Jump to content
Sign in to follow this  
Followers 0
Rob Dean

Simple enclosure

By Rob Dean, in Show off: Sculpts, Conversion, Terrain.

Recommended Posts

Rob Dean    14801

Rob Dean
Posted

I haven’t been feeling inspired this week; too much outside world creeping in, I suppose, but I did finish up one little scenery project for my “scenic bases” upgrade.  I got the Mantic Terrain Crate walls as part of the Kickstarter a while back.  They look well enough, but are very thin and there is no way they will stand by themselves on a table (to allow them to be reconfigurable).  I decided the thing to do with them was to group them into a couple of basic enclosures. Last fall I got a buch of irregularly shaped masonite scenery bases with beveled edges, so I sorted around to find ones that the rectangles of the walls would fit.

 

Having a bit of extra space at one corner, I planted a few trees to give it an organic feel.

 

Prince August true (small) 25mm figures are shown for a scale estimate.  These would be pretty petite walls against Reaper figures, I think.

 

F11FD4B9-8827-48B1-B597-84A31B774EF8.thumb.jpeg.4c824c236b8c193e3b4a688e574a1deb.jpeg

 

3B7EAF92-37CC-4E7A-9D09-9F3E30DF48EF.thumb.jpeg.90ae4e176863721ea4b2c1a6e40ceed0.jpeg

 

I considered adding crops or headstones, but decided that it was best to leave the interior fairly open to allow deployment of troops on 60mm square multiple figure bases.

 

  • Like 16

Share this post

Link to post
Share on other sites

Chris Palmer    25732

Chris Palmer
Posted (edited)

That turned out looking really super, Rob!

 

I didn't keep my Terrain Crate walls as I just couldn't get over how thin they were.  You managed to make them look great. 

 

 

Edited by Chris Palmer
  • Like 2

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
Sign in to follow this  
Followers 0
Go To Topic Listing

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • Punkfrog
      Dark Stones - The Cult Begins
      By Punkfrog
      New range of scenery by Hammerlot Games.
      Link: https://www.kickstarter.com/projects/hammerlot/dark-stones-the-cult-begins
       
       

       
       








    • Katiepult
      Mystic Circle #77556 & Sacrificial Altar #77630
      By Katiepult
      While I love painting miniatures, painting terrain pieces is also fun! I started these two this month and finished just yesterday. I’m considering getting these two pieces again and do a desert themed set.
       
       






    • SamuraiJack
      Mythological Monsters & Scenery, 3D Printable STL Miniatures
      By SamuraiJack
      https://www.kickstarter.com/projects/598293826/mythological-monsters-and-scenery-3d-printable-stl-miniatures?ref=discovery_category_newest
       
      Story
      Hello and thank you for taking a look at this campaign! I'm a digital sculptor from Germany and this is my first 3D related campaign. I'm excited to share my models with you!
      Mythology has always had a special place in my heart and I wanted to make something that others can be a part of as well! 
      This Kickstarter provides a range of popular mythological beasts, scatter, props and scenery for you to print at home on your 3D printer. Use them for your tabletop gaming, in your dioramas or paint them - it's up to you!
        Why digital files and no physical goods? I'm still somewhat new to the whole miniature scene so I don't feel comfortable enough to offer physical objects yet. This is something that will definitely happen in the future, once I had the time to establish more contacts and can assure great quality.
      What will you get? You will receive .STL files of the miniatures and props listed below. Additionally, I will be sharing tips for printing the models and my workflow in a PDF for trouble-free printing, which might be useful if you're still new to 3D printing.
      Check, check and check!
      All files have been checked for issues and test printed on my LCD resin printer Everything is prescaled for uniformity Tips for optimal printing & personal workflow as PDF included   Commercial license? Want to sell copies of the models online or in your brick & mortar store? No problem! Just choose the 'Commercial License' reward tier and you're good to go! Please note that this license only allows the sale of physical copies.
        This campaign includes a collection of popular mythological beasts. All miniatures were sculpted with great attention to detail that translates well into your 3D printed models. All minis come with their own base that fit on a standard D&D dungeon map. 
      The miniatures are prescaled for easier use and uniformity. Most monsters are 'large' so they're scaled two fit into a 2"2" square. Of course you're free to rescale them to your needs! 
      Here's a list of the monsters you'll receive:
      Basilisk (large) Cerberus (large) Cockatrice (small) Cyclops (large) Fenrir (large) Hippocampus (large) Pegasus (large) Sphinx (large) Unicorn (large) Wyvern (large)  Photos of the printed miniatures can be found further down the page!
          This pre-prepared version of the wyvern allows you to print it BIG! It is sliced into 5 pieces and keyed for easy assembly! Prescaled to around 23 cm (ca.9 in), this wyvern is a real eyecatcher. 
        Photo of the printed, assembled and primed Wyvern The Wyvern was printed on an Anycubic Photon S It measures about 23 cm (ca. 9 in) in length
    • Lidless Eye
      Lidless Eye Hobbies: Scatter Matters!
      By Lidless Eye
      I've been waiting to post this until I have enough, but I've just been working on random pieces of scatter terrain in between other projects.

      Any 3D printed parts are done on my Creality Ender 3.

      Trees from EC3D
      .
       

       
       
      Trees from Dark Realms


       

      Barrel, +3 Barrel of Sundering (Warhammer props)
       

       
      Wood bundle, Alchemist's Table and Shelf from Vae Victis, I've honestly forgotten who the other designs were from.
       


      "The beacons are lit!  Gondor calls for aid!"

      Beacon Tower from RMPrintables




      Lounge Chair from Impact! Miniatures, awning from Warhammer, weapon pile from The Hobbit, treasure piles from Reaper Miniatures.



      Fantasy Objective Tokens by PhysUdo on Thingiverse.

       


      Ogre Totem from Warhammer, Town Fountain 3D print from unknown, Alchemist's Wares & Firestick Bundle from Vae Victis, Sandbags by MegaBlox, one tree/odd plant is an old Marauder Giant club and the other is from a Gandalf action figure.

    • KruleBear
      Toll Booth / Guard House 3D print
      By KruleBear
      This is the Guard House / Toll Booth from Kiernan Billings’ Wizards Tower Expansion Set. IIRC this was printed at a 150 micron layer height using my Anycubic i3 Mega printer. I tried smoothing out the print ridges using Polycrylic before priming. It didn’t seem to make a difference on the print lines. 
       
      This is a two piece print (building and roof) with a simple paintjob of dry brushing, washes, and matte coating. I think it turned out great for the game table. If I wanted something for display, I think I could get the quality necessary on my UV resin printer at higher resolution .  The photo doesn’t show the bluish purple of the roof very well, but this is generally a good representation of the work. I have not decided if I will permanently attach the roof or not. 
       


       
      Now I need to paint the couple dozen pieces I have printed of the Wizards Tower and Bridges. 
       
      C&C welcome.
       
      -Mike

  • Who's Online   24 Members, 0 Anonymous, 34 Guests (See full list)

×
×
  • Create New...