Recently Browsing 0 members
- No registered users viewing this page.
By Grumpy Cave Bear
I haven't done a WIP in quite a while, and I want to keep committed to clearing my Shelf of Shame for the year. So here's an unfinished mini from my shelf: Reaper 77108: Shadow Dragon:
I had assembled & primed this mini before, but hadn't painted it, so it sat on my shelf for a while. So two nights ago, I washed it, sprayed Stynylrez black primer over it, then sprayed a base coat of Burgundy Wine.
...and that's where it stands. Hopefully, I have an opportunity for more work tonight.
I don't have any ideas at present for what the color scheme will be, save that I want it to be purple.
(Now a 2022 WIP)
Yes, a 2020 ReaperCon WIP! And a massive undertaking at that. I'm trying very hard not to nerd out and put this whole project into, er, Project. There's just so many pieces to keep track of, that maybe I'll just use this first post to keep track of things.
Some background stuff, starting with a quote from the "Paint a giant robot! Group WIP" where I wrote some of what's planned:
You can read the rest of that post here: Paint a giant robot post and a second one to see where I'm going with this: PLA print post in same topic
Biggest takeaway is that, while useful, my PLA printer can only do so much. I have a resin printer backed on Kickstarter, but considering it's now 3 years late, I don't think I should hold my breath on it ever showing up. Especially when I can get a new Elegoo Mars resin printer with more capability for relatively cheap (<$300). The PLA machine was bought with both hobby and household goals in mind, and it's served well. But the resolution just ain't there! More on that down the posts.
I also had the chance to gain some experience on paper plants at ReaperCon (Main post for that in the Terrain section post here: Vellum Paper Plants - Alien Jungle (WIP)
Basically, I have the scrap booking machine to make my own alien plants:
Which now leads me to this WIP. This is going to tie all those pieces together. The robot WIP will still be to get a good camo scheme, but that print job is not going to be used for the final diorama. Instead, that will be the resin printer's job. So, let's break down the WIP work that I can see so far, and will be edited later to add things and mark completions.
Tasks to be completed:
Wight (being pulled down backwards, caught by hidden lines) Gremlin Unit 01 (stole a supply crate and ran; actually just bait to get the larger CAV to follow) Gremlin Units 02 and 03 (trip line pair, successfully snagging Wight across the chest) Gremlin Units 04 and 05 (trip line pair, successful across another part of the chest) 2/27/22: Too busy; cut Gremlin Unit 06 (burner unit, cut Wight's left gun in two) Gremlin Units 07 and 08 (trap door unit, hiding entrance to jungle path with camo doors strapped to them) Gremlin Units 09 and 10 (trip line pair, successful across right thigh) 2/27/22: Too busy; cut Gremlin Units 11 and 12 (trip line pair, broken cable across chest, possibly falling over from sudden jolt) 2/27/22: Too busy; cut Gremlin Unit 13 (ECM unit, some large radar dish looking thing) EDIT: Maybe use older model (2018 or 19 ReaperCon entry) Gremlin Units 14, 15 and 16 (cargo units, loaded up with stolen supplies and headed out) 2/27/22: Too busy; cut Gremlin Units 17, 18, 19, and 20 (gun units) 2/27/22: Too busy; cut Gremlin Units 21, 22, and 23 (missile units) 2/27/22: Too busy; cut Gremlin Unit 24 (large gun unit) 2/27/22: Too busy; cut Gremlin Unit 25 and 26 (junked units; scavenged for parts?) 2/27/22: Not going to be a permanent camp, so no junkyard Gremlin Unit 27 (2nd style missile unit) 2/27/22: Too busy; cut Gremlin Unit 28 (personnel carrier unit) 2/27/22: Too busy; cut
Right Leg: cut from pelvis; reposition Feet: cut off both feet and swap positions since the tread is only on one foot Base: cut away from right foot, possibly keeping full base around left foot Left arm (maybe): cut gun into two pieces, having one falling to the ground after being cut by a heat lance/chainsaw rope
Details to be included
Camo doors at front leaving marks on the dirt path, but hiding the ambush from the main trail Pieces of old broken larger CAV units around 2/27/22: No longer a permanent encampment Wight gun cut in two, maybe showing inner details. May have to 3D print an add-on piece Dust being kicked up by the stolen crate (going to try using dyed cotton) IN WORK One cable snapping dynamically, with several bends and twists (superglue on thread?) Multiple vehicle tracks around camp Campfire and tents for people A latrine Other camp details (laundry, chairs, sports equipment, bored carvings, etc)
Jungle Plants (V=Vellum cuts, B=bought, S=Sculpted, F=Found, P=Printed)
Large lotus flower like plants, but dry land and maybe odd colors with a large conifer cone growing from the middle (V) Jester hat plant (balls on stems around a central point) (V) COMPLETED Spiky yucca like plant (V) Jagged leaf plant (V) Tentacle plant (V) Tripod trees (three spoke trunks) (V) Large palm fronds (S) Coral like trees (P) Horn tree (lots of horn shaped leaves from a central trunk) (P, V) Ball vine (like ivy but with odd leaf shapes) (V) Cabbage-like jungle plants with large wrinkled leaves (V) Fuzzy vines (thin wire coated with static grass) (S) Anything I can buy from N/HO scale train setups and painted alien-ish (B) Reaper figures that can be clipped and painted to be plants (B) Odd trees with strange leaf shapes (onion shaped) (V) IN WORK Random grass-like jungle plants (V) IN WORK Stem ends from mandarin oranges (seriously, pull one off and look at it, stem towards the ground) (F) Anything and everything else (VBSFP)
Base mounting system
Design and print modular tiles with bristles on top (basically, Bristle Block toys) Allows mounting of all the above jungle plants Fill in around plants with thinned plaster via a syringe to create the ground surfaces
Reaper Challenge League 2022
2) How It Works
3) Types of Challenges
4) The Raffle
PDF Check List Discord
Welcome to the Reaper Challenge League (RCL), a system that rewards fans for completing community-based events and challenges. This will all be conducted via the Reaper Miniatures Discord, where there is a system in place to track points and administer raffles easily (see below).
