure whether I should touch up the damaged areas, or just leave it as weathering, a happy little accident and Bob Ross would say.  What do people think?


Anyway I'm fairly pleased with the progress so far, the build still still looks incredibly barebones right nowbut that should change once I start work on the garden.   On another note, does anyone know of any companies producing scale gardening tools in 25-28mm scale? (Shovels, Rakes, Pitchforks etc?)


P.S - I dont know why my curtains photograph so brightly, they are the same shade of red as the door in real life, its like my hobbit hole has red eye!




Edited by Dan S
  • Like 14

Share this post

Link to post
Share on other sites

End of day progress.  The trees were made using Seafoam (A dried plant cutting popular with scale railroad enthusiasts), which was painted brown, coated in a spray adhesive and then covered in static grass to mimic foliage.  All the other plants with the exception of the clump foliage came from Diorama Presepe.


I actually ran out of glue at this point (I thought I had a lot more), so the project will be on hold for a day or so until I can pick some up.  


Final jobs are going to be:


  • Add more plants/flowers
  • Build a picket fence.
  • Fill the well with water
  • Smoke coming from the chimney.
  • Paint up a couple Reaper Halfling Farmer models I have gathering dust, as well as a few animals (Reaper Familiars)


  • Like 11

Share this post

Link to post
Share on other sites

Well it turns out I am not going senile after all, I did in fact have another pot of glue, it was just hiding from me.


Anyhow, I managed to get a good chunk of the garden completed, the plants are a mixture of Diorama Presepe, World War Scenics and a small handful I made myself.


Edited by Dan S
  • Like 10

Share this post

Link to post
Share on other sites



it might also function as a nice scenic photobackdrop for painted minis.


  • Like 2

Share this post

Link to post
Share on other sites


2 hours ago, Glitterwolf said:



it might also function as a nice scenic photobackdrop for painted minis.



That's the plan! ::D:


I have a nice Lem, Halfling Bard (60011) and Vistaril, Quillscratch, Wizard (03393) I think I could pass off as Bilbo and Gandalf.


02/06/20 -  Birds and Walls


I had originally planned to build a picket fence to section off the lawn area of the garden,  however last night I found some old XPS foam bricks I had forgotten about, and figured stone walling would probably better fit the rural countryside feel that I was going for.  This has presented a couple of challenges and in hindsight, ideally I should have built and laid the wall at the start of the project whilst I was at the sculptamold phase. 


The first issue is that I now have to build and paint the wall separately from the base, as it would be next to impossible to paint and not get inks and washes all over the grass.  Now this may not sound like a big and normally it wouldn't be, however the second issue I have is that the ground is not completely flat, there is a lot of subtle undulation, and so building the walls separately from the base as opposed to building them directly onto it means that the sections will not sit flush with the ground. 


So in summary I could either glue the bricks directly onto the base to ensure the wall fits snugly and evenly into the ground, but then risk getting paint and ink all over the grass, or I could build and paint the walls separately at the risk of the walls fitting poorly to the base.  In the end the best compromise I could come up was to build the wall seperately, but to test fit and reshape it to the diorama after gluing each individual brick (Which is why the base of the walls look a little curved right now).  I plan to texture the stonework using the 'Aluminium Foil' method before I paint it, but don't have any at home right now and so the walls are on hold for the time being. 


In the meantime I've started work on the first of my wildlife, this WIP is a crow from Reapers 'Familars VII' pack (02969), I have filed the skull base off, I dont think it would have suited the tone of the scene) and plan to perch him either on the chimney or the well.



Edited by Dan S
  • Like 5

Share this post

Link to post
Share on other sites

Well here it is, I think I am pretty much finished with this build.  I have a habit of going overboard, and would probably still be pottering away on it few weeks if I didn't stop myself.


The final touches included; texturing and painting the wall sections I made a few days ago, adding a few more plants along the perimeter of the wall, adding 'water' to the well and perching the raven on the chimney.  I am fairly pleased with the end result, now I just need to paint up a couple of halflings!


Anyway, I dug out my lightbox so I could take some decent pictures of the end result.







  • Like 11

Share this post

Link to post
Share on other sites
13 hours ago, snitchythedog said:

Love the groundwork.


Thank you, it is actually fairly easy to emulate, I pretty much learned by watching this video by Lukes APS: https://www.youtube.com/watch?v=8FWCD_MMD_M


The only difference is that I lack his fancy static applicator, and so used a vacuum from a couple of centimetres away to try and coax the grass to stand up. 

