StarFyre Posted April 20, 2022 Share Posted April 20, 2022 3 minutes ago, Cyradis said: I had a look at the Bones You'd Like to See to compare to the offerings. Fae, ants, bee-people - check. Doing okay there. What is something regularly asked for that is generically lacking? More female sculpts to match what the male characters get. More active poses, more armor. more monsters. i see ppl asking for that on the facebook groups and the kickstarter chats. But the types of monsters varies. some asking for more rare monsters. others want newer versions of cool classic monsters. Sanjay 4 Quote Link to comment Share on other sites More sharing options...
Sirithiliel Posted April 20, 2022 Share Posted April 20, 2022 (edited) 9 minutes ago, StarFyre said: well thanks. seeing the resin master, didnt notice that. now that you mention it, it looks strange. i checked my larger resin dragons (forgeworld, some garage kits, etc) they all have it in their wing structures.... now this anni dragon looks strange to me 😞 so i may not get that either. Thanks alot Siri 😛 😛 Sanjay Oh noes ,I'm sorry! But the good news is that it can be green stuffed in. I've done it many times Drill a hole in the wrist and one in the shoulder at the front of the wing arm, pin a wire in there, then green stuff from the wire to the plastic arm Edited April 20, 2022 by Sirithiliel 4 Quote Link to comment Share on other sites More sharing options...
StarFyre Posted April 20, 2022 Share Posted April 20, 2022 12 minutes ago, Sirithiliel said: Oh noes ,I'm sorry! But the good news is that it can be green stuffed in. I've done it many times Drill a hole in the wrist and one in the shoulder at the front of the wing arm, pin a wire in there, then green stuff from the wire to the plastic arm oh of course. but the question then becomes, do i care enough about the design to want to bother modify/enhance it... sanjay 3 Quote Link to comment Share on other sites More sharing options...
Inarah Posted April 20, 2022 Share Posted April 20, 2022 10 minutes ago, Sirithiliel said: Oh noes ,I'm sorry! But the good news is that it can be green stuffed in. I've done it many times Drill a hole in the wrist and one in the shoulder at the front of the wing arm, pin a wire in there, then green stuff from the wire to the plastic arm But +/-1000 people should not have to greenstuff part of the model that should have been sculpted, and can be fixed before it gets into production. Many won't try, even if you say it is easy. Far easier to fix it now, before it ever gets made. Thank you for catching that mistake so something can be done about it. Now, has anyone seen today's social medial goal anywhere? 3 1 Quote Link to comment Share on other sites More sharing options...
Sirithiliel Posted April 20, 2022 Share Posted April 20, 2022 1 minute ago, Inarah said: But +/-1000 people should not have to greenstuff part of the model that should have been sculpted, and can be fixed before it gets into production. Many won't try, even if you say it is easy. Far easier to fix it now, before it ever gets made. Thank you for catching that mistake so something can be done about it. Now, has anyone seen today's social medial goal anywhere? oh i fully agree. it was in the concept art, it should be on the model. The rest of the model is very close to the concept art, which makes this omission all the more glaring so i hope it can be added in so it properly matches the art we were shown, i just am not sure where to voice this becuase it hasn't been posted in the actual kickstarter updates 5 Quote Link to comment Share on other sites More sharing options...
haldir Posted April 20, 2022 Share Posted April 20, 2022 The wings don't bother me at all, the oval base is what I don't like. Sometimes concept art isn't followed all the way. I've seen numerous times where the art is shown & looks awesome & the figure comes out different. Thou this time, I have no idea why it wasn't added. The sculpt is pretty much the same, minus the missing membranes. I am not a fan of the oval base style. It's just look off when you compare it to long standing square & round base styles. As I said before I'm hoping that it's not attached & can be used or not. DD looks promising, I hope we get to see what that one all has in it. Hakir, I like Egyptian themed minis, but I rarely game in the setting. I think the last time I did was when I tried to run the 1e Pathfinder Adventure Path on here as a play by post. I generally use Arabian Nights stuff vs Egyptian, if I head into the desert. I do hope we see what this one has in it as well. It would be nice to see more female figures. Reaper used to be more equal when it came to offering both sexes when it came to minis. that has changed in the last couple of years. 9 minutes ago, Sirithiliel said: oh i fully agree. it was in the concept art, it should be on the model. The rest of the model is very close to the concept art, which makes this omission all the more glaring so i hope it can be added in so it properly matches the art we were shown, i just am not sure where to voice this becuase it hasn't been posted in the actual kickstarter updates Ron posts in the KS comments all the time. probably be best to post there. If your post isn't answered post again till it does. Just look at the "not-Bahamut" dragon & how bad that one came out after what we were shown. Does Reaper really want anther one of those dragons on their hand? 4 Quote Link to comment Share on other sites More sharing options...
