Jump to content

Recommended Posts

This one is next in line.  He needs a better base.  
 

5A6A87FD-2D56-4C40-B6AE-18B4A63C190D.jpeg.04a578110a405f3edc9023bd19d7ddf2.jpeg
9F1365F7-C4E5-428F-BCC9-96A3A15DEAEC.jpeg.b0768b08ad1881bc0880061b0ab09c0f.jpeg

352EB27A-69AD-405A-ADF8-D03E34995714.jpeg.c79d12544e98fab7471f3c0cbfceb08e.jpeg

05080C43-FB99-4136-9072-24E1A4E36038.jpeg.eb0a00275787192a8e2412540d097701.jpeg

 

This is a standard Reaper 1 inch base.  And a sheet of embossed styrene cobblestone, for model railroading.  I superglued it on, trimmed around it with an X-Acto, then sanded it down to 800 grit.  Any gap left is going to get the Brush On Sealer treatment to deal with the seam.  After this I just superglued the Mocking Beast on.  No pin.

  • Like 7
Link to post
Share on other sites
  • Replies 16
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

6 hours ago, KruleBear said:

I am impressed you were able to clean up the ugly mold line that runs across the teeth on this Bones model. 

Yeah, they are in a good orientation for the scalpel.

 

8F37E482-2016-4A3C-8C87-D335B49F372F.jpeg.e73598f234ab37de0f666b5da348e518.jpegE3562B01-9150-4E96-A731-F2C3DE4C6E01.jpeg.490aa319f791ea6bbe0ddd32f72c2c9c.jpeg
 

NMM Gold Shadow on the coin pile.  Lined the wood with Walnut Brown.

  • Like 8
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Inarah
      Venomous Flowers by PrintYourMonsters.  These are 3d resin prints.  Of course, they might also be only harmless spring flowers on some sci-fi world. 
       

       
      The smallest one is a bit over 1" across, the largest is taller than a humanoid figure.  Overall I've been very happy with the Plants and Rocks files. 
       
    • By Darcstaar
      I only saw one thread about crackle paste when I searched these forums.
       
      So, I’m going to share how it’s going for me.
       
      I started with washed and dried 1” and 2” Reaper Bases.
       
      I put this garbage on a 2 inch base first.

      Don’t buy it.  I got it at Hobby Lobby at the time because they were out of Folk Art.
       
      To be clear, this is Crackle Medium.
      It is meant to be painted on a primed or rough surface I guess, and painted thin. I put it on kind of thick.  It didn’t crackle at all!
       
      So, I got a tub of this stuff on Amazon.

      The directions state “put over a thin layer of PVA glue.”  Pfft, who has time for that extra step?
       
      Here is the result on a washed but otherwise un prepped set of bases.

      1 inch
       

      2 inch.
       
      Lousy!
      So, the surface needs something for crackle paste to work right.
       

      This is a 1” base with a thin layer of PVA glue.
       

      This is a 1” base with just hitting it with 220 grit sandpaper and washing it again.
       
      I also used the 2” base with dried crackle medium on it.  Not pictured.

      This is a 2” base covered in black brush on primer.

      Here is the result on the 2” base over dried crackle medium.  It was hard to get the stuff into a uniform layer, as the medium created a very hydrophobic surface, so the paste slides around too easy.
    • By Darcstaar
      Taking a hiatus on the Mocking Beast.
      Trying to gain some victory in numbers on my Bonesium Horde.  I have completed the beetle swarms, spider swarms, and skeletons without WIP. 
       
      I’m going to do the goblins now.  I plan two batches: one yellow/ochre, and the other tangerine.  Some nice “non-Greenskins.”
       

       
      Several of these required boiling.  Some are still leaning.  The spears are straighter.  One of these was the beneficiary of a weapon swap.  I had given Danar, Male Assassin 77030 his shield for a spiked shield.  In return, we have a dual wielding goblin!
    • By Toben
      The finished version of the mini WiP I was sharing earlier today.
       
      I tried to use washes and played with basing this time around.
       
      Any suggestions would be great as I don't feel as proud for this one as I did the Dark Chronicler Astrid I did back on May.


    • By Inarah
      "Starting with the latest expansion to the GURPS Action series (see Warehouse 23), your pledge of $3 secures you a PDF copy of GURPS Action 8 - Twists. This 10-page PDF, written by Sean Punch, aims to shake things up. "
       

       
      https://www.kickstarter.com/projects/warehouse23/steve-jackson-games-gurps-2021-pdf-challenge?
       
      10 PDFs for as little as $3 seems like a deal. 
  • Who's Online   18 Members, 2 Anonymous, 37 Guests (See full list)

×
×
  • Create New...