Edited by Dan S
  • Like 2

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Dan S
      Dan's Build Journal #3
      Dank Sewers
       Latest WIP Picture:
        My Other Build Journals:
      First off the elephant in the room.  I appreciate I have literally just started 'Build Journal #2 - Ancient Ruins' which has only had one post so far, unfortunately that's had to go on temporary hold.  My last piece of foamboard isn't quite big enough to support the planned build and I do not have anything else strong enough to hold it and so I've had to order some.
      Rather than waste my last weekend off work, I figured I'd start work on one of my smaller quicker builds which should keep me occupied until the foamboard arrives.  This ones going to be a photo backdrop of a dark, dirty, fantasy sewer system.
      Preparing the Masonry
      For this build I am going to be using 'Hirst Arts Mold #343 - Underground Brick' and casting the blocks from Dental Stone which is a lot more durable than plaster.  Luckily I had prepared a large batch of these blocks at the same time I was making blocks for my Ancient Ruins build and so I was ready to go straight away.  The first job was creating a back wall for the project, which took around an hour to both experiment and dry-fit something I was happy with and then glue it all together.  At present the wall has some pretty obvious and unsightly 'seam lines' where you can tell it is just a bunch of blocks glued together, that will be fixed later.
      Laying the Foundation
      For the foundation I used a sheet of 6mm foamcore, which I then cut to the length of the wall.  I then measured and cut a block of polystyrene using a hotwire tool which will serve as the walkway above the sewage water.  I glued a second piece of foamcore (this was the offcut from the first piece I had cut to size) and glued that to the back, this is to give the wall a bit more support once glued to the base.  I quickly tested the fit (but didn't yet glue the wall to the base)

      Preparing the Walkway
      The walkway was made out of Sculpy, a modelling clay that needs baking to harden.  I used a Greenstuff World texture roller to imprint a stone brick floor pattern into the clay, test fitted it to the polystyrene and then cut it to the right size.  The flooring was then baked and glued to the polystyrene once cooled (This shrunk slightly in the oven, if you look at the next picture the wall slightly overhands the path now).  I added a brick wall against the the polystyrene where the water will eventually flow, but the height was just off, to fix this I glued some old foam bricks I had laying around to the edge.  These are a lot bigger than the bricks of the wall and floor, however as edging pieces they seem to work well, I textured these with a scumpled up ball of tinfoil.  Finally I attempted to fill the gaps and seamlines where the blocks meet with some home made spackle.  I rubbed dry powdered plaster into all the gaps and then used a soft haired makeup brush to gently dust away the excess which had gathered and filled in the detail of the brick work, once cleaned up I spritzed the entire thing with water to soak into the cracks and dried plaster.  I may need to do this a second time, but its already looking a lot better. 

      Creating the Waterway.
      To finish up the waterway, I built another wall section and placed it a few inches out from the first, I then cut away the excess foamboard to keep the build neat and compact.  As the clay floor I'd made ended up a little uneven in places, the back wall no longer sat flat and there were gaps as a result, especially under the final buttress (not that obvious at the angle I photographed it above, but it was quite a large gap).  I ended up filing all these gaps with some sculptamold, I also made some small debris piles around a few of the buttresses.  To finish off the whole model was primed white ready for painting.

    • By Dan S
      Dan's Build Journal #2
      Ruined Keep Edition
      Finished Project Photos:
      My Other Build Journals:
      For those who followed my Halfling/Hobbit home build journal (Link here), you will know that I recently set myself the goal of building a series of display pieces throughout the year, to serve as scenic backdrops when photographing my miniatures.  Maintaining a build journal is my way of holding myself to account (I have a bad habit of starting and not finishing things). I took a short break following my last build to catch up on some unpainted miniatures, but I am now ready to get cracking on my next large project, an ancient ruin.
      Future planned projects include:
      Sewers Dungeon Adventurers Camp Industrial Complex Spaceship Graveyard Urban Trenches  
      With the Ancient Ruined Keep project looking to be the most complicated of bunch I have chosen to start that now, as I will be returning to work in a week or so and will no longer have a lot of free time, however after this project I have no set order planned, so if anyone has a preference as to what I should start next then I am happy to accommodate.
      Stage 1 - Casting the stonework.
      For this project I am going to be using 'Hirst Arts' blocks.  For those unfamiliar with Bruce Hirst he produces silicone molds that can be used to cast a wide range of highly detailed modular terrain blocks which can be glued together in endless configurations and designs.  The molds I will be using in this project are #704 and #708 (ignore the 3rd mould in the picture, I mixed up too much stone and so filled another none related mould to set aside for a future project as to not waste it).  In my last build journal I used Plaster of Paris to cast the small rockface, this time because of the size and potential weight of the build I opted for Dental Stone which is similar to Plaster but sets harder and is much more durable.
      I suspect given the size of the project, it is going to take me at least a day or two to finish casting enough blocks, so here are a few screen shots of the blocks to give you an idea of what I will be working with (its basically glorified stone lego for diorama builders ).

