Jump to content

Recommended Posts

IMG_20201111_115715_2.thumb.jpg.6ba697438976b9f85350ecc2251d423e.jpg

Printed on my Ender 3. Giant Scorpion from the Empire of Scorching Sands KS. Threading is a bit of a problem but I'm quite happy with the layer lines.

  • Like 7

Share this post


Link to post
Share on other sites

Nice!

You could cover threading damage wih sand/flock, it will be very believable for such a creature!

  • Like 4

Share this post


Link to post
Share on other sites

IMG_20201111_195345_4.thumb.jpg.ee23450e43b404cc38a89e936f389b93.jpg

Painted. The threads look worse in the photo than they are. I guess I'll reduce the temperature even further next time.

  • Like 3

Share this post


Link to post
Share on other sites

FINALLY, after 2 weeks of tinkering with the Photon S, I got a good print out of it:

 

125037495_712214203029753_2860415936310295460_n.png.477632916ff0cd2a613e2cbcb69e9bec.png

 

In order to get to this point, I did the following:

 

- Replaced the FEP
- Leveled the bed

- Replaced the FEP again

- Tuned the FEP

- Leveled the bed

- Tested the light

- Tested the LCD screen

- Replaced the LCD screen

- Leveled the bed (I think I can do this in my sleep now)
- Adjusted my slicer settings

 

It's been a long and frustrating couple of weeks trying to figure this out.

  • Like 9

Share this post


Link to post
Share on other sites

I'd say this one is great success for me. 

 

Velrock

Giant owl.

 

The grey stuff is mounting putty as the base can be removed for transport. 

 

My players enjoyed the encounter with these last Monday night.

1605221131748403854652593224602.jpg

16052211701463643901942925561803.jpg

  • Like 7

Share this post


Link to post
Share on other sites

We recently acquired an Elegoo Mars, and after a nervous 3 hours, our first resin print was removed from the build plate. Instead of printing the rooks, we decided to use Baby Yoda from the verse. The only flaw was  a "flap" mid way down the front of the robe. Resin used was Elegoo water washable.

 

I'll post a pic later tonight.

 

Reverend Shartan

Edited by Reverend Shartan
  • Like 5

Share this post


Link to post
Share on other sites

24 hours into having a printer this is what I've done not including the boat and duck as tests. Most were printed using standard or low quality settings with a 0.4mm nozzle.

 

Accidental mini gunslinger dwarf. So tiny it's hard to see even zoomed in.

IMG_8767.thumb.JPG.40051b951ed106b5b6d4754de861fd26.JPG

 

Upsized but still a bit too small gunslinger dwarf along with an Oathmark and Reaper min for size comparison. Ok quality but missing a bit of detail.

IMG_8765.thumb.JPG.5368e050ed2edf6aa0c881be39bad8bb.JPG

 

1/285 scale M4 Sherman. Broke it's gun off while showing him to the kids. Looks better in person.

IMG_8766.JPG.e64af7d733d2c0adddb01cdd74a16f3d.JPG

 

Catapult K2 printed using Fat Dragon Games Cura profiles for minis. Pretty good looking with almost no lines visible. Got 2 more mechs on the printer right now using these settings.

 

IMG_8764.JPG

 

2.5" long HMS Victory. The masts don't match the holes in the hull and I printed it at too low of quality. It's the only thing I've printed so far that I'm not happy with. Still a usable game piece but easily can do better.

IMG_8768.thumb.JPG.e3363ded4439882049c88b88dc176f91.JPG

 

Ulvheim ruins printed with a 1.0mm nozzle and lower quality settings. Pretty happy with this as I plan on printing everything I've found for Ulvheim. Need lots of ruins for different games. It took 1/4 of the time to print compared to the mech despite being 5-6 times more filament. I'm almost finished painting it as I wanted to know how bad the print lines would show up. They're visible but bearable for me.

IMG_8763.thumb.JPG.11081a8bf217945ec09adfa3c335965f.JPG

 

Overall very satisfied with the CR-6 printer. Just need to dial in the settings for different functions to find that happy balance between speed and quality. And buy more filament before I run out.

 

Edited by Zink
  • Like 7

Share this post


Link to post
Share on other sites

This is what I have been printing for the last month. Looter went half in with me on the AG kickstarter, so he gets first print of this guy and gets to put it together. I couldn't find my Sir Forscale so I got the Witch Queen out.

 

Tarrasque2.jpg.b9cde3f7cf1b4acad057f9cda85d0a40.jpg

 

Tarrasque.thumb.jpg.4f28ac860bea74f153be6a973602a339.jpg

  • Like 8

Share this post


Link to post
Share on other sites

Today I primed the mechs I've printed and took a group shot. For the time being I only want to print one more and he's heavily converted but nearly finished. Been a good lesson in using various 3D programs. 

 

IMG_8769.thumb.JPG.0f3b5234c700f20365aaf17641ec5fe8.JPG

 

Some painted ruins. The one on the left used the default Cura 1.0mm setting and the one on the right my heavily modified fast settings. The second one has a tiny bit more lines but prints almost twice as fast. Works for me for larger terrain. Need to get more filament before I can go crazy on ruins.

 

IMG_8770.thumb.JPG.db1d49c231ad79cde2b28dacbdd89d1e.JPG

  • Like 6

Share this post


Link to post
Share on other sites

Well, decided to see if I could get a print done despite the issues my printer has right now and... we have a success! Bonus points: this was also printed with supports 100% done by me, so that felt good to accomplish.

1352473095_IMG_20201121_233901_22.thumb.jpg.e1ea0e1b98e4a9724b56c91edb4c8ab7.jpg

Edited by Illithar
  • Like 5

Share this post


Link to post
Share on other sites
6 hours ago, Illithar said:

Well, decided to see if I could get a print done despite the issues my printer has right now and... we have a success! Bonus points: this was also printed with supports 100% done by me, so that felt good to accomplish.

1352473095_IMG_20201121_233901_22.thumb.jpg.e1ea0e1b98e4a9724b56c91edb4c8ab7.jpg

 

Awesome!

 

Also...she looks familiar, where is she from?

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...