Jump to content
Sign in to follow this  
Maledrakh

Maledrakh's Avatar and Abominations of Pride

Recommended Posts

Have some Pride!

Minis from the lovecraftian tentacled horror board game The Others: 7 Sins.

 

200814-the-others-7-sins-pride-group.jpg

 

The Avatar of Pride

200814-the-others-7-sins-pride-avatar-1.

Leonine and resplendant. Unashamed. All Out. Pride.

200814-the-others-7-sins-pride-avatar-2. 200814-the-others-7-sins-pride-avatar-3. 200814-the-others-7-sins-pride-avatar-4. 200814-the-others-7-sins-pride-avatar-5. 200814-the-others-7-sins-pride-avatar-6. 200814-the-others-7-sins-pride-avatar-7.

The largest of all the Avatars, the base is a pillshaped 65mm x 45mm.

 

The Abominations of Pride:

200814-the-others-7-sins-pride-abos-fron

200814-the-others-7-sins-pride-abos-back

25mm integral bases.

The Abominations of Pride are a further exploration of Contrast paints. And as it so happens, they are slightly reminiscent of rainbow stripes when on parade.  This is in fact unintentional but at the same time oddly fitting.

These were basecoated in a light cream colour, and then each was given a single coat of a different contrast paint.

From the left: Creed Camo, Space Wolf Grey, Wildwood, Militarum Green, Plaguebearer Flesh, Darkoath Flesh.

I then tried to drybrush them a bit, but the contrast paint came off in patches, not being strong enough to resist the mechanical rubbing of the bristles. *sigh* and here I thought I was being extra gentle.

So this reinforces the earlier lesson of no drybrushing on contrast paints.

I put some carroburg crimson shade wash on the ends of the limbs and tentacles, and later some thinned Mephiston Red regular paint. Eyes in blue, some teeth, black bases with black flockmix and done.

 

200814-the-others-7-sins-pride-conan.jpg

All that Pride, and not a shred of Dignity.

 

These are the last of all my The Others: 7 Sins minis. Now their to-be-painted-box in the shelf is all empty and hollow, ready to be filled by someting shiny and new! Time to prep some more of the HATE minis perhaps?

 

Avatar and Abominations of Pride

From the base game set of The Others: 7 Sins boardgame, 2016

Guillotine Games / Studio McVey / CMON

PVC boardgame plastic

The boardgame and some expansions should still be available in the wild but seem to be getting scarce.

  • Like 21

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Maledrakh
      Every so often, a model catches my attention. Sometimes because it is excellent and inspiring, sometimes because there is something off about it. Sometimes the model is both.  Here is one such example:

      Yeah, it is the angle of the buckler thats just wrong. It simply should not happen. It triggers my OCD.
      This is the "Gnoll Warrior" from the "Thank You pack" add-on in the second Bones kickstarter. During the kickstarter it was presented as a line concept drawing and as is usually the case, the resulting miniature ends up slightly different. Still a perfectly good representation of the original concept art, but anyhow.
      That said, I do understand that one-piece castability requires certain angles and alignments for the mould to work, and to get the detail in the shield to show it cannot be sideways in the mould. There have been plenty of examples of minis in strange poses and/or holding things at strange angles because of this.
      This Gnoll is also stylistically rather different from the other Gnolls Reaper makes in Bones, perhaps it's just not so comic-like?
      But I ramble.
      The other day as I yet again was perusing the Drawers of Doom™, I picked this one for the painting table. But first it got to meet Mr. Scalpel for a field amputation followed by a quick rotation and graft:
      One drop of superglue later the case of the misaligned buckler was solved.
      Add a base and some paint:

      Good thing classic Bones material is really easy to slice and reposition. Such an excellent material for convertions as well.
       
       
       

      Jagged white parallells of sharp fangs emerged into the campfire light, then a staring yellow eye. Inquisitive, roughly probing clawed fingers followed. Snorting, foul breath enveloped me, causing me to gag.
      It jerked its beast-like head back, loud barks of mocking laughter spraying spittle in my face as I tried to stand my ground.
         "I smell fright, little man", the gnoll rasped out at last. "Why's that parlay-totem here?"
       
      This mini was finished September 12th 2020.
       
