Jump to content
Sign in to follow this  
TheAuldGrump

3D Printing Patreons

Recommended Posts

8 minutes ago, Glitterwolf said:

 

Although the value is awesome for most, they don't disappear.

Not only will the items show up on MMF or a similar site later, more than often there will be some sort of sale so you can get it for a reasonable price later.

I have two or three at the same time at the most and then of course a KS and a Sale here and there.

I try to choose the ones of which I'm certain that I will print/paint it at some point and it need to fit my projects.

 

Even then, still not easy to resist.

In the end this is a luxury problem of course.

It's not helping that there are so many talented designers our there.

I sometimes look at my collection of files ( and my unpainted stash) and feel a little guilty about the sheer amount of files and minis.

I might never be able to paint them all during my lifetime.

But they're so cool!!!

Going by a survey I received, MMF is considering entry into virtual tabletops... finding another use for the models.

 

The Auld Grump

  • Like 1

Share this post


Link to post
Share on other sites
8 minutes ago, TheAuldGrump said:

Going by a survey I received, MMF is considering entry into virtual tabletops... finding another use for the models.

 

The Auld Grump

 

Virtual Tabletops?

How does that work?

 

 

 

Ooohhh @pcktlnt!!!

Cobramode November Set Preview.

3D files...

 

image.png.5182826fa288830d2719f054abb59505.png

Edited by Glitterwolf
  • Like 3

Share this post


Link to post
Share on other sites

So uh... make sure you repair the pre-supported succubus pose two from 3D Art Guy if you plan on printing it. Maybe the others too.

image.png.7b16a1125e799ec9036935b9e51e8e33.png

EDIT: If you can, 3D builder is having issues trying and Netfabb has a 100mb limit.

Edited by Illithar
  • Like 1

Share this post


Link to post
Share on other sites
5 hours ago, Illithar said:

So uh... make sure you repair the pre-supported succubus pose two from 3D Art Guy if you plan on printing it. Maybe the others too.

image.png.7b16a1125e799ec9036935b9e51e8e33.png

EDIT: If you can, 3D builder is having issues trying and Netfabb has a 100mb limit.

 

I always check for Island and supports.

 

How does one "repair" a sculpt with holes in it?

I do hollow big minis sometimes.

Share this post


Link to post
Share on other sites

you can try the formware online stl repair tool. 

I don't think it has a size limit, only a 4minute runtime limit. 

(If the file needs more than that it must have really serious issues)

No cost, no registration.

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites
12 minutes ago, Gadgetman! said:

you can try the formware online stl repair tool. 

I don't think it has a size limit, only a 4minute runtime limit. 

(If the file needs more than that it must have really serious issues)

No cost, no registration.

50MB limit. It said.

Share this post


Link to post
Share on other sites

I only dowloaded it this month, it said the lower body is a fixed file.

Maybe it's fixed, will ask the creator.

Share this post


Link to post
Share on other sites

I use Meshmixer to repair STLs when needed.  Meshmixer is also good be making cuts on models too large for your print bed, and making minor modifications and digital kit-bashing.

  • Like 2

Share this post


Link to post
Share on other sites
1 hour ago, Clearman said:

I use Meshmixer to repair STLs when needed.  Meshmixer is also good be making cuts on models too large for your print bed, and making minor modifications and digital kit-bashing.

 

I tried meshmixer a few times for cutting etc, but I can't figure out how to use it properly.

The interface is not my friend..

 

 

I asked the Creator.

 

image.thumb.png.5fed31da531e3ca76997fe36217f4be7.png

image.thumb.png.c65c70d6bf1294de94a79925076ad819.png

 

 

  • Like 1

Share this post


Link to post
Share on other sites
40 minutes ago, Glitterwolf said:

 

I asked the Creator.

 

image.thumb.png.5fed31da531e3ca76997fe36217f4be7.png

image.thumb.png.c65c70d6bf1294de94a79925076ad819.png

 

Yessik's Team is working on the file now, one of them was re-doing supports in the MMM discord server chat last week

 

  • Thanks 1

Share this post


Link to post
Share on other sites

From Discord:

 

Janeco - The Tapdancer Today at 12:07 PM
Summon?
okay so they are both pose 2
the modular and the one piece
one piece is being reviewed
modular is done but anyone has a problem talk to me as I did it

 

@Illithar which version are you having problems with?

 

 

  • Like 1

Share this post


Link to post
Share on other sites
8 hours ago, Glitterwolf said:

 

I always check for Island and supports.

 

How does one "repair" a sculpt with holes in it?

I do hollow big minis sometimes.

The 'holes' it is referencing are flaws or errors in the geometry itself. This can cause issue with slicing and printing that can lead to print failures. Lychee uploads them to NetFabb for fixing, 3D Builder in Windows, and Chitubox, also have repair functions. Although Chitubox does not auto-detect for errors, Lychee and 3D builder do.

 

1 hour ago, SamuraiJack said:

From Discord:

 

Janeco - The Tapdancer Today at 12:07 PM
Summon?
okay so they are both pose 2
the modular and the one piece
one piece is being reviewed
modular is done but anyone has a problem talk to me as I did it

 

@Illithar which version are you having problems with?

 

 

This is specifically the 'whole' or single piece version of the pre-supported file (the pose with the whip). The parted out bits also have issues, but Lychee/3D builder can repair them. The whole piece is too large a file with too many errors for anything to fix it.

 

EDIT: I did also mention the issue on 3D Art Guy's discord.

Edited by Illithar
  • Thanks 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...