Chris Palmer Posted April 20, 2022 Share Posted April 20, 2022 (edited) 9 minutes ago, Sirithiliel said: so i hope it can be added in so it properly matches the art we were shown, i just am not sure where to voice this becuase it hasn't been posted in the actual kickstarter updates Yes, it was the main feature of Kickstarter Update #30. So you should be able to comment there. Edited April 20, 2022 by Chris Palmer 4 Quote Link to comment Share on other sites More sharing options...
amuller33 Posted April 20, 2022 Share Posted April 20, 2022 (edited) Id like to see more Female monsters. Not nymphs/Sirens or half nekkid Succubi (my apologies to Sophi) but run of the mill Monster manual 1 typers that everyone uses but there is a lack of female monsters goblins/orcs/Trolls/minotaurs/undead etc. I have 6000 minis but I'm always searching when it comes to female. There are SOME but just not enough variety and choices... and please NO CHAINMAIL BIKINIS need apply. Make an expansions of this and Id by 10. BTW after posting I search for Bones and females Giants and Half orcs DO show a fair number .... so OK those two races are represented AJ Edited April 20, 2022 by amuller33 double post 10 3 Quote Link to comment Share on other sites More sharing options...
Glitterwolf Posted April 20, 2022 Share Posted April 20, 2022 On 4/18/2022 at 10:52 PM, StarFyre said: i just need cool monsters. unique stuff. stuff that doesnt exist out there already. Bones 5 catoblepas was so cool. i dont think there's ever been a mini of one. Then the slaad (although now there are some cooler looking 3d patreon versions), etc. at least for some of us, thats whats missing sanjay EPIC has this ( 3D STL File to be printed) And Roleplaying Miniatures has this ( Also 3D STL file for printing) I do have that Epic one 2 Quote Link to comment Share on other sites More sharing options...
BlackCatHobby Posted April 20, 2022 Share Posted April 20, 2022 I'm really on board with both Hakir and DD. A mighty need for that giant slug has me in its slimy grip! DD is the first expansion that I know I want with only one unlock visible. I'm pretty sure that as Hakir is fleshed out I'll be in for that too. Still not feeling the core set though, its a great deal but not for me. 5 Quote Link to comment Share on other sites More sharing options...
Sirithiliel Posted April 20, 2022 Share Posted April 20, 2022 11 minutes ago, haldir said: Ron posts in the KS comments all the time. probably be best to post there. If your post isn't answered post again till it does. Just look at the "not-Bahamut" dragon & how bad that one came out after what we were shown. Does Reaper really want anther one of those dragons on their hand? oof yea. i was very dissatisfied with that one. I heavily, heavily resculpted mine. Re-did the legs, made new horns, remade all four feet, sculpted in the propatagium, remade the face entirely. i would have redone every scale if i had had the energy 5 Quote Link to comment Share on other sites More sharing options...
StarFyre Posted April 20, 2022 Share Posted April 20, 2022 3 minutes ago, Glitterwolf said: EPIC has this ( 3D STL File to be printed) And Roleplaying Miniatures has this ( Also 3D STL file for printing) I do have that Epic one not bad. but now i have the bones one so im good 🙂 i'll say it again. some folks posted an Ormyrr. havent heard of that monster in many years, but that would be nice. most newer players probably have never heard of it. more beholder kin versions the slaadi lords primus thesselhydra etc so much stuff that no ones made (at least not good) models of. sanjay 3 Quote Link to comment Share on other sites More sharing options...
Rignes Posted April 20, 2022 Share Posted April 20, 2022 34 minutes ago, Sirithiliel said: oof yea. i was very dissatisfied with that one. I heavily, heavily resculpted mine. Re-did the legs, made new horns, remade all four feet, sculpted in the propatagium, remade the face entirely. i would have redone every scale if i had had the energy That's dedication. Way more than I could muster. heh 5 Quote Link to comment Share on other sites More sharing options...
Popular Post ksbsnowowl Posted April 20, 2022 Popular Post Share Posted April 20, 2022 18 5 Quote Link to comment Share on other sites More sharing options...
Sirithiliel Posted April 20, 2022 Share Posted April 20, 2022 dang that would be nice in briarwood vale with the rest of the bees 😛 5 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.