      77388 Gnoll Warrior
      From the second Bones kickstarter 2013
      Reaper Miniatures
      Sculpted by Bobby Jackson
      classic white Bones PVC
      40mm base
      available from reapermini.com
    • By Maledrakh
      Nolzur's do make a few great monster minis, even though most -if not all- of their humanoid minis are too small, weedy and have too shallow detailing for my liking. Here is one:

      Yep, a dead head.

      50mm base.
      The main colour is Citadel Contrast Plaguebearer flesh, the rest is regular paint.
       
      This mini was finished September 12th 2020.
       
      Zombie Beholder
      Nolzur's Marvellous Miniatures, Wave 11 2020
      Wizkids
      I have no idea who sculpted this, as WizKids do not -as far as I know- publish this info.
      PVC,
      50mm base
    • By Maledrakh
      It has been a while since I painted anything. A combination of my arms acting up again and my just not feeling it. Call it the recurring fallow season.
      So I am getting back on track with some Orcs.  These are partly from the first Bones kickstarter and partly from the third. All together a nice band of 10.
      There are nine different orcs that are variants made on only two basic bodies, plus a singular warchief that I think fits in with the lot of them.
      I originally based them on 40mm round bases with sloped edges, the thinner-than-citadel knockoff ones. But there was always something not quite right about them, the bases were simply too large for the minis. So off they came. I ended up with making 37mm 3D-printed ones instead. I think they fit well on these minis.

      lots of pictures below

    • By Maledrakh
      Where several of the other Lost Valley dino-beasts have extra fantasy elements to them, such as extra horns. spiney ridges, a third digit on the vestigial front limbs and such, this one is just about picture perfectly based on a real dinosaur: The Carnotaurus.

       
      The Carnotaurus lived at some point during the Late Cretaceous period, that lasted from about 100 million to 66 million years ago. There have been found several fossils with bones and skin impressions that show scales, ridges and bumps in the hide. No sign of feathers though.
      The fossils are all found in South America, which was part of the supercontinent southern Gondwanaland when these critters existed.
      This is the only raptor-like predatory dino we know of that had horns on the skull, looking like very sharp eyebrows more than anything else really.

      This model was originally released in metal some years ago, which might explain the difference in design philosophy ("real dinosaur" vs "fantasy dinosaur"). Now it also exists in Bones Black in the Lost Valley.
       
      This mini was finished August 18th 2020.
       
      44080 Carnotaurus
      from the Lost Valley Expansion
      Bones 4 kickstarter, delivered 2019
      Reaper Miniatures
      Sculpted by Dennis Mize
      Made in Bones Black PVC
      65x35mm bespoke 3D printed base
      available from reapermini.com
       
    • By Maledrakh
      So, is this inspired by Megalania, or is it something else entirely?
      Megalania was a giant monitor lizard that lived in Australia up to about 50.000 years ago, and might have been about this size compared to a human. It did as far as I know not have a spiney ridge all down the back or horizontally along the tail.
      Or is this more of a Crocodilian precursor like Dynamosuchus Collisensis that lived a whopping 230 million years ago, at the very Dawn of the Dinosaurs? That one would be smaller though, and still not have the back- and tailspines.
       
      At any rate, Hornslasher:


      Painting beasts such as this is a doddle: black undercoat, heavy dark blue drybrush, then some darkish greenish ochre and assorted sandy, green, and some pale blue grey. Pale belly and undersides. Claws and teeth in offwhite. I did some electric blue dots on the face just to get some colour in. This is mostly a case of throwing some colour on here and there to hint of stripes or patterns in the hide, and then to just stop at some point. A very light dusty drybrush to unify a bit and done. Dark purply red and pink in the mouth.
      I based it similarily to the Enormous Crocodile I did some weeks ago, with a thin, oval base that was half "muddy waters" going the length of the body. 100x50mm 3D printed base, built up to the left hindquarters with some scraps of plastic and putty.

      Still large enough to be a serious threat to the denizens of the Lost Valley.
       
      This mini was finished August 18th 2020.
       
      44068 Hornslasher
      from the Lost Valley Expansion
      Bones 4 kickstarter, delivered 2019
      Reaper Miniatures
      Sculpted by Jason Wiebe
      Made in Bones Black PVC
      100x50mm bespoke 3D printed base
      available from reapermini.com
  • Who's Online   30 Members, 1 Anonymous, 33 Guests (See full list)

×
×
  • Create New...