    • By Skrill
      Hi everyone,
      Here is my vignette featuring the Blacksting Wyvern hunting down a 500MD helicopter.

      This is a little project I had fun with recently.
      i painted the Blacksting Wyvern from Bones a bit more than a year back and was quite happy with it collecting dust on my shelf (original post: https://forum.reapermini.com/index.php?/topic/86236-blacksting-wyvern-speed-paint).
      Then, I stumbled across a 1/48 helicopter model I had almost forgotten about. 1/48th scale does fit nicely with 28mm heroic scale.

      The creatives juice started flowing and I decided to make a surprise encounter between the modern warfare machine and the legendary beast.

      I experimented as well with epoxy resin + food coloring for water, tree bark (for rocks), a couple of random 3D-printed broken statues/rubbles and toilet paper plaster for the terrain. I didn't have a clear acrylic rod for the flight stand, but wooden dowel painted black blends OK.
      I also forgot how much fun it is to build and paint plastic models. It is both similar and very different from miniatures painting.
      I'm quite happy with the result even though I could have been neater on a few places and it is a bit big for my light box.
      C&C appreciated

    • By Thrym
      We all keep knick knacks and trinkets to make things from in the future.  Whether it's some small bit, like dragon pendant I got from Salvation Army for 50 cents or some cardboard forms that hold tech devices in place that look like good buildings for Battletech.
      I wrote about Bottlecaps as bases a while ago.
      Recently, I found the plastic mounting bracket that's been floating around my bench and figured out what I wanted to start making.  I usually draw out what I intend to do, but the shape of the bracket defined its purpose.
      This compilation uses a bunch of various finds.  So towards that end, I am going to have a little contest.  
      Guess all of the items which I used in here and you will get a random Bones mini.  I will provide a numbered list and one clue because one SET is fairly hard to figure out.
      1. ______
      2. ______
      3. ______
      4. ______
      5. ______ Bracket
      Clue:  These odd pieces were disassembled from a triangular cap.

      The bricks are actual brick I bought off of Wish.  I got the standard bricks plus the square in gray and brick red.  I also have small triangles in brick red.
      The stone was split length wise so it was nice and flat. The terrain is a custom grind of bark, black walnut bark, dark cork and and coarse normal cork.
      The gears are from Michael's jewelry and findings section.  Some of the white on the terrain is baking soda mixed with super glue.
      Here's the piece primed...

      Stay tuned and enjoy.
    • By Rahz
      As an entry to @Glitterwolf’s painting Pandemic challenge I figured I’d try something a little different.  I printed up this scaled-down nurse from Silent Hill.  Plan is to have her with a wall that is flaking away (crackle paint is the intent here) and dirty tile floor.  
      a long time ago (I swore I had it bookmarked but alas...) I found a write-up by an individual who painted up some amazing veiny zombie skin using batting as a mask for the airbrush with the dark bruised colours going on first before adding the skin tone overtop.  Since I can’t find the reference, I’m going on trial and error and some fuzzy memory.  


      im going to have to be very careful with the cleaver as it is less than 1mm thick. 

      primed white and her dress was then covered with tape to minimize cleanup later. 

      A good vibrant purple (mix of warcolours Violet 5 and Vallejo game air alien purple). Never planned on painting a zombie purple before.  

      Then I hit it, using some batting that I teased and stretched out with Vallejo game air electric blue.  The right, her left, leg turned out better but it’s more splotchy than veiny.  I feel for the skin layer I’ll need a finer mesh (more space between) but thicker strands.  Will have to play with the batting to see what I can come up with.  
      Thinking of priming up a couple plastic spoons to try this on to see how things turn out before I attack her.  Hope to start some work on the base tomorrow night. 
      Thanks for looking.  
  • Who's Online   24 Members, 1 Anonymous, 46 Guests (See full list)

  • Create New...