Recently Browsing 0 members
No registered users viewing this page.
And here is more terrain from brinewind/brinewind extras. The Mermaid bar does not sit flush, although it doesn't fall over. I should have had more patience and boiled/froze straightened it.... but more minis for the table! These practically painted themselves - I was a bit sloppy with the OSL, but time was running out...
A thin disk of felt on the underside of the masts of Sophie's Revenge, and other strategies to paint this beastBy Pancakeonions
I am stunned at my recently arrived Sophie's Revenge, and so excited to get it to the painting table (I will have to significantly reconfigure my painting space to ensure I have enough room... As well as buy LOTS of new brown paint, ha!) It is a thing of beauty, even without a lick of paint on it.
One of the first things I noticed was how the magnetized masts SNAP to the deck, hard. That's what you want, so they'll stay firmly in place. But when you remove 'em, they'll likely scratch the heck out of the painted deck. So I plan to cut disks of black felt to glue to the underside/ magnet-side of the masts, so that when they stick, they're more gentle. Thin felt should not affect how they stick, but it should make a big difference on the ship's wear and tear.
Are you planning on painting yours? What strategies are you going to adopt to make it as beautiful as you can, while still keeping it sturdy as a plaything for your RPGs, wargames, or maybe even little kids (don't judge! mine are gonna be all over this thing!)
So for awhile now I've had this goal, nay, this desire, nay, this primal compulsion to build a boat. It is not enough to have hand drawn maps, or 2D terrain tiles. I need a fully functioning 3D boat! Well, maybe not fully functioning. But I want to build a cool boat!
I've been working on a nautical campaign full of swashbuckling, sailing, and sea monsters for a few years now. It's my White Whale project. Always just on the horizon. It'll happen some day, but in the meantime, I have a million small projects to complete and extend the chase. One of which is my desire to build a few different sized ships to enliven any possible naval combat.
I actually attempted this about two years ago, just winging it and making some measurements and throwing them at some craft supplies. I wanted a cheap option that wasn't too difficult to repeat that way I wouldn't be discouraged from making multiple ships. So I limited it to cheap crafting materials like foamcore, wooden dials, popsicle sticks, and thumbtacks. And the result wasn't bad. Especially for my first attempt at any kind of terrain building.
It actually turned out rather nice! To my surprise. But I got hung up on mast and sail designs and never finished.
The wood on the deck had 2x1in grid carved into it for easier D&D use.
and the figurehead was designed to be modular.
However, overtime the boat collected dust and little scratches. I should have given it a coat of mod podge or sealant of some kind, but never did. And eventually it had an unfortunate run in with an injured owl that we took in for a night.
Here's the little devil himself.
Anyways, I put this project on the back burner for long enough and feel inspired to dive back in. Especially with a certain Bones ship on the Horizon that I'm still on the fence about getting. I was doing some browsing on the web and recently found this wonderful little blog complete with loose instructions and a plan from a now defunct wargamming site. The blog creator had found the old plan and adapted it to build something using most of the same materials I have already stockpiled.
There's a few choices that I like better than my first attempt so I think I'm going to use this as some inspiration as I give this boat thing another go.
My hold up now is still those darn masts. The original plan above used wood and required drilling out holes for the masts. The blogger use foam for his ship and found random bits of tubing to house his masts. I could try to find something random like that, but I was hoping to find something simpler for easy repetition. And I would also like to keep the masts loose so they can be removed for easy storage, or to swap out the sails. Any thoughts?
Any resources, tips, recommendations are very welcome! I'll post back here with any updates.
My birthday is imminent (precioussss), and my husband gave me this resin ship model from German manufacturer Gelaendestuecke.
I've never done anything like this before: Never worked with resin, never made a ship model, never tried to figure out rigging and sails (they aren't included in the model and even the masts are just dowels at the moment).
So ... Woohoo, I have no idea what I'm doing. But I figure it'll be fun figuring it out.
Here's the box
And the instructions in their entirety
The hull and the deck
The wooden bits, the mast, bowsprit, and railings
The cabin has a few issues. Note the little spot the arrow points to. That becomes relevant later.
It also has a big missing spot from a bubble in the back
And a crack and missing piece on one side
Okay, so here's how I've begun it.
First I scrubbed the resin pieces with a toothbrush in very hot water and dish liquid. There was a nasty waxy substance under the hull which I assume is mold release.
Once cleaned, the bottoms of the pieces were really shiny, which seemed like it would cause a problem with the epoxy adhering.
But sanding resin is problematic. Its dust is very fine and lightweight and highly toxic. Bad stuff to breathe.
So I sanded them underwater, with a few drops of dish liquid add to break the surface tension so the dust wouldn't float on the water. Resin really wants to float.
Sanding on the cabin exposed a greasy, waxy white substance where that little splodge was, something like a white oil pastel, and kind of gross.
Scraping it out exposed more of it within the resin and lost a few flakes of the surface. It can be seen, rather big in this picture of the ship as it is at present.
And here's a side view.
I started putting together one of the ships I got from Renaissance games pirate kickstarter. I ended up with 7 ships, and this is the 2nd one I have assembled. Well started to assemble. It's been over 2 years so figured I would give it a go.
Rensissance games is sadly no more. This is s great kit. It was $190.00 during the kickstarter.
It it comes with 24 cannons. I think I will paint the cannons bronze.
this is about 5 hours into it.
Who's Online 16 Members, 2 Anonymous, 30 Guests (See full list)