THIS IS NOT A CONTEST ----- This is meant to be a challenge against yourself to see what you can accomplish, not a contest to compete in against other people in the community. So enjoy your time in creating stuff and have fun doing it with everyone else!
Only Reaper minis will be accepted except for in the Freebie/Bust categories. You can use any paints for submissions, the only exception is the Limited Palette challenge.
How It Works:
Users can submit photos of RCL projects on the #submissions area on Discord and receive points depending on the tier of challenge.
These points can then in turn be used to purchase raffle tickets which will be drawn quarterly, with a large annual raffle at the end of the year. Only Reaper minis will be accepted for submissions, except for in the Freebie/Bust categories. You can use any paints for submissions, the only exception is the Limited Palette challenge. Each quarter, a RCL raffle shall be held during the last seven days. This ensures that people have ample time to enter tickets or finish any entries so your points may be exchanged into tickets. On the last day of the quarter, the raffle will be drawn, and winners posted. At the end of the year a larger raffle will occur that accounts all accrued points points you have earned yearly (spent and unspent). Terms and Conditions may change at the discretion of Reaper Miniatures at any time.
Type of Challenges:
All entries must show some sign of trying and not just throwing paint on to get some quick points. In keeping of the spirit of the league, challenge yourself and see what you and others are capable of. The amount of points that each one challenge will grant are in the () below, as well on the PDF for the 2021 chart. Reaper Challenge League PDF
The raffle will happen the last 7 days of each quarter, This will ensure that people have ample time to enter their tickets or finish any entries they need to complete before drawings. Tickets will be pulled on the last day of each quarter!
This will all be done on the Discord server, as we have a bot that is programmed to keep track of members points and how many tickets they have. We will use this bot to open the drawing and for you to enter and participate with the system. The drawing will stay open for one week before doing the drawing on the last day at a set time!
Thank you, the team!
Reaper Challenge League PDF
Frequently asked questions
Q: I am just wondering if one model can be turned in for two different categories?
A: In the spirit of the challenge, we would like it if you submitted a different model for another challenge. As this isn't a contest and meant to get people hobbying. 🙂 so you would just be doing yourself a dissatisfaction!!!!!
Q: Since the Reaper Discord moves so insanely fast, how will winners be notified?
A:There will be a channel that is static that is read only, for raffle winner and other announcements.
Q: Will the raffle draws be things that can survive through colder climates when shipped?
A: Not to sure on the exact prizes but this ties into your third question, I can hold things for you if cold climate is an issue and ship it at an opportune time.
Q: For the Quarterly holiday - what are you looking for for Q1? Like would just, any winter/snowy model be ok, or do I need to figure out what a MLK day themed model would be? 😜
A: The rules are very loose, as this is not a contest and is meant for you and others to hobby!!!!!! So if you think its a holiday or a special day? By all means paint something and present it under that challenge category, as long as you spent time and effort into making it, I will recognize it. As an example if you wanted to paint something that was for your birthday! i'll count that!
RCL 2021 udated list! - Sheet1.pdf
As you can see from the title, I'm a noob playing around with layering. Or glazing? I'm not sure about the difference, in the tutorial videos I watched, both techniques come down to painting diluted paints over a base coat.
I've painted the armor with a black-and-silver mix, then painted over with diluted silver where I imagine the light hits. I'm happy with the effect. I feel like I've messed up the face. I layered Vallejo Paint Bronze Fleshtone (over that color + white) to simulate shade from the helmet, and tried to pain the eyes gold because she's depicted with glowing eyes in the official artwork. I think I should just have gone for skin-wash... I hope I can salvage it. I also see now that I haven't been thorough with removing the mold lines and messed up the gold detail somewhat.
I'm a bit unsure about what to do with the hair and, well, whatever you call this piece of clothing.
I painted shades on the lower part of the hair, in the areas where multiple layers of cloth overlap and on the right where the wing is above it. I just glazed over with a red + black mix. I'm kind of going back and forth thinking that it looks too dark and smudgy, and (especially on the front) not dark enough. I'm also unsure if I should add highlights or shades on the wavy part. It's relatively flat, and most tutorials I've seen deal with robes that have very deep folds.
I definitely want to add highlights to the hair, but I don't know what color. Mixing red and white would give pink, and that doesn't seem right. I tried glazing with orange, but wasn't happy with the result, so I glazed over with red again. It's still slightly visible.
Some other minor detail, I've tried to paint the shadow of the body on the base of the wings. Not sure I like it, but you only see it when you go looking for it anyway...
One more picture that I took, can't really think of any commentary.
Any advice on layering or any other things is very welcome!