Recently Browsing 0 members
No registered users viewing this page.
We are very excited to be able to come back and participate at ReaperCon again this year!
There are a ton of new releases that will be in-stock at the show and a couple of other special items.
Bombshell Miniatures presents the 2021 Golden Maelee Award. This is a Sponsored Award section of the annual Reaper Master Series Open Painting Contest. All entries will be awarded a Gold, Silver, or Bronze Bombshell Dog Tag depending on the level of painting and presentation of each entry. The brand new, larger, Golden Maelee trophies will be awarded to the top three paint jobs (Gold, Silver, and Bronze) depending on the number of entries.
Entries will need to feature at least one or more Bombshell Miniatures as the prominent subject. This can be anything from Babes, Sidekicks, KritterKins, to robots, or busts. Each entry will be judged on its own merit of painting execution, presentation, and skill.
Entries from artists who have been professionally commissioned by Bombshell Miniatures are ineligible for the Golden Maelee Trophy at this time, they may still receive Dog Tag awards.
We have some new ribbons. Come by our booth and receive our Bombshell ribbon for your visit.
You may receive one of the other themed ribbons depending on your purchase.
THE RESIN VAT
This year we will be offering seconds and mis-cast resin parts for sale by weight. Just scoop out what you want and we'll weigh it at check-out.
Although these castings didn't pass muster, you may find a gem that is just right for that conversion or terrain project down the line.
COUNTERBLAST FOR SAVAGE WORLDS
Over the past year we have been working on creating a setting book of our Counterblast game for the Savage Worlds RPG.
Come by our booth and get the details to sit in on a couple of impromptu RPG preview sessions during the con.
There may even be freebies involved!
We are super excited to visit with all of you again and we're looking forward to see what you've been painting!
Patrick & Vicky
Hey its buc. I have run games of Rangers of Shadowdeep at Reapercon and the Reaper online conventions. Is there enough interest for me to run Rangers of Shadowdeep at Reapercon in person this year? Would it be better to put my effort into Stargrave and or Frostgrave?
This one was for a facebook competition about color. The rules were, basically, don't worry about anything else but color. Do something different with color. I started with the idea of a dress palette of blue, teal, purple, and magenta. Once I had those colors in place, it was a matter of incorporating them in different areas of the model. I went with cotton candy roses and a galaxy print on the wings. The galaxy was a matter of stippling the dress colors (plus a bit of white) back and forth until the effect was convincing. Then I masked the body of the model and flicked a stiff brush at the wings to make star patterns. I then went back to the dress colors and stippling to blend them in a bit. This was a blast to paint, because I've never really done anything like this before.
Yes, a 2020 ReaperCon WIP! And a massive undertaking at that. I'm trying very hard not to nerd out and put this whole project into, er, Project. There's just so many pieces to keep track of, that maybe I'll just use this first post to keep track of things.
Some background stuff, starting with a quote from the "Paint a giant robot! Group WIP" where I wrote some of what's planned:
You can read the rest of that post here: Paint a giant robot post and a second one to see where I'm going with this: PLA print post in same topic
Biggest takeaway is that, while useful, my PLA printer can only do so much. I have a resin printer backed on Kickstarter, but considering it's now 3 years late, I don't think I should hold my breath on it ever showing up. Especially when I can get a new Elegoo Mars resin printer with more capability for relatively cheap (<$300). The PLA machine was bought with both hobby and household goals in mind, and it's served well. But the resolution just ain't there! More on that down the posts.
I also had the chance to gain some experience on paper plants at ReaperCon (Main post for that in the Terrain section post here: Vellum Paper Plants - Alien Jungle (WIP)
Basically, I have the scrap booking machine to make my own alien plants:
Which now leads me to this WIP. This is going to tie all those pieces together. The robot WIP will still be to get a good camo scheme, but that print job is not going to be used for the final diorama. Instead, that will be the resin printer's job. So, let's break down the WIP work that I can see so far, and will be edited later to add things and mark completions.
Tasks to be completed:
Wight (being pulled down backwards, caught by hidden lines) Gremlin Unit 01 (stole a supply crate and ran; actually just bait to get the larger CAV to follow) Gremlin Units 02 and 03 (trip line pair, successfully snagging Wight across the chest) Gremlin Units 04 and 05 (trip line pair, successful across another part of the chest) Gremlin Unit 06 (burner unit, cut Wight's left gun in two) Gremlin Units 07 and 08 (trap door unit, hiding entrance to jungle path with camo doors strapped to them) Gremlin Units 09 and 10 (trip line pair, successful across right thigh) Gremlin Units 11 and 12 (trip line pair, broken cable across chest, possibly falling over from sudden jolt) Gremlin Unit 13 (ECM unit, some large radar dish looking thing) Gremlin Units 14, 15 and 16 (cargo units, loaded up with stolen supplies and headed out) Gremlin Units 17, 18, 19, and 20 (gun units) Gremlin Units 21, 22, and 23 (missile units) Gremlin Unit 24 (large gun unit) Gremlin Unit 25 and 26 (junked units; scavenged for parts?) Gremlin Unit 27 (2nd style missile unit) Gremlin Unit 28 (personnel carrier unit)
Right Leg: cut from pelvis; reposition Feet: cut off both feet and swap positions since the tread is only on one foot Base: cut away from right foot, possibly keeping full base around left foot Left arm (maybe): cut gun into two pieces, having one falling to the ground after being cut by a heat lance/chainsaw rope
Details to be included
Camo doors at front leaving marks on the dirt path, but hiding the ambush from the main trail Pieces of old broken larger CAV units around Wight gun cut in two, maybe showing inner details. May have to 3D print an add-on piece Dust being kicked up by the stolen crate (going to try using dyed cotton) IN WORK One cable snapping dynamically, with several bends and twists (superglue on thread?) Multiple vehicle tracks around camp Campfire and tents for people A latrine Other camp details (laundry, chairs, sports equipment, bored carvings, etc)
Jungle Plants (V=Vellum cuts, B=bought, S=Sculpted, F=Found, P=Printed)
Large lotus flower like plants, but dry land and maybe odd colors with a large conifer cone growing from the middle (V) Jester hat plant (balls on stems around a central point) (V) COMPLETED Spiky yucca like plant (V) Jagged leaf plant (V) Tentacle plant (V) Tripod trees (three spoke trunks) (V) Large palm fronds (S) Coral like trees (P) Horn tree (lots of horn shaped leaves from a central trunk) (P, V) Ball vine (like ivy but with odd leaf shapes) (V) Cabbage-like jungle plants with large wrinkled leaves (V) Fuzzy vines (thin wire coated with static grass) (S) Anything I can buy from N/HO scale train setups and painted alien-ish (B) Reaper figures that can be clipped and painted to be plants (B) Odd trees with strange leaf shapes (onion shaped) (V) IN WORK Random grass-like jungle plants (V) IN WORK Stem ends from mandarin oranges (seriously, pull one off and look at it, stem towards the ground) (F) Anything and everything else (VBSFP)
Base mounting system
Design and print modular tiles with bristles on top (basically, Bristle Block toys) Allows mounting of all the above jungle plants Fill in around plants with thinned plaster via a syringe to create the ground surfaces
Who's Online 10 Members, 0 Anonymous, 20 Guests (See full list)